My Account

Log in to Your Account

Not a member yet? It's FREE!

Join

Why Join? Gain access to exclusive pricing, rewards and more!

Member Pricing & Rewards active

(877) 571-7901

[email protected]

()

Shop By Category
Top Categories
Clamp Meters
Datacom and Networking Products
Dataloggers Data Acquisition
Signal Generators / Counters
Ground Testers
HVAC Equipment and Instruments
Life Sciences Equipment
Megohmmeter / Insulation Resistance Testers
Microscopes
Multimeters
Oscilloscopes
Power Measurement
Power Supplies
Process / Calibration
RF, Microwave, EMI
Safety Testing / Surge Testing
Soldering Equipment
Thermal Imagers
Shop All Categories
With a century of knowledge and product research behind them, Enerpac, best known for its hydraulic tools, can be your go-to for thousands of applications across every industry. SHOP NOW

Get up to 15% off with the FLIR Ex-Series sale! These cameras are powerful troubleshooting tools for building, electrical, and mechanical applications. With various available models, you can fit your target size, working distance, visual detail needs, and budget.SHOP NOW
Brands
- Rigol
- Megger
- Hioki
- Hakko
- Mastercool
Promotions
Clearance

Member Price INACTIVE
Create a FREE Account to Unlock Your Savings
Member Price ACTIVE

Tektronix AFG31152 - Arbitrary Function Generator (2 Channels, 150 MHz Max Frequency)

Name: Tektronix AFG31152 - Arbitrary Function Generator (2 Channels, 150 MHz Max Frequency)
Brand: Tektronix
SKU: TektronixAFG31152
Price: 9260.00 USD
Availability: InStock

0 reviews | Model: Tektronix AFG31152

Tektronix AFG31000 Arbitrary Function Generator

Images (4) | Videos (6)

Compare

Arbitrary Function Generator: 2-Ch, 150MHz Bandwidth, 2GSa/s sample rate, 16M pts arb memory, 14-bit vertical resolution, 5Vpp to 50ohm, traceable cal cert std.

Channels: 2
Max Frequency: 150 MHz
Memory: 16 MSa/ch
Sample Rate: 2 GS/s
Vertical Resolution: 14-bit
Patented InstaView™ technology enables engineers to see the actual waveform at the Device Under Test (DUT) in real time, without the need of an oscilloscope and probe, eliminating the uncertainty caused by mismatched impedance
Sequencing option adds the ability to program long, complex waveforms with up to 256 steps
The 9-inch capacitive touch screen works like a smart phone and has short-cuts to frequently used settings
Built-in ArbBuilder lets you create and edit arbitrary waveforms on the instrument, eliminating the need to connect to a PC
Outputs are protected from over voltage and current to minimize potential instrument damage
Built-in Double Pulse Test application to generate voltage pulses with varying pulse widths onto the DUTs

View Product Details

Your Price: $9,260.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99 - Code: FREESHIP
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded. - USE CODE FREESHIP at checkout

Valid on Web Price Only!
View Payment Options

Request Quote

Items in This Series



Product	Tektronix AFG31152 Arbitrary Function Generator: 2-Ch, 150MHz Bandwidth, 2GSa/s sample rat ...	Tektronix AFG31021 Arbitrary Function Generator: 1-Ch, 25MHz Bandwidth, 250MSa/s sample ra ...	Tektronix AFG31022 Arbitrary Function Generator: 2-Ch, 25MHz Bandwidth, 250MSa/s sample ra ...	Tektronix AFG31051 Arbitrary Function Generator: 1-Ch, 50MHz Bandwidth, 500MSa/s sample ra ...	Tektronix AFG31052 Arbitrary Function Generator: 2-Ch, 50MHz Bandwidth, 500MSa/s sample ra ...	Tektronix AFG31101 Arbitrary Function Generator: 1-ch, 100MHz Bandwidth, 1GSa/s sample rat ...	Tektronix AFG31102 Arbitrary Function Generator: 2-Ch, 100MHz Bandwidth, 1GSa/s sample rat ...	Tektronix AFG31151 Arbitrary Function Generator: 1-ch, 150MHz Bandwidth, 2GSa/s sample rat ...	Tektronix AFG31251 Arbitrary Function Generator: 1-ch, 150MHz Bandwidth, 2GSa/s sample rat ...	Tektronix AFG31252 Arbitrary Function Generator: 2-Ch, 250MHz Bandwidth, 2GSa/s sample rat ...
Price
In Stock
Arbitrary	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare

Recommended for you

Tektronix AFG31152 Accessories

Choose a Category

General Accessories

for the Tektronix AFG31152

Tektronix ACD4000B Soft Carrying Case

Catalog: ACD4000B

(0)

In Stock!

Add to Cart

Tektronix AFG31152 - Arbitrary Function Generator (2 Channels, 150 MHz Max Frequency)

Channels: 2
Max Frequency: 150 MHz
Memory: 16 MSa/ch
Sample Rate: 2 GS/s
Vertical Resolution: 14-bit

The Tektronix AFG31152 is a high-performance AFG with built-in arbitrary waveform generation, real-time waveform monitoring, and the largest touchscreen on the market. Providing advanced waveform generation and programming capabilities, waveform verification, and a modern touch-screen interface, the new AFG31152 is sure to delight and simplify the job of every researcher and engineer.

Basic and Advanced Modes

The AFG31152 is the industry’s first arbitrary function generator with full function Basic (AFG) and Advanced (Sequence) modes.

In Basic mode, the AFG31152 generates traditional functions and arbitrary waveforms. The touchscreen and front-panel controls make it simple to set up.

Basic mode lets you change frequency without the need to worry about waveform length and sample rate. This feature is useful in analog designs that characterize filter/amplifier frequency responses or in digital designs where clock rates change frequently

Key settings are visible at a glance, and are easy to adjust using touch, numeric keypad, or rotary controls

New with the AFG31152, Advanced mode provides the ability to generate multiple waveforms with complex timing. In this mode, you can compose a list (or a sequence) of 1 to 256 waveforms, with total waveform length up to 16 Mpts/ch (128 Mpts/ch optional) and define the ouput sequence of these waveforms. Repeat, go-to, wait, jump, and triggered events are all supported and the large memory provides space to store many waveforms or long waveforms.

This feature is very useful in applications where many test cases need to be performed sequentially. Instead of loading the test cases one by one, you can put all of them in a sequence and load at one time, switching from one to another seamlessly to greatly improve the test efficiency.

Advanced mode lets you build complex waveform sequences with flexible step controls

Sequenced sine waveforms with different frequency and amplitude.

Additionally, Advanced mode uses variable sample rate technology. Every sample in a waveform is output once and only once in each cycle, synchronized to the sample rate. Since there is no skipping or repetition, all details in the waveforms are kept. This feature is very useful for applications in which signal fidelity is extremely critical, such as IQ modulation and pulse train generation.

InstaView™ technology shows the actual waveform at the DUT

Most waveform generators assume they are driving a 50 Ω impedance. However, most devices under test do not have a 50 Ω impedance. This mismatch results in an inconsistency between the waveform as set on the AFG and the signal at the DUT.

With InstaView turned off, the AFG31152 works like a traditional function generator. Due to an impedance mismatch, the AFG display shows a different waveform from the one observed at the DUT

With the patented InstaView ™ technology, the AFG31152 can display the actual waveform at the DUT, instead of just the nominal waveform as set on the AFG. The waveform displayed on the AFG instantly responds to changes in frequency, amplitude, waveform shape, and impedance changes at the DUT. InstaView helps eliminate the uncertainty and measurement risk caused by impedance mismatches, without requiring additional cables, instruments, or effort.

With InstaView turned on, the AFG31152 shows the waveform as observed at the DUT

A large touch screen and smart user interface
The large 9-inch capacitive touch screen displays all related settings and parameters on a single screen. Similar to smart devices, you can tap or swipe to easily select, browse, locate and change settings and parameters. Frequently-used functions are immediately accessible. Familiar buttons and rotary knob controls are available for more traditional navigation.

Frequently used settings are easy to access from the swipe-up menu

Built-in ArbBuilder tool makes creating and editing arbitrary waveforms easier than ever

In the past, you needed a PC with waveform editing software to create or edit your arbitrary waveforms. The waveform would then need to be downloaded to the AFG using either a USB stick or a data cable connection. The process was time-consuming, especially when waveforms required frequent changes.

ArbBuilder is a built-in application on the AFG31152 that lets you create and edit your arbitrary waveforms directly on the generator. You can create arbitrary waveforms with the Equation Editor tool or start from a library of standard templates. Thanks to the large capacitive touch screen, you can drag, pinch and zoom to get the detail you need.

You can quickly replicate real-world waveforms captured with oscilloscopes or created by third-party software by loading CSV format data files directly into ArbBuilder from a USB memory stick.

Creating an arbitrary waveform using the easy touch screen interface

An on-screen wizard guides you through the process of multiple-unit synchronization

Double Pulse user interface

Double Pulse Test

The AFG31152 includes Double Pulse Test, a downloadable plugin software application that enables double pulse applications for the power and semiconductor markets. The Double Pulse Test user interface provides touch-and-swipe or point-and-click control for generating at least two varying pulse widths. These pulses can be output to an isolated gate driver to trigger power devices such as MOSFETs or IGBTs.

Simplified multi-unit synchronization

Most applications need one or two channels of output, but some applications require more channels. For example, in order to simulate3-phase power signals, engineers often need to synchronize three 2-channel generators; one for the voltage and current on each phase. Todo this used to be time-consuming, as it required many cable connections between the AFG units, and making changes in deep branches of the menu trees on all instruments.

Key features

Ready-to-use, ease of use, built-in applications that reduce test development time
Generate pulses with varying pulse widths
Pulse widths from 20 ns to 150 μs
GUI and large touchscreen display
Multi-triggers method: Manual, Continuous and External
Up to 30 pulses
Ohm or High Z output modes
Free to download from the website
Works on all of the AFG31000 models

Typical applications

R&D engineer and test engineer of semiconductor industry (power device and power module with SiC/GaN/Si)
Automotive industry (EV, EHV, FCV), laboratory and university of power electronics
Power device manufacturer
Heavy user of power device and module
Inverter and motor drive system

Model	Sine frequency range	Number of channels
AFG31021	25 MHz	1
AFG31051	50 MHz
AFG31101	100 MHz
AFG31151	150 MHz
AFG31251	250 MHz
AFG31022	25 MHz	2
AFG31052	50 MHz
AFG31102	100 MHz
AFG31152	150 MHz
AFG31252	250 MHz

Output characteristics

Amplitude

	AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
Range (into 50 Ω)	≤ 60 MHz: 1 mV P-P to 10 V P-P > 60 MHz to ≤ 80 MHz: 1 mV P-P to 8 V P-P > 80 MHz to ≤ 100 MHz: 1 mV P-P to 6 V P-P			≤ 200 MHz: 1 mV P-P to 5 V P-P > 200 MHz to ≤ 250 MHz: 1 mV P-P to 4 V P-P
Range (into open circuit or High-Z)	≤ 60 MHz: 2 mV P-P to 20 V P-P > 60 MHz to ≤ 80 MHz: 2 mV P-P to 16 V P-P > 80 MHz to ≤ 100 MHz: 2 mV P-P to 12 V P-P			≤ 200 MHz: 2 mV P-P to 10 V P-P > 200 MHz to ≤ 250 MHz: 2 mV P-P to 8 V P-P
Accuracy	± (1% of setting +1 mV P-P ) (1 kHz sine, 0 V offset, amplitude > 1 mV P-P )
Resolution	0.1 mV P-P , 0.1 mV RMS , 1 mV, 0.1 dBm or 4 digits
Units	Vpp, Vrms (excluding Arb and Noise), dBm (sine wave only), Volt (High Level and Low Level)

Offset

	AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
Range (into 50 Ω)	±(5 V PK - Amplitude P-P ÷ 2)			±(2.5 V PK - Amplitude P-P ÷ 2)
Range (into open circuit or High-Z)	±(10 V PK - Amplitude P-P ÷ 2)			±(5 V PK - Amplitude P-P ÷ 2)
Accuracy	± (1% of \|setting\| +1 mV + 0.5% of Amplitude (V P-P ))
Resolution	1 mV or 4 digits

Output impedance

50 Ω

Load impedance setting

Selectable: 50 Ω, 1 Ω to 10.0 kΩ, High Z (Adjusts displayed amplitude according to selected load impedance)

Isolation

42 Vpk maximum to earth ground

Short-circuit protection

Signal outputs are robust against permanent shorts against floating ground

Overcurrent protection

When incoming current is greater than 250 mA, the output channels are protected with relays that disconnect the AFG from the
device under test. Connection can be resumed by user after removing the incoming current

General characteristics - Basic mode

Basic (AFG)

Run modes

Continuous, Modulation, Sweep and Burst

Standard waveforms

Sine, Square, Pulse, Ramp, More (Noise, DC,Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine )

Arbitrary waveforms

Sampling clock: 250 MSa/s, 1 GSa/s or 2 GSa/s (model and waveform length apply)
Vertical resolution: 14 bits
Waveform length: 2 to 131,072 points

Sine

Frequency range

	AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
Continuous mode	1 μHz to 25 MHz	1 μHz to 50 MHz	1 μHz to 100 MHz	1 μHz to 150 MHz	1 μHz to 250 MHz
Burst mode	1 μHz to 12.5 MHz	1 μHz to 25 MHz	1 μHz to 50 MHz	1 μHz to 75 MHz	1 μHz to 125 MHz

Effective maximum frequency out

AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
25 MHz	50 MHz	100 MHz	150 MHz	250 MHz

Amplitude flatness (1 V P-P , relative to 1 kHz)

Frequency range	AFG31021, AFG31022, AFG31051, AFG31052, AFG31101, AFG31102	AFG31151, AFG31152, AFG31251, AFG31252
< 5 MHz	±0.2 dB	±0.2dB
≥ 5 MHz to 25 MHz	-----	±0.3 dB
≥ 5 MHz to 100 MHz	±0.3 dB	-----
> 25 MHz to 100 MHz	-----	±0.5 dB
> 100 MHz to 200 MHz	-----	±1.0 dB
> 200 MHz to 250 MHz	-----	±2.0 dB

Amplitude flatness (1 V P-P , relative to 1 kHz), typical

AFG31021, AFG31022, AFG31051, AFG31052, AFG31101, AFG31102, AFG31151, AFG31152	AFG31251 / AFG31252
±0.1 dB	≤ 150 MHz: ±0.1 dB > 150 MHz to 250 MHz: ±0.3 dB

Harmonic distortion (1 V P-P ), typical

Frequency range	AFG31021, AFG31022, AFG31051, AFG31052, AFG31101, AFG31102	AFG31151, AFG31152, AFG31251, AFG31252
10 Hz to <20 kHz	< -77 dBc	< -72 dBc
≥20 kHz to <1 MHz	< -72 dBc	< -74 dBc
≥1 MHz to <5 MHz	< -65 dBc	< -69 dBc
≥5 MHz to ≤100 MHz	< -56 dBc	< -37 dBc

THD, typical

≤ 0.04%, 10 Hz to 20 kHz, 1 V P-P

Spurious noise (1 V P-P ), typical

Frequency range	AFG31021, AFG31022, AFG31051, AFG31052, AFG31101, AFG31102	AFG31151, AFG31152, AFG31251, AFG31252
≥ 10 Hz to < 1 MHz	< -78 dBc	< -80 dBc
≥ 1 MHz to < 25 MHz	< -73 dBc	< -75 dBc
≥ 25 MHz to ≤ 100 MHz	< -78 dBc	< -75 dBc + 6 dBc/octave

Phase noise, typical

< -125 dBc/Hz at 20 MHz, 10 kHz offset, 1 V P-P

Residual clock noise, all models

-63 dBm

Square

Frequency range

AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
1 μHz to 20 MHz	1 μHz to 40 MHz	1 μHz to 80 MHz	1 μHz to 120 MHz	1 μHz to 160 MHz

Rise/fall time, typical

	AFG31021/ AFG31022	AFG31051/ AFG31052	AFG31101/ AFG31102	AFG31151/ AFG31152	AFG31251/ AFG31252
Amplitude ≤ 5 Vpp	≤ 7.0 ns	≤ 5.0 ns	≤ 3.5 ns	≤ 3.0 ns	≤ 2.0 ns
Amplitude > 5 Vpp	≤ 8.0 ns	≤6.0 ns	≤ 4.2 ns	-----	-----

Overshoot, typical

< 3%

Jitter (RMS), typical

2.5 ps

Ramp

Frequency range

AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
1 μHz to 500 kHz	1 μHz to 800 kHz	1 μHz to 1 MHz	1 μHz to 1.5 MHz	1 μHz to 2.5 MHz

Linearity, typical (1 kHz, 1 V P-P ,
100% symmetry)

AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
≤ 0.1% of peak output	≤ 0.1% of peak output	≤ 0.15% of peak output	≤ 0.2% of peak output	≤ 0.2% of peak output

Symmetry

0% to 100%

Pulse

Frequency range

AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
1 μHz to 20 MHz	1 μHz to 40 MHz	1 μHz to 80 MHz	1 μHz to 120 MHz	1 μHz to 160 MHz

Pulse width

AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
16 ns to 999.99 s	10 ns to 999.99 s	6 ns to 999.99 s	4 ns to 999.99 s	3 ns to 999.99 s

Pulse width resolution

10 ps or 5 digits

Pulse Duty

0.001% to 99.999% (limitations of pulse width apply)

Edge transition time

AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
8 ns to 0.625 * Pulse Period	6 ns to 0.625 * Pulse Period	4 ns to 0.625 * Pulse Period	3 ns to 0.625 * Pulse Period	2 ns to 0.625 * Pulse Period

Edge transition time resolution

10 ps or 4 digits

Lead delay range

Mode	Characteristic
Continuous	0 ps to Period
Burst	0 ps to Period – [ Pulse Width + 0.8 * (Leading Edge Time + Trailing Edge Time)]

Lead delay resolution

10 ps or 8 digits

Overshoot, typical

< 2%

Jitter (RMS), typical

2.5 ps

Range (into 50 Ω)

AFG31021, AFG31022, AFG31051, AFG31052, AFG31101, AFG31102	AFG31151, AFG31152, AFG31251, AFG31252
-5 V to 5 V	-2.5 V to 2.5 V

Resolution (into 50 Ω)

1 mV or 4 digits

Accuracy

± (1% of |setting | +1mV)

Noise

Bandwidth (-3 dB)

AFG31021, AFG31022, AFG31051, AFG31052, AFG31101, AFG31102	AFG31151, AFG31152, AFG31251, AFG31252
150 MHz	360 MHz

Noise type

White Gaussian

Internal noise

	Characteristic
Add	When activated, output signal amplitude is reduced to 50%
Level	0.0% to 50% of amplitude (V P-P ) setting
Resolution	1%

Other waveforms

Frequency range

AFG31021/AFG31022	AFG31051/AFG31052	AFG31101/AFG31102	AFG31151/AFG31152	AFG31251/AFG31252
1 μHz to 500 kHz	1 μHz to 800 kHz	1 μHz to 1 MHz	1 μHz to 1.5 MHz	1 μHz to 2.5 MHz

Arbitrary waveforms

Frequency range

	AFG31021 / AFG31022	AFG31051 / AFG31052	AFG31101 / AFG31102	AFG31151 / AFG31152	AFG31251 / AFG31252
Normal	1 mHz to 12.5 MHz	1 mHz to 25 MHz	1 mHz to 50 MHz	1 mHz to 75 MHz	1 mHz to 125 MHz
Burst mode	1 mHz to 6.25 MHz	1 mHz to 12.5 MHz	1 mHz to 25 MHz	1 mHz to 37.5 MHz	1 mHz to 62.5 MHz

Effective analog bandwidth
(-3 dB)

AFG31021, AFG31022, AFG31051, AFG31052, AFG31101, AFG31102	AFG31151, AFG31152, AFG31251, AFG31252
150 MHz	360 MHz

Waveform length

2 to 131,072

Sample rate

	AFG31021 / AFG31022	AFG31051 / AFG31052	AFG31101 / AFG31102	AFG31151 / AFG31152	AFG31251 / AFG31252
Waveform length ≤ 16,384	250 MSa/s	1 GSa/s	1 GSa/s	2 GSa/s	2 GSa/s
Waveform length > 16,384	250 MSa/s	250 MSa/s	250 MSa/s	250 MSa/s	250 MSa/s

Vertical resolution

14 bit

Rise/fall time, typical

	AFG31021 / AFG31022	AFG31051 / AFG31052	AFG31101 / AFG31102	AFG31151 / AFG31152	AFG31251 / AFG31252
Amplitude ≤ 5Vpp	≤ 3.5 ns	≤ 3.5 ns	≤ 3.5 ns	≤ 2 ns	≤ 2 ns
Amplitude > 5Vpp	≤ 4.2 ns	≤ 4.2 ns	≤ 4.2 ns	-----	-----

Jitter (RMS), typical

2.5 ps

Modulation

AM, FM, PM

Specifications	Characteristic
Carrier	All except pulse, noise, DC
Source	Internal or external
Internal modulating waveform	Sine, Square, Ramp, Noise, ARB (maximum waveform length: AM 131,072 pts; FM/PM/PWM 2,048 pts)
Internal modulating frequency	1 mHz to 1 MHz

AM modulation depth

0.0 % to 120 %

AM modulation resolution

0.1%

Minimum FM peak deviation

Maximum FM peak deviation

	AFG31021/ AFG31022	AFG31051/ AFG31052	AFG31101/ AFG31102	AFG31151/ AFG31152	AFG31251/ AFG31252
Sine	12.5 MHz	25 MHz	50 MHz	75 MHz	125 MHz
Square	10 MHz	20 MHz	40 MHz	60 MHz	80 MHz
Arb	6.25 MHz	12.5 MHz	25 MHz	37.5 MHz	62.5 MHz
Others	250 kHz	400 kHz	500 kHz	750 kHz	1.25 MHz

PM phase deviation range

0° to 180°

PM phase resolution

0.1°

FSK

Specifications	Characteristic
Carrier	All except pulse, noise, DC
Source	Internal or external
Number of keys	2
Internal key rate	1 mHz to 1 MHz

PWM

Specifications	Characteristic
Carrier	Pulse
Source	Internal or external
Number of keys	Sine, Square, Ramp, Noise, ARB (maximum waveform length: 2,048 pts)
Internal key rate	1 mHz to 1 MHz
Deviation range	0% to 50.0% of pulse period

Sweep

Type

Linear, Logarithmic

Waveforms

All, except Pulse, Noise, DC

Sweep time

1 ms to 500 s

Hold/return time

0 s to 500 s

Maximum total sweep time

500 s
Accuracy, typical: ≤ 0.4%

Minimum start/stop frequency

All except ARB: 1 μHz
ARB: 1 mHz

Burst

Waveform

All except Noise, DC

Type

Triggered, gated

Burst count

1 to 1,000,000 cycles or Infinite

Intenal trigger rate

1 μs to 500.0 s

Gate and trigger sources

Internal, external, remote interface

InstaView™

Waveforms

All except noise

Cable (channel output to load)

50 Ω BNC to BNC

Run mode

Continuous in Basic mode

Maximum measurement range
(DC + peak AC voltage)

FG31021, AFG31022, AFG31051, AFG31052, AFG31101, AFG31102	AFG31151, AFG31152, AFG31251, AFG31252
-10 V to 10 V	-5 V to 5 V

DC level measurement

Specifications	Characteristic
Accuracy (into 50Ω), typical	± (2 % of \|setting\| + 20 mVpp)
Resolution	1 mV or 4 digits

Amplitude measurement

Specifications	Characteristic
Accuracy (sine, 1 kHz, 1 V P-P , into 50 Ω, typical)	± (2 % of setting + 20 mV)
Resolution	1 mV or 4 digits

Bandwidth (-3 dB)

500 MHz

Flatness, sine, 1 V P-P , into
50 ohm, relative to 1 kHz, typical

AFG31021 / AFG31022 AFG31051 / AFG31052 AFG31101 / AFG31102	AFG31151 / AFG31152 AFG31251 / AFG31252
0 to 100 MHz: ±1 dB	0 to 200 MHz: ±1 dB 200 MHz to 250 MHz: ±2 dB

Cable propagation delay measurement, typical

Specifications	Characteristic
Range	0 to 20 ns (approximately 4 m/13 feet in length)
Accuracy, typical	± 500 ps

Physical characteristics

Dimensions

Height

191.8 mm (7.55 in.)

Width

412.8 mm (16.25 in.)

Depth

143.3 mm (5.64 in.)

Weight

Net

4.7 kg (10.4 lb.)

Shipping

7.0 kg (15.4 lb.)

EMC, environment, and safety

Temperature

Operating

0 °C to +50 °C (32 °F to 122 °F)

Nonoperating

-30 °C to +70 °C (-22 °F to 158 °F)

Humidity

Operating

≤ 80%, 0 °C to 40 °C (32 °F to104 °F)
≤ 60%, > 40°C to 50°C (104 °F to 122 °F), noncondensing

Nonoperating

5% to 90%, < 40 °C (< 104 °F), noncondensing
5% to 80%, ≥ 40 °C to 60 °C (≥ 104 °F to 140 °F), noncondensing
5% to 40%, > 60 °C to 70 °C (> 140 °F to 158 °F), noncondensing

Altitude

Operating

Up to 3,000 m (9,842 ft.)

Nonoperating

Up to 12,000 m (39,370 ft.)

EMC compliance

EN61326-1:2013, EN 61326-2-1:2013

European Union

EU Council Directive 2004/108/EC

EMC, environment, and safety

Safety

UL 61010-1:2004
CAN/CSA C22.2 No. 61010-1:2004
IEC 61010-1:2001

Over-temperature protection

Instrument is protected from over-temperature by turning off outputs

Generators / Counters/Function Generator Template
Arbitrary	Yes
Test Equipment General Attributes
Data Logging	Yes
Country of Origin	China

0

Out of 5

Average Customer Review

Share your thoughts with other customers

Write a Review

Add to cart

Compare

Real people, here to help you.

Get Connected

Join the community and find out what we're up to, experience live product releases, webinars and more!

How Can We Help You?

Questions?

Log in to Your Account

Not a member yet? It's FREE!

Top Categories

Tektronix AFG31152 - Arbitrary Function Generator (2 Channels, 150 MHz Max Frequency)

Items in This Series

Recommended for you

Tektronix AFG31152 Accessories

for the Tektronix AFG31152

Tektronix ACD4000B Soft Carrying Case

Tektronix AFG31152 - Arbitrary Function Generator (2 Channels, 150 MHz Max Frequency)

Basic and Advanced Modes

Key settings are visible at a glance, and are easy to adjust using touch, numeric keypad, or rotary controls

Advanced mode lets you build complex waveform sequences with flexible step controls

Sequenced sine waveforms with different frequency and amplitude.

InstaView™ technology shows the actual waveform at the DUT

With InstaView turned off, the AFG31152 works like a traditional function generator. Due to an impedance mismatch, the AFG display shows a different waveform from the one observed at the DUT

With InstaView turned on, the AFG31152 shows the waveform as observed at the DUT

Frequently used settings are easy to access from the swipe-up menu

Built-in ArbBuilder tool makes creating and editing arbitrary waveforms easier than ever

Double Pulse Test

Simplified multi-unit synchronization

Key features

Typical applications

Generators / Counters/Function Generator Template

Test Equipment General Attributes

0

Featured Review

We'd love to hear from you

Real people, here to help you.

Get Connected

My Account

Promotions & Offers

Resources

Company