| Channels |
1 |
| Waveforms |
Sine, Square, Pulse, Ramp, Noise, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, and Haversine |
| Sine Wave |
1 ±Hz to 20 MHz |
| Sine Wave in Burst Mode |
1 ±Hz to 10 MHz |
| Effective Maximum Frequency Out |
20 MHz |
| Amplitude Flatness (1 Vp-p) |
| <5 MHz |
±0.15 dB |
| 5 MHz to 20 MHz |
±0.3 dB |
| Harmonic Distortion (1 Vp-p) |
| 10 Hz to 20 kHz |
<±70 dBc |
| 20 kHz to 1 MHz |
<±60 dBc |
| 1 MHz to 10 MHz |
<±50 dBc |
| 10 MHz to 20 MHz |
<±40 dBc |
| THD |
<0.2% (10 Hz to 20 kHz, 1 Vp-p) |
| Spurious (1 Vp-p) |
| 10 Hz to 1 MHz |
<±60 dBc |
| 1 MHz to 20 MHz |
<±50 dBc |
| Phase Noise, Typical |
20 MHz: <±110 dBc/Hz at 10 kHz offset, 1 Vp-p |
| Residual Clock Noise |
±63 dBm |
| Square Wave |
1 ±Hz to 10 MHz |
| Rise/Fall Time |
< 18 ns |
| Jitter (RMS), Typical |
< 500 ps |
| Ramp Wave |
1 ±Hz to 200 kHz |
| Linearity |
<0.1% of peak output at 10% to 90% of amplitude range |
| Symmetry |
0.0% to 100.0% |
| PulseWave |
1 mHz to 10 MHz |
| Pulse Width |
30.00 ns to 999.99 s |
| Resolution |
10 ps or 5 digits |
| Pulse Duty |
0.001% to 99.999% (Limitations of pulse duty width apply) |
| Edge Transition Time |
18 ns to 0.625 ± Pulse Period |
| Resolution |
10 ps or 4 digits |
| Lead Delay |
| Range |
Continuous Mode: 0 ps to Period Trigger/Gate Burst Mode: 0 ps to Period ± [Pulse Width + 0.8 ± (Leading Edge Time + Trailing Edge Time)] |
| Resolution |
10 ps or 8 digits |
| Overshoot, Typical |
<5% |
| Jitter (RMS), Typical |
<500 ps |
| Other Waveforms |
1 ±Hz to 200 kHz |
| Noise Bandwidth(±3 dB) |
20 MHz |
| Noise Type |
White Gaussian |
| DC (into 50 Ω) |
±5 V to +5 V |
| Arbitrary Waveforms |
1 mHz to 10 MHz |
| Waveforms in Burst Mode |
1 mHz to 5 MHz |
| Arbitrary Waveforms in Burst Mode |
1 mHz to 5 MHz |
| Effective Analog Bandwidth (±3 dB) |
34 MHz |
| Nonvolatile Memory |
4 waveforms |
| Memory |
Sample Rate: 2 to 128k: 250 MS/s |
| Vertical Resolution |
14 bits |
| Rise/Fall Time |
≤20 ns |
| Jitter (RMS) |
4 ns |
| Amplitude, 50 Ω Load |
10 mVp-p to 10 Vp-p |
| Amplitude, Open Circuit |
20 mVp-p to 20 Vp-p |
| Accuracy |
±(1% of setting + 1 mV), (1 kHz sine waveform, 0 V offset, >10 mVp-p amplitude) |
| Resolution |
0.1 mVp-p, 0.1mVRMS, 1 mV, 0.1 dBm, or 4 digits |
| Units |
Vp-p, VRMS, dBm(sine wave only) |
| Output Impedance |
50 Ω |
| Load Impedance Setting |
Selectable: 50 Ω, 1 Ω to 10.0 kΩ, High Z (adjusts displayed amplitude according to selected load impedance) |
| Isolation |
<42 VPeak maximum to earth |
| Short-circuit Protection |
Signal outputs are robust against permanent shorts against floating ground |
| External Voltage Protection |
To protect signal outputs against external voltages use fuse adapter 013-0345-00 |
| DC Offset Range, 50 Ω Load |
±(5 VPeak ± amplitude Vp-p/2) |
| DC Offset Range, Open Circuit |
±(10 VPeak ± amplitude Vp-p/2) |
| Accuracy |
±(1% of |setting| + 5 mV + 0.5% of amplitude (Vp-p)) |
| Resolution |
1 mV |
| Frequency Setting Resolution |
1 μHz or 12 digits |
| Phase (except DC, Noise, Pulse) |
| Range |
–360° to +360° |
| Resolution |
Sine: 0.01°
Other Waveforms: 0.1° |
| Internal Noise Add |
When activated, output signal amplitude is reduced to 50% |
| Level |
0.0% to 50% of amplitude (Vp-p) setting |
| Resolution |
1% |
| Main Output |
50 Ω |
| Effective Frequency Switching Speed |
2 ms through remote control |
| Internal Frequency Reference |
| Stability |
All except ARB: ±1 ppm, 0 °C to 50 °C
ARB: ±1 ppm, ±1 μHz, 0 °C to 50 °C |
| Aging |
±1 ppm per year |
| Power Source |
100 V to 240 V, 50 Hz to 60 Hz or 115 V, 400 Hz |
| Power Consumption |
60 W |
| Warm-up Time, Typical |
20 minutes |
| Power On Self Diagnostics, Typical |
<10 s |
| Acoustic Noise, Typical |
<50 dBA |
| Display |
3.5 in. Color TFT LCD |
| User Interface and Help Language |
English, French, German, Japanese, Korean, Simplified and Traditional Chinese, Russian (User selectable) |