Unheated Baths

Designed to be used with a clip-on Tempette or Tempunit thermoregulator, these baths are equipped with carrying handles for added safety. All baths have stoved enameled steel outer cases and are supplied with bridge mounting plate to hold the thermoregulator.

Polypropylene spheres can be used to create a ball blanket so as to reduce evaporation and heat loss, while providing instant access to the bath.

Water Baths

A comprehensive range of general purpose water baths are available from Techne. Twenty different water bath combinations allow the use of accurate temperatures from -40ºC up to 200ºC; ensuring a solution for most laboratory applications.

First select the unheated stainless steel bath which has the appropriate volume for the application, for example B-26 which has a volume of 26 liters.

Then add a thermoregulator suitable for the required temperature range, for example the TE-10D Tempette is a digital thermoregulator for temperatures between -40ºC and 120ºC.

Select any accessories that are required, for example, both gabled and flat lids are available for all bath sizes. Gabled lids particularly allow tall tubes to be accommodated.

If sub-ambient temperatures are required it is necessary to add a cooling mechanism to the bath. Techne recommends the use of a Dip or Flow Cooler for temperatures down to -35ºC. For example, the RU-200 can lower temperatures down to -20ºC. It is also possible to use the cooling coil with a water supply for temperatures from 5ºC above the water temperature to ambient.