Techne FINSALO Aluminium Insert 1 x 3/ 4 inch And 1 x 1/ 4 Inch Probes

Techne FINSALO Aluminum lnsert Probes for UCAL400+ & Tecal 140/ 425. These insert blocks are precision machined to give an optimum probe fit from high quality Aluminium with an immersion depth of 114mm.

Techne’s UCAL400+ calibrator heater provides a safe, dry,constant temperature source. It is fast and economical and can be used either on a bench top or as a portable field unit. The weight of the unit is only nine pounds/four kilograms. The unit covers the temperature range from 5°C above ambient up to 430°C using a machined aluminum insert block as the heat transfer medium. The temperature control circuit is built into the unit.

The Tecal 140 is part of a new range of light-weight and portable field Dri-Block calibrators. This model operates from 45°C below ambient (typically -20°C) up to 140°C.

Tecal 425S and Tecal 425H calibrators are use large aluminium heater blocks for rapid heating and cooling rates which provide high accuracy, uniformity and stability up to 425°C.

S Version just set required temperature and calibrate.
H Version set required temperature and calibrate, also programmable via Techne Works PC software, also can perform switch test with variable ramp rate.