Techne FINSABG Aluminum Bronze Insert 3 /8 inch 5 /16 inch 1 /4 inch 3 /16 inch 1 /8 inch Probes

These insert blocks are precision machined to give an optimum probe fit from high quality aluminum bronze with an immersion depth of 152 mm for use in the Tecal 650 and 700X Large interchangeable insert version units.

The Tecal 700X Block calibrator utilizes a special heater block design giving optimum temperature uniformity and rapid heating rates. The block has 6 fixed bores either metric or imperial sizes with a slim insert matching any of the bores. This block is designed to give unrivaled uniformity across the block but also allow the maximum flexibility between test probe sizes. The block design allows fast heat up and cool down rates while minimizing the weight of the unit.

The 650 models have large aluminum-bronze blocks which can house large single or multi hole inserts. These inserts can accommodate probes to a depth of 152.4 mm providing high stability and uniformity. All models are equipped with high-powered band heaters and two fans in order to rapidly heat and cool the temperature probe block to the required range of temperatures.

S Version: Set required Temperature and Calibrate
H Version: Set required Temperature and Calibrate also programmable for switch test and ramp rate etc.