IFB-131 with Automatic Airflow Control 480V, 60Hz, 3-phase

The Techne IFB-131 industrial fluidized bath is used for safe, efficient and cost effective cleaning of tooling, components, systems and parts (dies, breaker plates, nozzles, tools, tips, spinnerets, extruder screws, manifolds, etc).

Techne industrial fluidized baths will remove almost all polymers, including plastic, paint, epoxy, rubber and adhesives, as well as other hydrocarbon-based products such as oils, fluids, grease, lubricants and coatings.

Parts immersed into the fluidized bath are cleaned by the high temperature environment within a bath media of fluidized aluminum oxide that instantly starts to degrade plastic to carbon, which then leaves the bath as CO2. This instant heating and minimized quenching gives shorter cleaning times than with conventional ovens, and with the even and consistent heat of the bath, results in greatly reduced metal fatigue and tool damage.

The baths can be fluidized with either compressed house air or an inert gas such as nitrogen or argon. It should be noted that fluidized baths and the action created in the aluminum oxide is not abrasive to items immersed for normal cleaning or heat treatment times. Typical cleaning times range from 30 minutes to 2 hours depending on bath loading, temperature and amount of material to be cleaned.