This ESD jacket is designed to ground the garment and wearer through a ground cord connected to the 4mm stainless steel hip pocket snap. This allows for hands-free movement without tethering one hand, which is required when using a wrist strap connected to a ground cord. The lightweight fabric makes this style one of our most popular garments. The surface resistivity of the fabric is 1x10⁵ and the sleeve-to-sleeve resistance of the garment is guaranteed to stay below 3.5x10⁷ for 100 washes or 2 years.

This V-neck jacket comes with 4mm male ground snaps on the hip pockets. This snap connection is for attaching a standard ground cord. Using the garment in this way eliminates the need for a wrist strap. This connection is also used for testing and/or monitoring that the garment and the wearer are grounded. The “Reaching Hand Symbol” next to the breast pocket indicates that this garment is a tool for the prevention of static discharge.

• V-neck jacket
• ESD Cuffs grounding
• Lightweight OFX-100 fabric
• Knee-length coat
• Available in Burgundy
• Medium thru X-Large size range
• 3 Pockets
• Front snap closure
• ANSI/ESD STM2.1-Cat. 3

• Burgundy
• Meets normal FR requirements for polyester fabrics
• Fabric will not crock or bleed off onto other surfaces
• Fabric content 87% texturized polyester and 13% Shakespeare Conductive Fibers
• Carbon-suffused monofilament nylon is Shakespeare Resistat fiber is conductive at 104 and is non-flaking and non-sloughing
• Surface resistivity of fabric is 105 ohms per square
• Static decay rate per 101°C method 5000 volts to 500 in less than 0.1 seconds

All Tech Wear garments made of OFX-100 fabric with our ESD knit cuffs or the “Key option” used as recommended, will meet the requirements of the National ESD Association’s ANSI/ESD STM 2.1-2013, Category 3, “Garment used as primary grounding path for personnel” and/or “Grounded through a single wire constant monitor system”, and will maintain these performance characteristics for a minimum of 100 washes or 2 years, whichever comes first.

Wash in cool or cold water with any commercially-available liquid detergent, and hang dry or dry at 120°F or less. Do not use bleach, fabric softener, or iron. The carbon-suffused monofilament nylon is sensitive to heat and should not be exposed to drying heat in excess of 120°F. Wash at 90°F (Maximum) and tumble dry at low heat or hang dry. This lightweight fabric will dry very quickly and we recommend hang-drying for maximum life.