Skip to main content

My Account

Log in to Your Account

Sign in to see your member price, rewards, orders, tracking and more.

Sign In

Not a member yet? It's FREE!

Join

Why Join? Gain access to exclusive pricing, rewards and more!

Member Pricing & Rewards active

TSI PAN231-110 Positive and Negative Duct Accreditation System

1 (1 Review) | Model: TSI ALNOR PAN231-110

TSI PAN231 Duct Leakage Tester

Compare

Duct Leakage Tester with Inst., 110V. Includes

Cannot Ship Air

Positive and Negative Duct Leakage Testing in one system
Find and fix duct leaks to save energy
High accuracy gives confidence in measurements
High-flow fan for testing large duct sections
Pressurizes duct quickly, allowing testing to begin in minutes
Fits in the back of vans and trucks
Weight 121 lbs. (55 kg)
Includes TSI VelociCalc® Model 9565-P and DP-Calc™ 5815

View Product Details

List Price: $10,880.00

Your Price: $9,792.00

Sign-in for EDU Pricing!

In Stock:

View Payment Options

Recommended for you

The Positive and Negative Duct Accreditation (PANDA) System Model PAN231 provides contractors, commissioning engineers, and research and development technicians with best-in-class choice of test equipment to quantify air leakage in ductwork and other areas as well as the ability to measure the performance of ducted systems. PAN231-110 power requirements are 110 to 120 V, 1 Phase, 50/60 Hz, 16A.

Pass/Fail Reporting For Standards:

SMACNA HVAC Air Duct Leakage Test Manual
EN12237 Ventilation for Buildings – Ductwork – Strength & Leakage of Circular Sheet Metal Ducts
EN1507 Ventilation for Buildings – Sheet Metal Ducts with Rectangular Section – Requirements for Strength and Leakage
EUROVENT 2/2 Air Leakage Rate in Sheet Metal Air Distribution System

Applications:

Facility managers
HVAC installers

Pressure Measurement (5815)
Range	±15 in. W.G. (±3,735 Pa)
Resolution	0.001 in. W.G. (0.1 Pa)
Accuracy	1% of reading ±0.005 in. W.G. (±1 Pa)
Actual Duct Static Range	±10 in. W.G. (±2,500 Pa) at Zero Flow
Volume Flow Measurement (9565-P)
High leakage range	Wilson Radial Flow Grid 21 to 424 cfm (10 to 200 l/s), 36 to 720 m3/hr
Low leakage range Conical Inlet Nozzle Adapter	2 to 27.5 cfm (1 to 13 l/s), 3.6 to 46.9 m3/hr
Resolution	0.01 cfm (0.01 l/s), 0.01 m3/hr
Accuracy	±2.5% of reading ±0.02 cfm (±0.01 l/s), ±0.04 m3/hr
Temperature Measurement (9565-P)
K Type thermocouple probe	To EN60584 (IEC 584)
Range	-40 to 1200°F (-40 to 650°C)
Resolution	0.1°F (0.1°C)
Accuracy	±0.1% of reading ±2°F (±0.056% of reading ±1.1°C)
Barometric Pressure Measurement (9565-P)
Range	20.36 to 36.648 in. Hg (690 to 1,241 hPa),517.5 to 930.87 mm Hg
Accuracy	±2% of reading
Power requirements	110 to 120 V, 1 Phase, 50/60 Hz, 16A
Weight	121 lbs (55 kg)
Dimensions (L x W x H)	44.5 in. x 26 in. x 20 in. (1,130 mm x 660 mm x 510 mm)

Tech Specs

Blower Door and Duct Testing/Duct Testing Systems Template
Automatic Air Flow Measured	Yes
Test Equipment General Attributes
Unique Features	110 to 120 V 1 Phase 50/60 Hz, 16A
Warranty	24 YEARS
Warranty Details	a. Hot-wire or hot-film sensors used with research anemometers, and certain other components when indicated in specifications, are warranted for 90 days from the date of shipment; b. Pumps are warranted for hours of operation as set forth in product or operator’s manuals; c. Parts repaired or replaced as a result of repair services are warranted to be free from defects in workmanship and material, under normal use, for 90 days from the date of shipment; d. Seller does not provide any warranty on finished goods manufactured by others or on any fuses, batteries or other consumable materials. Only the original manufacturer's warranty applies; e. Unless specifically authorized in a separate writing by Seller, Seller makes no warranty with respect to, and shall have no liability in connection with, goods which are incorporated into other products or equipment, or which are modified by any person other than Seller.
Product Weight	121 LBS
Product Height	20 IN
Product Length	44.5 IN
Product Width	26 IN
Country of Origin	United States

Start typing your question...

Answers (1) - Asked by Anonymous

I have this question too (0)

The latest standards (see above) require that ducting be subjected to test pressures, both positive and negative, not lower than its design operating pressure.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

There are 2 versions of the PANDA - (1) 208-240v/1Ph/50-60hz and (2) 110-120v/1Ph/50-60hz.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

BS EN 12237:2003. Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts. BS EN 1507:2006. Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage. DW/143 HVCA: A practical guide to Ductwork leakage testing. Eurovent 2/2 - 1996. Air leakage rate in sheet metal air distribution systems.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

Yes! The product uses the latest inverter technology to offer quiet and efficient operation.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

Yes! The product was designed to fit into the back of most estate cars, some larger hatchbacks, and small vans.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

Yes! Again, using the latest inverter technology offers precise, stable control over its wide operating range.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

The PANDA was designed to cover or improve upon the pressure operating range covered by both the HVLT and the LVLT. The working flow range was designed to be suitable for the majority of applications. The PANDA cannot achieve the maximum flow from the LVLT and was never intended to do so as the extra size required to achieve this would be prohibitive with regards to transportation.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

No, it should no be exposed to damp or wet conditions.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

All TA465-P or TA460-P units that shipped after 20 August 2009 include the Duct Leakage Application as standard, and can be used for the leakage measurement. If you have a TA460-P that shipped before 20 August 2009, it needs to be returned to TSI for a firmware upgrade. For the static pressure measurement, we recommend using a PVM610 or PVM620.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Answers (1) - Asked by Anonymous

I have this question too (0)

Yes! Provided the TA465-P or TA460-P is used, the leakage rate is corrected for density to standard conditions.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

1

Out of 5

Average Customer Review

View All Reviews

Share your thoughts with other customers

Write a Review

Displaying 1 review

Most Helpful First | Newest First

uoutofyourmind

1.0

This cost is ridiculous, almost as much as my spelling is horrible. the cost is outrageous? who has this kind of disposable money in this business?? What am I doing wrong?

Anonymous on Jan 16, 2017

Add to cart

Compare

We'd love to hear from you

(877) 571-7901

Local: (732) 728-2590

Send us an email

Live Chat

Real people, here to help you.

Get Connected

Join the community and find out what we're up to, experience live product releases, webinars and more!

My Account

Promotions & Offers

Resources

Company

X