TPI 9041 Condition Based Monitoring

0 reviews | UPC: 637623090202 | Model: TPI 9041

Compare

Ultra II

Automatically detects out of balance, misalignment, looseness and bearing defects
Predictive analysis capabilities that accurately calculate time frame to failure
Condition based monitoring analyzes bearing wear and gear degradation
Built-in single plane balancing enables correction of the most common cause of vibration. (Dual plane balancing with additional accelerometer)
Additional features include Inspection, Lube and remote/server database
User selectable defined envelope filters and demodulation functionaliy
True simultaneous 3 channel capture
High resolution (0.2Hz) frequency spectra from 2Hz to 10kHz
Rugged fully waterproof construction meets IP68 and MIL-STD-810F requirements
Includes C-Trend powerful and easy to use asset management and fault diagnosis software

View Product Details

List Price: $7,995.00

In Stock:

View Payment Options

Recommended for you

The TPI Model 9041 Ultra II represents the very latest in easy to use high specification maintenance tools, offering extremely high levels of functionality and capability at a very affordable price! As a high spec CBM data collector and Dynamic 2 plane rotor balancer designed for plant and asset inspections, the Ultra II does it all.

C-Trend Software gives you greater ease of use and flexibility.

Store, analyze and report on all your vibration, lube and process parameters (e.g. oil pressures, lube volume, temperature, run hours, etc.) in one place.
All information is just a click away. Color coded alarms highlight problems. Trend lines show problems before they happen.
Data can be accessed anywhere on any machine, with optional networking software. Plant history is everything and C-Trend turns it into useful information with the click of a mouse!

Model 9041 Ultra II C-Trend II Software Functionality

Condition Based Maintenance data collector:

Displays sites, assets and measurements in a “tree” structure to give easy navigation of routes and capture of readings using touch screen and numeric keypad.
Analyses and displays ISO vibration levels, bearing wear, unbalance, misalignment, looseness etc.
Color coded with alarm status (red, amber & green).
Fully zoom-able frequency spectrum and time waveforms
All data automatically downloaded to C-Trend (PC trending analysis and reporting software included as standard)
Optional auto identification of measurement points using RFID tags with easy to use set up wizards

Single plane and two plane dynamic balancer:

Single and two plane software included, you need an additional accelerometer A9012 for two plane balancer
Balances to user defined grades using simple to use step by step balancing wizard
Live vector display shows out of balance and phase angle during balancing runs (ideal for checking stability)
Built-in tool kit for trial weight calculation, weight splitter, drill depth (for weight removal), coast down etc.
Downloads all balance data and graphs to PC full color report generator wizard

Inspection system:

User defined inspections can be run to capture data and trend process variables (e.g. temperature, pressure, run hours etc.) using simple wizards
Automatic reporting and generation of email alerts for any parameter

Size	8.7” x 3.7” x 1.8” (220 mm x 95mm x 45mm)
Weight	1.1 lb (500g)(not including accelerometer)
Environmental	Water: MIL-STD-810F, Method 512.4 IP67 sealed against accidental immersing (1m for 30 min) Drop: MIL-STD-810F, Method 516.5, Procedure IV 26 drops from 1.22 m 6 additional drops at -4°F (-20°C) 6 additional drops at 140°F (60°C) Operating: -22° to 149°F (-30° to 65°C) Storage: -40° to 158°F (-40° to 70°C) Humidity: MIL-STD-810F, Method 507.4 Sand and Dust: IP67, Mil-STD-810F, Method 510.4, Procedures I and II
Power supply	Rechargeable battery (charger included)
Battery life	Typically 20 hours operating time depending on backlight usage
Frequency ranges	2 Hz to 1 kHz 2 Hz to 10 kHz
Frequency Resolution	Up to 0.02 Hz 400, 800, 1600, 3200, 6400,12800, 25,600 or 51,200 lines FFT
Displayed Amplitude Units	Acceleration in g Velocity in mm/s ( or inches/s) Bearing noise in BDU (bearing damage units) Displacement in Microns/Mils
Displayed Frequency Units	Hertz (Hz), RPM or CPM
Dynamic range	96 dB +/- 50g to +/- 50g with standard accelerometer
Auto set up of VA diagnostic bands (RPM = run speed)	Instability, unbalance, misalignment & diagnostic bands looseness
Envelope demodulation filters	Fully user selectable high pass and low pass filter cut off frequencies
IEPE accelerometer interface	Constant current accelerometer power supply (+20 volts @ 2mA) can be switched off for use w/ BNC output control panels Supplied with BNC connection lead
Numeric Keypad or Touch screen operation	Stylus free collection of vibration data using numeric key pad or by touching screen
Included accessories	Tachometer, accelerometer (one) and cables, tachometer mount adapter Carrying case with shoulder strap

Reliability / Preventative Maint / Rotational/Vibration Meter Template
Tachometer Capability	Yes
Test Equipment General Attributes
Unique Features	Automatically detects out of balance, misalignment, looseness and bearing defects Predictive analysis capabilities that accurately calculate time frame to failure Condition based monitoring analyzes bearing wear and gear degradation
IP Rating	IP68
Product Weight	1.1 LBS
Product Height	3.7 IN
Product Length	8.7 IN
Product Width	1.8 IN
Data Logging	Yes
HTS/Schedule B Number	9031.80.8085
ECCN Number	EAR99
Power Supply Voltage	Battery Powered
Country of Origin	United States