TPI 460a - Handheld Oscilloscopes

0 reviews | UPC: 637623004605 | Model: TPI 460a

Compare

20 MHz Oscilloscope, Dual Channel, True RMS DMM,Leads, Charger

20 MHz Oscilloscope, Dual Channel, True RMS DMM,Leads, Charger
20 MHz Bandwidth Capture signals from AC/DC drive motors, sensors, actuators, line and control voltages, UPS and industrial machines.
Cursor Readout Allows you to measure the width and amplitude of the signal and display it on the screen instead of trying to figure it out manually
Decibels Allows you to accurately measure sound signals
Pre and Post Triggering View the waveform before and after the point the scope triggers at to find glitches and other anomalies with the signal
Trend Mode Graph readings over a predetermined time period to check for surges or dropouts
Dual Input View two waveforms on the display for comparison and troubleshooting
True RMS DMM Measure AC/DC volts up to 600V, frequency to 20 MHz, and resistance to 20 Meg ohm. True RMS allows you to obtain accurate measurements of non-sinusoidal AC voltage and current waveforms found in controls and circuits
Real Time Sample Rate Capture spikes and dropouts of industrial signals with real time sampling of 25 megasamples per second
Bright LCD Backlight Adjust brightness levels for clarity under any light condition
Optically Isolated RS232 Output Transfer data safely without a direct connection to your computer's circuitry
Continuous Autoset Feature automatically determines the correct vertical and horizontal settings for optimum waveform viewing. Autoset provides hands free operation while moving between test points

View Product Details

List Price: $995.00

In Stock:

Recommended for you

Choose a Category

(24)

In Stock!

Add to Cart

(5)

In Stock!

Add to Cart

Technicians appreciate the bright backlight of the 3" x 3" cold cathode flourescent display and rugged construction inside and out.

Applications

Industrial motor control View start-up in rush currents, waveform symmetry, SCR trigger pulses, variable frequency drive signals, pulse width modulation, noise, misc. AC/DC speed control signals.
Power quality Noise on industrial feeds, AC voltage waveshape, current waveforms, machine start-up/power quality interference and noise.
Programmable logic controls PLC input and output signals, control signals, signal conditioning circuits, communications lines and power supplies.
NC machines Power quality, sensor outputs, control circuits, safety circuits, calibration and adjustments.
Uninterruptable power supplies Sensing and monitoring circuits, switching circuits, output waveforms and current waveforms.
Audio Public address feeds, amplifiers, mixers and preamps.
Video Horizontal and vertical scan rates, z-axis blanking, sync pulses and luminance.
Industrial lighting controls SCR and other solid state designs.
Factory automation Robot control signals, machine vision, machine control and sensing circuits, calibration of positioning systems, analog controllers and servo controls.
Line conditioners Noise and quality.
Voltage regulators Noise and stability.
Inverters Waveform quality

General Specifications
Vertical
Bandwidth	20 MHz w/SP60B 10:1 Probe 10 MHz w/Shielded Test Leads
Sample Rate Real Time Equivalent Time	25 Megasamples per Second up to 2 MHz 500 Megasamples per Second > 2 MHz
Sensitivity	50mV TO 200V/div 1,2,5 Sequence
Coupling	AC, DC, GND
Resolution	8 bits
Accuracy	± (3% + 0.05 range/div)
Horizontal
Modes	Single, Normal, Auto
Samples per Division	25
Accuracy	Equivalent Time: ± (0.5% + 0.08 time/div) Real Time: ± (0.1% + 0.04 time/div)
Trigger
Source	Internal
Modes	Free Run, Normal
Sensitivity	Equivalent Time: 3 divisions or more Real Time: 2 divisions or more
Trend Mode
Plot time	30 sec/div to 1 hour/div
Plot Data Type	Max/Min Selectable
Memory	2 Screens
TRUE RMS DMM
DCV (CH1, CH2)	600V Basic Accuracy: 400mV, 4, 40, 400, ± (0.5% + 5 digits)
ACV (CH1, CH2)	600V Basic Accuracy: 400mV, 4, 40, 400, ± ± (1% + 10 digits)
Frequency (CH1, CH2) Basic Accuracy:	1 Hz to 20 MHz ± (0.5% + 5 digits)
Ohm (CH1 only) Basic Accuracy:	400, 4k, 40k, 400k, 4M, 20M ± (0.5% + 5 digits)
Continuity (CH1 only)	Sounds < 0.1k ohm, ± (2% + 5 digits)