Kit Contents:

• (x1) Sticklers 1.25mm CleanClicker push-to-clean tool with 750 cleanings for 15+ connector types. (PN: MCC-CCU125)
• (x1) Sticklers 2.5 mm CleanClickers push-to-clean tool with 750 cleanings 15+ connector types. (PN: MCC-CCU250)
• (x2) Fiber Optic Splice & Connector Cleaning Fluid (PN: MCC-POC03M)
• (x90) Optical Grade Clean Wipes (PN: MCC-WFW)
• (x50) CleanStixx - 1.25mm (PN: MCC-S12)
• (x50) CleanStixx - 2.5mm (PN: MCC-S25)
• (x1) Pelican 1550 hard-sided polyethylene watertight, the airtight case with custom foam insert & lid organizer for storing paperwork, tools, patch cords, ferrules, and more. 20.7” X 17.2” x 8.4”. Meets Mil-STD-810F Crush Test and IP67 Water-tightness Test.

Complete Field Inspection and Clean Kit for inspecting and cleaning fiber splices and FC, SC, and LC duplex connectors.

The Field Inspection and Clean Kit contains no hazardous materials and can be shipped anywhere in the world by ground, air, or sea without restrictions.

This is the flagship fiber optic cleaning kit from Sticklers because it includes all the best cleaning tools plus a premium fiber optic inspection probe from Viavi, the world leader in fiber optic test, measurement, and inspection.

1.25mm CleanClicker 750 click-to-clean tool delivers speedy cleaning with a single click.

• Use this click-to-clean tool on LC/UPC, LC/APC, MU/UPC, MU/APC connectors
• Also works on some hardened 1.25 mm connectors
• Use on outside plant and premise networks
• Cleans most ferrule stub and lens-based SPF+ transceivers, both in and out of adapters

With just one click the 2.5mm CleanClicker from Sticklers gets connectors clean.

• Cleans SC/UPC, SC/APC, ST, FC/APC, FC/UPC, E2000/UPC and E2000/APC connectors
• Also cleans some hardened 2.5 mm connectors
• Use to clean OptiTap connectors

This Stickler’s fiber optic splice and connector cleaner is a better, safer IPA replacement.

• Excellent IPA (Isopropyl Alcohol) alternative
• Cleaning fiber optic end-faces
• Use on Ceramic and composite ferrule faces
• Cleaning fiber during fusion splicing
• Cleans glass and plastic lenses

• Sticklers CleanWipes 90 Benchtop Wipes are in a convenient dispenser tub.
• Use on bare fiber before splicing
• Clean fiber optic jumpers and end faces
• Ideal for wet/dry cleaning using the Sticklers™ Fiber Optic Splice & Connector Cleaner Fluid 

The Sticklers CleanStixx 1.25mm fiber optic swabs are reliable, inexpensive cleaning tools.

• Use the 1.25mm fiber optic swabs to clean 1.25 mm ports
• Clean LC, MU, ARINC 801 socket termini, ODC-style socket termini, most SPF+ transceiver modules with ferrule stub and lenses interfaces, and other hardened 1.25mm connector systems within adapter and socket termini

2.5mm CleanStixx Fiber Optic Swabs get any fiber network running faster and more reliably.

• Work great on SC, ST, FC, E2000, OptiTap-style ports, MIL DTL 83526 TFOCA style socket termini
• Cleans other 2.5mm hardened connector systems
• Use on fiber optic end faces in ports, mating sleeves, or sockets of high-speed fiber-optic networks

Back reflectance, frequency loss, and scratched or pitted end-face surfaces are common when end-faces are not cleaned before starting up.

• Dust on the sleeve pushes into the contact zone of the mated connector pair
• The mating force between the two ferrules is ~15,000psi in the contact zone
• The dust breaks apart, grinds into the ceramic and glass causing scratches and pits on both end-faces
• Oil-based contamination or residue from skin oils and dust caps causes back reflectance

Don’t be that technician who speeds by a cleaning step then has to spend more money and time going back to the job right. Clean and inspect the ferrule end-faces, male and female, during installation to achieve the clean and reliable network you desire. Keep a Sticklers Fiber Optic Cleaning Kit read and wait for your next network startup.