Kit Contents:

• (x2) Sticklers 1.25mm CleanClicker push-to-clean tool with 750 cleanings for 15+ connector types. (PN: MCC-CCU125)
• (x2) Fiber Optic Splice & Connector Cleaning Fluid (PN: MCC-POC03M)
• (x90) Optical Grade Clean Wipes (PN: MCC-WFW)
• (x100) CleanStixx - 2.5mm (PN: MCC-S25)
• (x1) Pelican 1550 hard-sided polyethylene Watertight, Airtight Case with custom foam insert & lid organizer for storing paperwork, tools, patch cords, ferrules, and more. 20.7” X 17.2” x 8.4”.

This FTTA (fiber-to-the-antenna) fiber optic cleaning kit includes all the best cleaning supplies plus a premium handheld fiber optic inspection probe from Viavi, the world leader in fiber optic test, measurement, and inspection. In less than ten seconds you can ensure you did the job right the first time.

1.25mm CleanClicker 750 click-to-clean tool delivers speedy cleaning with a single click.

• Use this click-to-clean tool on LC/UPC, LC/APC, MU/UPC, MU/APC connectors
• Also works on some hardened 1.25 mm connectors
• Use on outside plant and premise networks
• Cleans most ferrule stub and lens-based SPF+ transceivers, both in and out of adapters

This Stickler’s fiber optic splice and connector cleaner is a better, safer IPA replacement.

• Excellent IPA (Isopropyl Alcohol) alternative
• Cleaning fiber optic end-faces
• Use on Ceramic and composite ferrule faces
• Cleaning fiber during fusion splicing
• Cleans glass and plastic lenses

Sticklers CleanWipes 90 Benchtop Wipes are in a convenient dispenser tub.

• Use on bare fiber before splicing
• Clean fiber optic jumpers and end faces
• Ideal for wet/dry cleaning using the Sticklers™ Fiber Optic Splice & Connector Cleaner Fluid

2.5mm CleanStixx Fiber Optic Swabs get any fiber network running faster and more reliably

• Work great on SC, ST, FC, E2000, OptiTap-style ports, MIL DTL 83526 TFOCA style socket termini
• Cleans other 2.5mm hardened connector systems
• Use on fiber optic end faces in ports, mating sleeves, or sockets of high-speed fiber-optic networks

Back reflectance, frequency loss, and scratched or pitted end-face surfaces are common when end-faces are not cleaned before starting up.

• Dust on the sleeve pushes into the contact zone of the mated connector pair
• The mating force between the two ferrules is ~15,000psi in the contact zone
• The dust breaks apart, grinds into the ceramic and glass causing scratches and pits on both end-faces
• Oil-based contamination or residue from skin oils and dust caps causes back reflectance

Don’t be that technician who speeds by a cleaning step then has to spend more money and time going back to the job right. Clean and inspect the ferrule end-faces, male and female, during installation to achieve the clean and reliable network you desire. Keep a Sticklers Fiber Optic Cleaning Kit read and wait for your next network startup.