Kit Contents:

• (x1) Sticklers 1.25mm CleanClicker push-to-clean tool with 750 cleanings for 15+ connector types. (PN: MCC-CCU125)
• (x1) MPO CleanClicker 600 (PN: MCC-CCMPO)
• (x2) Fiber Optic Splice & Connector Cleaning Fluid (PN: MCC-POC03M)
• (x1) Cassette CleanClicker (PN: MCC-WRC)
• (x90) Optical Grade Clean Wipes (PN: MCC-WFW)
• (x100) CleanStixx - 1.25mm (PN: MCC-S12)
• (x1) Pelican 1550 high-density polyethylene Watertight Case with custom foam insert & lid organizer for storing paperwork, tools, patch cords, ferrules, and more. 20.7” X 17.2” x 8.4”. 

The Sticklers CleanKit has everything needed for inspecting and cleaning splices and LC duplex and MPO connectors.

The Sticklers CleanKit contains no hazardous materials and can be shipped anywhere in the world by ground, air, or sea without restrictions

Meets Mil-STD-810F Crush Test and IP67 Water-tightness Test.

1.25mm CleanClicker 750 click-to-clean tool delivers speedy cleaning with a single click.

• Use this click-to-clean tool on LC/UPC, LC/APC, MU/UPC, MU/APC connectors
• Also works on some hardened 1.25 mm connectors
• Use on outside plant and premise networks
• Cleans most ferrule stub and lens-based SPF+ transceivers, both in and out of adapters

The keyless CleanClicker 600 MPO connector cleaner allows up or down cleaning.

• Ideal for high-density network applications such as in data centers, telco central offices, and cable TV headends
• Cleans all compliant IEC 61754-7 and TIA604-5 FOCIS 5 MT-based connector systems
• Works on most brands of multi-fiber connectors
• Use on flat polished multimode connectors and angled single-mode connectors
• Cleans adapters and truck assemblies

This Stickler’s fiber optic splice and connector cleaner is a better, safer IPA replacement.

• Excellent IPA (Isopropyl Alcohol) alternative
• Cleaning fiber optic end-faces
• Use on Ceramic and composite ferrule faces
• Cleaning fiber during fusion splicing
• Cleans glass and plastic lenses

CleanClicker Cassette Cleaners remove contaminants without scratching end faces.

• Use to clean SC, LC duplex, ST, FC, E2000, and female (no guide pins) MPO cable assemblies
• Use the CleanClicker Cassette Cleaner on glass, ceramic, and composite ferrule faces
• Clean male (with guide pins) MT ferrules
• Ideal for OSP and premises applications, enterprise applications, field installations, OEM assembly, and research labs

Sticklers CleanWipes 90 Benchtop Wipes are in a convenient dispenser tub.

• Use on bare fiber before splicing
• Clean fiber optic jumpers and end faces
• Ideal for wet/dry cleaning using the Sticklers™ Fiber Optic Splice & Connector Cleaner Fluid

The Sticklers™ CleanStixx 1.25mm fiber optic swabs are reliable, inexpensive cleaning tools.

• Use the 1.25mm fiber optic swabs to clean 1.25 mm ports
• Clean LC, MU, ARINC 801 socket termini, ODC-style socket termini, most SPF+ transceiver modules with ferrule stub and lenses interfaces, and other hardened 1.25mm connector systems within adapter and socket termini

Back reflectance, frequency loss, and scratched or pitted end-face surfaces are common when end-faces are not cleaned before startup.

• Dust on the sleeve pushes into the contact zone of the mated connector pair
• The mating force between the two ferrules is ~15,000psi in the contact zone
• The dust breaks apart, grinds into the ceramic and glass causing scratches and pits on both end-faces
• Oil-based contamination or residue from skin oils and dust caps causes back reflectance

Don’t be that technician who speeds by a cleaning step then has to spend more money and time going back to the job right. Clean and inspect the ferrule end-faces, male and female, during installation to achieve the clean and reliable network you desire. Keep a Sticklers Fiber Optic Cleaning Kit read and wait for your next network startup.