| Paramenter |
Specification |
| COPPER TESTING |
| Certification testing |
TIA 568-C.2 CAT 5e, 6, 6A, draft CAT 8 ISO/IEC 11801, EN 50173 Class D, E, EA, F, FA Draft Class I and Class II Permanent link and channel CAT 5e, 6, 6A, 7, 7A and patch-cord |
| Max cable length for dual-ended Autotest |
500m |
| Insertion cycles Channel: |
10,000 typical Permanent link: 5,000 typical |
| TEST PARAMETERS |
As specified in TIA 1152, IEC 61935-1 |
| Wiremap |
| Loop Resistance |
0 to 40 Ω, ±0.1 Ω |
| Length |
0 to 500m, ±0.5m (dual-ended testing) |
| Propagation Delay and Delay Skew |
0 to 5000 ns, ±1 ns |
| Attenuation |
0 to 70 dB, ±0.1dB |
| Pair-to-Pair and Power-Sum NEXT |
0 to 85 dB, ±0.2 dB |
| Pair-to-Pair and Power-Sum ACRF |
0 to 85 dB, ±0.2 dB |
| Return Loss |
0 to 40 dB, ±0.2 dB |
| ACRN, PSACRN |
0 to 85 dB, ±0.5 dB |
| Advanced diagnostics |
Time-domain fault Locator for RL and NEXT |
| Measurement accuracy |
Exceeds TIA 1152 Level IIIe, IEC 61935 level IV, draft level V |
| Measurement frequency range |
1- 2,500 MHz |
| FIBER TESTING - SM |
| Wavelengths |
1310nm, 1550nm |
| Autotest time |
6 seconds for dual ended test |
| Connector type |
SC, LC (optional adapter needed) |
| Test standard |
TIA 568 C.3, IEC 14763-3 |
| Loss |
0 to 31 dB, ±0.2 dB |
| Length |
0 to 20,000m, ±1.5m |
| Output power |
-5 dBm to -9dBm |
| Receiver sensitivity |
-40dBm |
| FIBER TESTING - MM / MMEF |
| Wavelengths |
850nm, 1300nm |
| Autotest time |
6 seconds for dual ended test |
| Connector type |
SC / FC-SC |
| Test standard |
TIA 568 C.3, IEC 14763-3 |
| TEST PARAMETERS |
| Loss |
0 to 24 dB, ±0.2 dB |
| Length |
0 to 2,000m, ±1.5m |
| Dynamic range |
24 dB / 12dB |
| Output power |
-4 dBm to -10 dBm / -16 dBm to -20 dBm |
| Receiver sensitivity |
-34 dBm / -40 dB |
| Encircled-Flux (EF) compliance |
IEC 61280-4-1 (MMEF) |
| VFL wavelength |
650 µm (MMEF) |
| Power |
0 dBm (MMEF) |
| GENERAL SPECIFICATIONS |
| Interfaces |
Probe Interface, RJ-45 Ethernet, USB host and device, talkset, power jack |
| Display |
5" industrial LCD, touch sensitive area on both units |
| Enclosure |
Ruggedized plastic with rubber over-mold, withstands 1.5m drop test on hard surface |
| Remote unit abilities |
View test results, save tests, start autotest |
| Power supply |
AC 100-240V to 12V, 3A power adapter |
| Input over-voltage protection |
Protected against Telco voltages |
| Battery |
Removable and rechargeable Li-Ion |
| Battery capacity |
>8 hours continuous operation |
| Internal storage capacity |
2000 copper test results with full plot information |
| External storage |
USB Flash Drive |
| Dimensions |
32 X 126 X 87 mm (8.7 X 4.3 X 2.1 inch) |
| Weight Approx. |
1.4 kg (3 lb) / unit |
| Supported languages |
tw, cs, en, fi, fr, de, it, ja, ko, pl, pt, ru, es, sv, tr |
| Calibration period |
1 year |
| ENVIRONMENTAL |
| Operating temperature |
0 to 40 °C |
| Storage temperature |
-20 to 60 °C |
| Relative humidity |
10% to 80% |
| MINIMUM SYSTEM REQUIREMENTS FOR REPORTING SOFTWARE |
Microsoft Windows XP/7/8, 32 or 64 bits
Intel Core 2 Duo, 2GHz
200MB of free disk space
1GB RAM
Microsoft.NET Framework 4.0 |