INPUT |
Voltage |
100-120 VAC / 200-240 VAC ± 10% Auto Range |
Frequency |
50/60 Hz ± 5% |
Fuse |
3.15 A / 250 VAC Fast-Blow |
DIELECTRIC WITHSTAND TEST MODE |
Output Rating |
AC 0-5.00 kVAC, 12.00 mA
DC 0-6.00 kVDC, 5.00 mA |
Voltage Setting
|
0-5.00 kVAC
Resolution: 0.01 kV
Accuracy: ± (1.5% of setting + 5V)
0-6.00 kVDC
Resolution: 0.01 kV
Accuracy: ± (1.5% of setting + 5V) |
Output Frequency
|
DC and 50/60 Hz Selectable |
Accuracy: ± 0.1% |
AC Waveform |
Sine Wave, Crest Factor = 1.3 - 1.5 |
DC Output Ripple |
<5% ( 6 kVDC / 5mA at Resistive Load) |
Dwell Timer |
0, 0.2 - 60 sec, (0=continuous), 0.1 sec/step |
Ramp Timer |
0.2 - 180 sec, 0.1 sec/step |
Leakage Failure Settings
|
AC Hi-Limit: 0.10 - 12.00 mA
Lo-Limit: 0 - 12.00 mA
DC Hi-Limit: 0.02 - 5.00 mA
Lo-Limit: 0 - 5.00 mA |
Resolution:
Accuracy: |
0.01 mA
± (2% of reading + 0.02 mA) |
Discharge Time |
< 50 msec for no load, < 100 msec for capacitive load |
GENERAL SPECIFICATIONS |
Continuity Feature
|
Range:
Resolution:
Accuracy: |
0.0 - 1.50 Ω
0.01 Ω
± (2% of setting + 0.02 Ω) |
Memories |
5 (10 optional) |
Remote I/O
|
Input:
Output:
|
Test, Reset, Interlock
-Pass, Fail, Test-in-Process
Hardware Interlock - a relay on the high voltage output opens when the Interlock signal is disabled. |
3mA AC/DC Current Limit (optional) |
Range: 0.00 - 3.00 mA
Resolution: 0.01 mA
Accuracy: ± (2% of setting + 0.02mA) |
Meter Max (standard) |
Displays the maximum voltage value recorded during a breakdown. |
Imax (optional) |
Displays the maximum leakage current value read during a test. Option 3 (USB port) must be installed to receive this measurement. |
Security
|
Option to turn On or Off, when On you can switch between two security levels:
1. Run - Operator can only run a test. No ability to change memory locations or edit test parameters.
2. Mem - Operator can run a test and change memory locations. No ability to edit test parameters. |
Safety Mark |
CE/cTUVus |
Dimensions
(W x H x D) |
8.5" x 3.5" x 11.9" (215 x 88.1 x 300 mm) |
Weight |
12 lbs (5.46 Kg) |