Simpson H335 Series Hawk 3 Digital Panel Meter/Controller

3.5,120V,20MADC,0-10V,4R

Five user-selectable brightness levels
4-20mA or 0-10 DCV analog retransmission optional
1/8 DIN, shallow depth case, (only 3.24" behind panel)
Activated set point indicators on display
12 or 24 DCV Excitation output optional, maximum 30mA @ 12V and 20mA @ 24V

H335 Series Hawk 3 Digital Panel Meter/Controller

The Simpson Electric Hawk 3 Advanced Digital Panel Meter/Controller has both 3-1/2 and 4-1/2 digit displays. All LEDs are 7 segment and offer 5 brightness levels.

This high quality instrument has user-programmable parameters, all set from the front panel in easy to understand terminology. The display shows activated set point indicators (up to four). The keypad buttons have both audible and tactile feedback to prevent keystroke errors.

Installation and Panel Cutout - H335, H340, H345
Mounting Requirements

The Hawk 3 Advanced Digital Controller 1/8 DIN meters require a panel cutout of 1.77" (45mm) high by 3.62" (92mm) wide.

To install the Hawk 3 meter into a panel cutout, remove the clips from the side of the meter.

Slide the meter through the panel cutout, then slide the mounting clips back on the meter. Press evenly to ensure a proper fit. Tighten screws.

Engineering Label Placement

To replace the engineering unit label, place the tip of a ballpoint pen into the small hole at the base of the engineering label in the bezel.

Slide the label up until it pops out. Grasp and remove. Slide the new label half the distance in, then use the ballpoint pen to slide it down into place.

General Specifications
Display
Type	7- segment, red LED, 4 or 5 digits
Height	0.56" (14.2mm)
Brightness	5 settings, user programmable
Decimal Point	4 or 5 position, user programmable
Overrange Indication	Display flashes "EEEE" indicating Maximum Value Exceeded (Example: H335)
Underrange Indication	Display flashes "-EEE" indicating Minimum Value Exceeded (Example: H335)
Alarm Indicators	4 LED indicators for up to four independent setpoints
Linearization	H335 has a 2 points H345 has a 16 points
Power Requirements
AC	85 to 250 VAC or 120VAC @ 10VA
DC	9 to 36 DCV @ 10VA
Isolation	250V RMS MAX
Note: Each supply is shown at the maximum and minimum values except the 120 VAC unit, which is allowed ± 10%
ACCURACY @ 25°C as % of rdg
	4-1/2 digit	3-1/2 digit
DC Current
High (5A, 2A)	± 0.2% of reading ± 1 count	± 0.3% of reading ± 1 count
All others	± 0.05% of reading ± 1 count	± 0.1% of reading ± 1 count
DC Volts
High (600V)	± 0.1% of reading ± 1 count	± 0.2% of reading ± 1 count
All others	± 0.05% of reading ± 1 count	± 0.1% of reading ± 1 count
Resistance
All ranges	± 0.1% of reading ± 2 counts	± 0.1% of reading ± 2 counts
* AC Current
High (2A, 5A)	± 0.2% of reading ± 2 counts	± 0.3% of reading ± 2 counts
All others	± 0.1% of reading ± 2 counts	± 0.2% of reading ± 2 counts
* AC Volts
High (600V)	± 0.1% of reading ± 1 counts	± 0.2% of reading ± 2 counts
All others	± 0.5% of reading ± 1 counts	± 0.1% of reading ± 1 counts
* AC functions measured at 50 hz, include ± 1 count for each additional 100 Hz above 50 Hz
Environmental
Operating Temperature	0 to 50ºC
Storage Temperature	-10 to +60°C
Relative Humidity	< 80% for the temp. up to 31ºC and decreasing linearly to 50% relative humidity at 50°C
Ambient Temp	25°C
Temperature Drift	± 100 ppm /°C
Warmup time	10 minutes
Noise Rejection
NMRR	60 dB @ 50-60 Hz
CMRR	70 db @ 50-60 Hz
Note: For indoor use to an altitude up to 200m
Analog to Digital Conversion
Technique	Successive approximation with oversampling
Sample Rate	10 conversions per second
Display Rate	User Programmable from 1 - 420 updates / minute (240 default)

Tech Specs

Temperature / PID Controllers
Size Rectangular	1/8 DIN
Panel Meters/Panel Meters Template
Type (Panel Meter )	Digital
Style (Panel Meter)	Rectangular/Square
Number of Inputs (Panel Meters)	Single
Mounting (Panel Meter)	Panel Mount
Input (Panel Meters)	Current
Size-Face Width	Other
Process Output	No
Control / Alarm Setpoints	Yes
Water Proof	No
Splash Proof	No
Relay Output	Yes
Test Equipment General Attributes
Country of Origin	United States

0

Name: Simpson H335123240 Panel Meter
Brand: Simpson
SKU: SimpsonH335123240
Price: 483.76 USD
Availability: InStock

Out of 5

Average Customer Review

Share your thoughts with other customers

Write a Review



Product	Simpson H335123240 3.5,120V,20MADC,0-10V,4R	Simpson F451110 4-1/2, 120VAC, 200MVDC	Simpson F451111 4-1/2, 120VAC, 200MVDC, 12V	Simpson F451120 4-1/2, 120VAC, 2VDC	Simpson F451130 4-1/2, 120VAC, 20VDC	Simpson F451131 4-1/2, 120VAC, 20VDC, 12VDC	Simpson F451132 4-1/2, 120VAC, 20VDC, 24VDC	Simpson F451140 4-1/2, 120VAC, 200VDC	Simpson F451210 4-1/2, 120VAC, 200UADC	Simpson F451220 4-1/2, 120VAC, 2MADC	Simpson F451230 4-1/2, 120VAC, 20MADC	Simpson F451232 4-1/2, 120VAC, 20MADC, 24V	Simpson F451240 4-1/2, 120VAC, 200MADC	Simpson F451250 4-1/2, 120VAC, 2ADC	Simpson F451251 4-1/2, 120VAC, 2ADC, 12VDC	Simpson F451260 4-1/2, 120VAC, 5ADC	Simpson F451310 4-1/2, 120VAC, 200MVAC	Simpson F451320 4-1/2, 120VAC, 2VAC	Simpson F451330 4-1/2, 120VAC, 20VAC	Simpson F451410 4-1/2, 120 VAC, 200UAAC	Simpson F451420 4-1/2, 120 VAC, 2 MA AC	Simpson F451430 4-1/2, 120VAC,20MAAC	Simpson F451440 4-1/2, 120VAC, 200MAAC	Simpson F451450 4-1/2, 120VAC, 2AAC	Simpson F451460 4-1/2, 120VAC, 5AAC	Simpson F451610 4-1/2, 120VAC, 200UAAC	Simpson F451620 4-1/2, 120VAC, 2MAAC	Simpson F451630 4-1/2, 120VAC, 20MARMS	Simpson F451640 4-1/2, 120VAC, 200MARMS	Simpson F451650 4-1/2, 120VAC, 2ARMS	Simpson F451660 4-1/2, 120VAC, 5ARMS	Simpson F451710 4-1/2, 120VAC, 4-20MADC	Simpson F451711 4-1/2, 120VAC, 4-20MADC, 12V	Simpson F451712 4-1/2, 120VAC, 4-20MADC, 24V	Simpson F451720 4-1/2, 120VAC, 1-5 VDC	Simpson F451722 4-1/2, 120AC, 1-5VDC, 24V	Simpson F451730 4-1/2, 120VAC, 0-10VDC	Simpson F451731 4-1/2, 120VAC, 0-10VDC, 12VDC EXCI	Simpson F451732 4-1/2, 120VAC, 0-10VDC, 24VDC EXCI	Simpson F451800C 4-1/2, 120VAC, J T/C, C	Simpson F453711 4-1/2, 9-32VDC, 4-20MADC, 12VDC
Price
In Stock
Size Rectangular	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN	1/8 DIN
Compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare

How Can We Help You?

Questions?

Log in to Your Account

Not a member yet? It's FREE!

Top Categories

Simpson H335123240 Panel Meter

Items in This Series

Recommended for you

Simpson H335 Series Hawk 3 Digital Panel Meter/Controller

3.5,120V,20MADC,0-10V,4R

H335 Series Hawk 3 Digital Panel Meter/Controller

Installation and Panel Cutout - H335, H340, H345 Mounting Requirements

Engineering Label Placement

Tech Specs

Temperature / PID Controllers

Panel Meters/Panel Meters Template

Test Equipment General Attributes

0

Featured Review

We'd love to hear from you

Real people, here to help you.

Get Connected

My Account

Promotions & Offers

Resources

Company

Installation and Panel Cutout - H335, H340, H345
Mounting Requirements