Simpson H335115021 Panel Meter

Name: Simpson H335115021 Panel Meter
Brand: Simpson
SKU: SimpsonH335115021
Price: 403.19 USD
Availability: InStock

0 reviews | Catalog: H335115021 | Model: Simpson H335115021

Simpson H335 Series Hawk 3 Digital Panel Meter/Controller

Compare

3.5,120V,600VDC,2R,12V

3.5,120V,600VDC,2R,12V
Five user-selectable brightness levels
Screw terminals for easy installation
Screw terminals for easy installation
NEMA 4X rated front panel
7 segment 4-1/2 or 3-1/2 red LED with five brightness display levels
All parameters set from easy to understand front panel access
16 point scaling linearization
One, two or four 5-amp relays optional
1/8 DIN, shallow depth case, (only 3.24" behind panel)
Activated set point indicators on display
12 or 24 DCV Excitation output optional, maximum 30mA @ 12V and 20mA @ 24V
4-20mA or 0-10 DCV analog retransmission optional

View Product Details

List Price: $537.59

Your Price: $403.19

Sign-in for EDU Pricing!

In Stock:

View Payment Options

Request Quote

Recommended for you

Simpson H335115021 - Hawk 3 Digital Panel Meter/Controller, 3.5, 120V, 600VDC, 2R, 12V

Five user-selectable brightness levels
Activated set point indicators on display
16 point scaling linearization
Peak/Valley and password lockout

The Simpson Electric Hawk 3 Advanced Digital Panel Meter/Controller has both 3-1/2 and 4-1/2 digit displays. All LEDs are 7 segment and offer 5 brightness levels.

This high quality instrument has user-programmable parameters, all set from the front panel in easy to understand terminology. The display shows activated set point indicators (up to four). The keypad buttons have both audible and tactile feedback to prevent keystroke errors.

Installation and Panel Cutout - H335, H340, H345

Mounting Requirements

The Hawk 3 Advanced Digital Controller 1/8 DIN meters require a panel cutout of 1.77" (45mm) high by 3.62" (92mm) wide.

To install the Hawk 3 meter into a panel cutout, remove the clips from the side of the meter.

Slide the meter through the panel cutout, then slide the mounting clips back on the meter. Press evenly to ensure a proper fit. Tighten screws.

Engineering Label Placement

To replace the engineering unit label, place the tip of a ballpoint pen into the small hole at the base of the engineering label in the bezel.

Slide the label up until it pops out. Grasp and remove. Slide the new label half the distance in, then use the ballpoint pen to slide it down into place.

General Specifications
Display
Type	7- segment, red LED, 4 or 5 digits
Height	0.56" (14.2mm)
Brightness	5 settings, user programmable
Decimal Point	4 or 5 position, user programmable
Overrange Indication	Display flashes "EEEE" indicating Maximum Value Exceeded (Example: H335)
Underrange Indication	Display flashes "-EEE" indicating Minimum Value Exceeded (Example: H335)
Alarm Indicators	4 LED indicators for up to four independent setpoints
Linearization	H335 has a 2 points H345 has a 16 points
Power Requirements
AC	85 to 250 VAC or 120VAC @ 10VA
DC	9 to 36 DCV @ 10VA
Isolation	250V RMS MAX
Note: Each supply is shown at the maximum and minimum values except the 120 VAC unit, which is allowed ± 10%
ACCURACY @ 25°C as % of rdg
	4-1/2 digit	3-1/2 digit
DC Current
High (5A, 2A)	± 0.2% of reading ± 1 count	± 0.3% of reading ± 1 count
All others	± 0.05% of reading ± 1 count	± 0.1% of reading ± 1 count
DC Volts
High (600V)	± 0.1% of reading ± 1 count	± 0.2% of reading ± 1 count
All others	± 0.05% of reading ± 1 count	± 0.1% of reading ± 1 count
Resistance
All ranges	± 0.1% of reading ± 2 counts	± 0.1% of reading ± 2 counts
* AC Current
High (2A, 5A)	± 0.2% of reading ± 2 counts	± 0.3% of reading ± 2 counts
All others	± 0.1% of reading ± 2 counts	± 0.2% of reading ± 2 counts
* AC Volts
High (600V)	± 0.1% of reading ± 1 counts	± 0.2% of reading ± 2 counts
All others	± 0.5% of reading ± 1 counts	± 0.1% of reading ± 1 counts
* AC functions measured at 50 hz, include ± 1 count for each additional 100 Hz above 50 Hz
Environmental
Operating Temperature	0 to 50ºC
Storage Temperature	-10 to +60°C
Relative Humidity	< 80% for the temp. up to 31ºC and decreasing linearly to 50% relative humidity at 50°C
Ambient Temp	25°C
Temperature Drift	± 100 ppm /°C
Warmup time	10 minutes
Noise Rejection
NMRR	60 dB @ 50-60 Hz
CMRR	70 db @ 50-60 Hz
Note: For indoor use to an altitude up to 200m
Analog to Digital Conversion
Technique	Successive approximation with oversampling
Sample Rate	10 conversions per second
Display Rate	User Programmable from 1 - 420 updates / minute (240 default)

Tech Specs

Temperature / PID Controllers
Size Rectangular	1/8 DIN
Panel Meters/Panel Meters Template
Type (Panel Meter )	Digital
Style (Panel Meter)	Rectangular/Square
Number of Inputs (Panel Meters)	Single
Mounting (Panel Meter)	Panel Mount
Input (Panel Meters)	Voltage
Size-Face Width	Other
Process Output	No
Control / Alarm Setpoints	Yes
Water Proof	No
Splash Proof	No
Relay Output	Yes
Test Equipment General Attributes
Country of Origin	United States