Simpson G1001110 Three Phase Digital Panel Meter

• G100-110VAC ,120/208 VOLT, 5 AMP
• Four model types designed to fit a wide range of applications
• Easy installation - software detection/correction of wiring errors
• Wide backlit LCD display for easy viewing
• Easy to use - four keys select all parameters
• Use for single or three-phase applications
• Not for use with grounded delta applications
• Modbus communication option available

Mounting Requirements

• Panels should be .04 to .16 inches (1mm to 4mm) thick with a square cut-out of 3.62” x 3.62” (92mm x 92mm.)
• A minimum depth of 2.83” (72mm) should be allowed behind the panel for the meter.
• Remove the panel mounting clips and insert the meter into the cutout from the front of the panel.
• Push the meter home.
• Ensure the screws in each panel mount clip are fully retracted and insert the clips as shown in the diagram below.
• Tighten the screws to secure the meter firmly in the panel. Do not overtighten.