• Frequency range: 9 kHz - 13.6 GHz (upgradable to 20 GHz with option SSG5080A-F85)
• 0.001 Hz frequency setting resolution
• Level setting range: -130 dBm ~ 25 dBm (with option SSG5080A-LP)
• Phase Noise: -120 dBc / Hz @ 1 GHz, 20 kHz offset (typ.)
• Includes OCXO reference hardware module for high-precision and high stability signal output

The Siglent SSG5000A microwave signal generator supports AM/FM/PM modulation, and pulse modulation (option) and features a pulse train generator (option), power meter control, and much more. It also includes an OCXO reference hardware module to ensure high precision, and high stability signal output. Applications include communications, aerospace, national defense, R&D, and many other fields.

With this option, the SSG5000A is able to modulate an RF carrier signal with a pulse signal as the modulation signal.

The chart below provides an overview of simultaneous modulation capabilities with the SSG5000A.

●=compatible, ×=incompatible, (●) =compatible limitations; NO specification Applies to AM

distortion.

The SSG5000A series features an optional pulse train generator which can deliver up to 2047 pulses per trigger.

• Number of pulses: 1 - 2047
• Number of repetitions per pulse: 1 - 65535
• Pulse on time and off time setting range: 20 ns - 300 s
• Pulse on time and off time setting resolution: 10 ns

The SSG5000A can also be equipped with an optional 100 dB step attenuator, ranging from 0 to 110 dB in 10dB steps. Please note this is a factory-installed option.

Please see pages 7-8 of this document for detailed performance characteristics.

1.Function key                                                                   6.Direction key

2.USB host                                                                          7.Digital keyboard

3.LF output                                                                         8.Touch screen

4.RF output                                                                        9.Power button

5.Knob

1.AC input                                                                                                        7.10 MHz out

2.LAN interface                                                                                              8.Pulse in/out

3.USB Host                                                                                                      9.Signal valid (outputs an impulse synchronization signal)

4.USB Device                                                                                                 10.Trigger in/out

5.External modulation input                                                                     11.Ground terminal

6.10 MHz in

7.10 MHz out

8.Pulse in/out

9.Signal valid (outputs an impulse synchronization signal)

10.Trigger in/out

11.Ground terminal