| Analog channels |
2 + EXT |
| Bandwidth |
1 GHz |
| Sample rate (Max.) |
5 GSa/s (interleaving mode*), 2.5 GSa/s (non-interleaving mode**) |
| Memory depth (Max.) |
250 Mpts/ch (interleaving mode), 125 Mpts/ch (non-interleaving mode) |
| Waveform capture rate (Max.) |
110,000 wfm/s (Normal mode); 500,000 wfm/s (Sequence mode) |
| Trigger type |
Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified, Nth edge, Setup/hold, Delay |
| Serial trigger and decode |
Standard: I2C, SPI, UART, CAN, LIN
Optional: CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester (decode only) |
| Measurement |
50+ parameters, statistics, histogram, trend supported Math: 2 traces
2 Mpts FFT, +, -, x, ÷, ∫dt, d/dt, √, Identity, Negation, Absolute, Sign, ex, 10x, ln, lg, Interpolation, etc.; supports formula editor |
| Data analysis |
Search, Navigate, History, Mask Test, Digital Voltmeter, Counter, Waveform Histogram, Bode plot and Power Analysis |
| Digital channel (optional) |
16-channel; maximum sample rate up to 1.25 GSa/s; record length up to 62.5 Mpts |
| Waveform generator (optional) |
Single channel external USB waveform generator, frequency up to 25 MHz, 125 MSa/s sample rate, 16 kpts waveform memory |
| I/O |
USB Host, USB Device, LAN, Pass/Fail, Trigger Out, 10 MHz In, 10 MHz Out, VGA Output |
| Probe (standard) |
SP3050A, 500 MHz, 1 probe supplied for each channel |
| Display |
10.1” TFT-LCD with capacitive touch screen (1024*600) |
| * Interleaving mode only one of CH1/CH2 and/or only one of CH3/CH4 activated |
| ** Non-interleaving mode both CH1/CH2 or both CH3/CH4 activated |
| Acquire System (analog channel) |
| Sample rate |
5 GSa/s (interleaving mode), 2.5 GSa/s (non-interleaving mode) |
| Memory depth |
250 Mpts (interleaving mode), 125 Mpts (non-interleaving mode) |
| Peak detect |
400 ps |
| Average |
4, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536 |
| ERES |
Enhanced bit: 0.5, 1, 1.5, 2, 2.5, 3 |
| Sequence |
Up to 100,000 segments, interval between triggers = 2 μs min |
| History |
Up to 100,000 frames |
| Interpolation |
sinx/x, x |
| Vertical System (analog channel) |
| Bandwidth (-3dB) @50 Ω |
1 GHz** |
| Rise time (typical) @50 Ω |
0.4 ns |
| Vertical range |
8 divisions |
| Vertical scale (probe 1X) |
1 MΩ: 500 μV/div – 10 V/div(setting range), 1 mV/div – 10 V/div(specified range)
50 Ω: 500 μV/div – 1 V/div(setting range), 1 mV/div – 1 V/div(specified range) |
| DC gain accuracy |
< 1.5%, ≥5mV/div
< 3.0%, <5mV/div |
| Offset accuracy |
±(1.5%*offset+1.5%*full scale+1mV) |
| Offset range (probe 1X) |
0.5mV/div~20mV/div: ±2V;
20.5mV/div~100mV/div: ±5V;
102mV/div~200mV/div: ±20V;
205mV/div~1V/div: ±50V;
1.02V/div~2V/div: ±200V
2.05V/div~10V/div: ±400V |
| Bandwidth flatness (>2 mV/div, @50 Ω) |
50 kHz ~ BW/10: ±0.5 dB
BW/10 ~ BW/3: ±0.8 dB
BW/3 ~ BW2/3: +1.0 dB, -1.2 dB
BW2/3 ~ BW: +2.0 dB, -2.5 dB |
| Bandwidth limit |
20 MHz (±40%)
200 MHz (±40%) |
| Low frequency response (AC coupling -3 dB) |
5 Hz (typical) |
| Overshoot (150 ps pulse @50 Ω) |
<15% (typical) |
| Coupling |
DC, AC, GND |
| Impedance |
DC1M: (1 MΩ±2%) || (16 pF±2 pF)
AC1M: (1.2 MΩ±2%) || (16 pF±2 pF)
50 Ω: 50 Ω±1% |
| Max. Input voltage |
50 Ω: 50 Ω±1%
1MΩ ≤ 400Vpk(DC + AC), DC~10kHz
50Ω ≤ 5Vrms, ±10V Peak |
| SFDR |
≥ 32 dBc |
| CH to CH Isolation (@50Ω) |
DC ~ 100 MHz >40 dB
100 MHz ~ BW: ≥34 dB |
| Probe Attenuation |
1X, 10X, 100X, custom |
| * Below 1 mV/div (included) the bandwidth is limited to 200 MHz |
| ** Below 2.45 mV/div (included) the bandwidth is limited to 200 MHz |
| Horizontal System |
| Time scale |
200 ps/div – 1000 s/div |
| Waveform update rate |
Up to 110,000 wfm/s |
| Intensity grading |
256-level |
| Display mode |
Y-T, X-Y, Roll |
| Roll mode |
≥ 50 ms/div |
| Skew (CH1~CH4) |
< 150 ps |
| Time base Accuracy |
±1ppm initial; ±1ppm 1st year aging; ±3.5ppm 10-year aging |