| Analog channels |
4 + EXT |
| Bandwidth |
350 MHz |
| Sample rate (Max.) |
2 GSa/s (interleaving mode, 1 GSa/s (non-interleaving mode) |
| Memory depth (Max.) |
200 Mpts/ch (interleaving mode), 100 Mpts/ch (non-interleaving mode) |
| Waveform capture rate (Max.) |
Normal mode：120,000 wfm/s;
Sequence mode：500,000 wfm/s |
| Vertical resolution |
8-bit. 10-bit mode (with typical 100 MHz bandwidth) |
| Trigger type |
Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Video and Serial |
| Serial trigger and decode |
Standard: I2C, SPI, UART, CAN, LIN
Optional: CAN FD, FlexRay, I2S, MIL-STD-1553B |
| Measurement |
More than 50 parameters, supports statistics with histogram and trend |
| Math |
2 traces
2 Mpts FFT, +, -, x, ÷, d/dt, ∫dt, √, average, ERES, and formula editor |
| Data processing and analysis tools |
Search, Navigate, History, Mask test, Bode plot, Power Analysis (optional) and Counter |
| Digital channel (optional) |
16-channel; maximum sample rate up to 500 MSa/s; record length up to 50 Mpts/ch |
| Waveform generator (optional) |
Single channel, frequency up to 50 MHz, 125 MSa/s sample rate, 16 kpts waveform memory |
| Interface |
USB 2.0 Host x2, USB 2.0 Device, LAN, External trigger, Auxiliary output (TRIG OUT, PASS/FAIL) |
| Probe (standard) |
SP2035A, 350 MHz, 1 probe supplied for each channel |
| Display |
10.1” TFT-LCD with capacitive touch screen (1024x600) |
| Acquisition System (analog channels) |
| Sample rate |
2 GSa/s (interleaving mode* 1）, 1 GSa/s (non-interleaving mode* 2 ) |
| Memory depth |
200 Mpts/ch (interleaving mode) * 3, 100 Mpts/ch (non-interleaving mode) * 3 |
| Waveform capture rate |
Normal mode: 120,000 wfm/s max.
Sequence mode: 500,000 wfm/s max. |
| Trace intensity |
256 grades |
| Peak detect |
1 ns minimum detectable pulse |
| Sequence |
90,000 frames max.; Interval between triggers = 2 μs min. |
| History |
90,000 frames max. |
| Interpolation |
Sin(x)/x, x |
| * 1：Interleaving mode: only one of CH1/CH2 and/or only one of CH3/CH4 activated |
| * 2：Non-interleaving mode: both CH1/CH2 and/or both CH3/CH4 activated |
| * 3：In 10-bit mode the maximum memory depth reduces by half |
| Vertical System |
| Analog channels |
4 + EXT |
| Bandwidth (-3dB) @ 50 Ω |
350 MHz (standard) * 2
500 MHz (optional) * 1,2 |
| Rise time (typical) @ 50 Ω |
1 ns (standard) * 2
800 ps (optional) * 1,2 |
| Resolution |
8-bit. 10-bit mode (with typical 100 MHz bandwidth) |
| Vertical range |
8 divisions |
| Vertical scale (probe 1X) |
1 MΩ: 500 μV/div - 10 V/div
50 Ω: 500 μV/div - 1 V/div |
| DC gain accuracy |
≤ 3.0% |
| Offset accuracy |
±(1.5%*offset+1.5%*full scale+1 mV) |
| Offset range (probe 1X) |
500 μV/div ~ 100 mV/div: ± 2 V
102 mV/div ~ 1 V/div: ± 20 V
1.02 V/div ~ 10 V/div: ± 200 V |
| Bandwidth flatness @ 50 Ω |
10 kHz ~ BW/10: ±0.5 dB
BW/10 ~ BW/3: ±0.8 dB
BW/3 ~ BW2/3: +1.0 dB, -1.2 dB
BW2/3 ~ BW: +2.0 dB, -2.5 dB |
| Bandwidth limit |
20 MHz (-0, +20%)
200 MHz (-0, +20%) |
| Low frequency response (AC coupling -3 dB) |
5 Hz (typical) |
| Overshoot (150ps fast edge input @50Ω) |
<12% (typical) |
| Coupling |
DC, AC, GND |
| Impedance |
(1 MΩ ±2%) || (17 pF ±2 pF)
50 Ω: 50 Ω ±1% |
| Max. Input voltage |
1 MΩ ≤400 Vpk(DC + AC), DC~10 kHz
50 Ω ≤5 Vrms, ±10 V Peak |
| SFDR |
≥40 dB |
| CH to CH Isolation @ 50Ω |
DC～100 MHz: >40 dB
100 MHz ~ BW: ≥34 dB |
| Probe Attenuation |
1X, 10X, 100X, Custom |
| * 1：In interleaving mode bandwidth is 500 MHz, rise time is 0.8 ns; in non-interleaving mode bandwidth is 350 MHz, rise time is 1 ns |
| * 2：In 10-bit mode bandwidth is 100 MHz (typical), rise time is 3.3 ns (typical) |
| Horizontal System |
| Time scale |
1 ns/div - 1000 s/div
0.5 ns/div - 1000 s/div when 500 MHz bandwidth option is installed |
| Horizontal range |
10 divisions |
| Display mode |
Y-T, X-Y, Roll (≥50 ms/div) |
| Skew (CH1~CH4) |
<100 ps |
| Time base Accuracy |
±1ppm initial; ±1ppm 1st year aging; ±3.5ppm 10-year aging |