Model |
MSO2072 |
MSO2102 |
MSO2202 |
MSO2302 |
MSO2074 |
MSO2104 |
MSO2204 |
MSO2304 |
Bandwidth |
70MHz |
100MHz |
200MHz |
300MHz |
Channels |
2/4CH + 1 EXT, 8 digital channels (optional) |
Max. Real Time Sampling Rate |
2Gsa/s |
Memory Depth |
28Mpts |
Maximum Capture Rate |
110,000wfms/s |
Input Impedance |
1MΩ||20pF, 50Ω |
Time Based Range |
1.0ns/div - 50s/div
ROLL: 100ms - 50s/div |
Vertical Sensitivity |
2mV/div - 10V/div |
Trigger Types |
Edge, Pulse, Video, Slope, Interval, Runt, Window, Pattern, DropOut, Series Protocol Trigger |
Decode Types |
IIC, SPI, UART/RS232, CAN, LIN |
MATH Operation |
A+B, A-B, AxB, A/B, FFT, Diff, Intg, Sqrt |
Automatic Measurement |
Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROV, FOV, RPRE, FPRE, Rise Time, Fall Time, Freq. Period, + Wid, - Wid, + Dut, - Dut, BWid, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF |
External Storage |
Bitmap save, CSV Save, Waveform Save, Setup Save |
Interface |
USB Host (Supports USB-GPIB), USB Device, LAN, EXT TRIG, Aux (TRIG OUT/Pass/Fail |
Display |
8" TFT-LCD (800x480) |
Max. Input Voltage |
±400V (DC+VppAC), CATI, CATII |
Power Supply |
AC 100-240V, 45-440Hz, 50VA Max |
Dimensions |
352mm x 112mm x 224mm (length x width x height) |
Weight |
Net Weight: 3.4kg(2CH), 3.5kg(4CH) |
Input |
Channels |
2/4 |
Coupling |
AC, DC, GND |
Impedance |
(1MΩ±2%)11 (23pF ±4pF)
50Ω: 50Ω±2% |
Max.Input voltage |
400Vrms, CAT I, 10X, 'IMO |
CH to CH Isolation |
>100:1 |
Probe attenuator |
1X, 10X, 50X, 100X, 500X,1000X |
Vertical System |
Vertical Resolution |
8 bit |
Vertical Scale |
2 mV/div - 10 V/div |
Offset Range |
2mV - 100mV: ± 1V
1.02mV - 1V: ± 10V
1.02V - 10V: ± 100V |
Hardware Bandwidth Limits |
20MHz ±40% |
Bandwidth Flatness |
DC- 10% of BW: ± 1dB
10% - 50% of BW: ± 2dB
50% - 100% of BW: + 2dB/-3dB |
Low Frequency Response (AC - 3dB) |
'10Hz |
Noise |
≤0.6 Div for average of 10 Pk-Pk readings, Fixed gain settings
≤1.0 Div for average of 10 Pk-Pk readings (152mV/div¬198mV/div,1.52V/div - 1.98V/div)
≤0.7 Div for average of 10 Pk-Pk readings, variable gain settings |
SFDR including harmonics |
≥35dB (10mV/div) ; ≥30dB (<10mV/div) |
DC Gain Accuracy |
≤ ±3.0%: 5mV/div -10V/div
≤ ±4.0%: 2mV/div |
DC Measurement Accuracy |
±[3%x (IReading1+10ffsetl) > 100mV/div)
1%xl0ffseti +0.2div+100mV] , |
Offset Accuracy |
± ( 1%*Offset+1%*8*div+2mV) |
Rise time |
<5.0ns |
<3.5ns |
<1.7ns |
<1.2ns |
Overshoot |
<10% |
Channel Skew |
<200ps |
Math Function |
Operation |
+, -, *, /, FFT, d/dt ,f dt,-4 |
FFT |
Window: Rectangular, Blackman, Hanning, Hamming
Sample points: 1024 |
Horizontal System |
Time base Scale |
1.0ns/div - 50s/div |
Waveform Capture |
110,000 wfm/s |
intensity grading |
256 Levels |
Display Format |
Y-T, Zoom, Roll, X-Y |
Time base Accuracy |
±25ppm |
Roll mode |
100ms/div - 50s/div (1-2-5 step) |
Trigger System |
Trigger Mode |
Auto, Normal, Single |
Trigger Level |
Internal: ±4.5 div from the center of the screen
EXT: ±1.2V ; EXT/5: ±6v |
Range |
100ns - 1.5s |
Holdoff Range |
AC, DC, LF Re], HF Re] |
Trigger Coupling |
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 5.8Hz
LF Rej: Blocks the DC component and attenuates the low-frequency components below 2.08MHz
HF Re]: Attenuates the high-frequency components above 1.27MHz |
Trigger Accuracy |
±0.2div |
Trigger Sensitivity |
Internal: 0.5 div
EXT: 200mVpp DC - 10MHz
300mVpp 10MHz - BW
EXT/5: 1Vpp DC- 10MHz
1.5Vpp 10MHz - BW |
Trigger Jitter |
<200ps |
Trigger Displacement |
Pre-Trigger: 7 divisions
Delay Trigger: lOs - 1,000,000,000s |
Edge Trigger |
Slope |
Rising, Falling, Rising & Falling |
Source |
CH1/CH2/CH3/CH4/EXT/(EXT/5)/AC Line |
Slope Trigger |
Slope |
Rising, Falling |
Limit Range |
< , > , < > , > < |
Source |
CH1/CH2/CH3/CH4 |
Time Range |
2ns - 4.2s |
Resolution |
1ns |
Pulse Trigger |
Polarity |
+wid , -wid |
Limit Range |
< , > , < > , > < |
Source |
CH1/CH2/CH3/CH4 |
Pulse Range |
2ns - 4.2s |
Resolution |
1ns |
Video Trigger |
Signal Standard |
NTSC,PAL/Secam,720p/50,720p/60,1080p/50,1080p/60, 1080i/50, 1080i/60,Custom |
Source |
CH1/CH2/CH3/CH4 |
Sync |
ANY,Select |
Window Type |
Absolute, Relative |
Source |
CH1/CH2/CH3/CH4 |
Interval Trigger |
Slope |
Rising,Falling |
Limit Range |
<, >, < >, >< |
Source |
CH1/CH2/CH3/CH4 |
Time Range |
2ns - 4.2s |
Dropout Trigger |
Timeout Type |
Edge, State |
Source |
CH1/CH2/CH3/CH4 |
Slope |
Rising, Falling |
Time Range |
2ns - 4.2s |
Resolution |
1 ns |
Runt Trigger |
Slope |
+wid , -wid |
Limit Range |
< , > , < > , > < |
Source |
CH1/CH2/CH3/CH4 |
Time Range |
2ns - 4.2s |
Resolution |
1 ns |
Pattern Trigger |
Pattern Setting |
Invalid, Low, High |
Logic |
AND, OR, NAND, NOR |
Source |
CH1/CH2/CH3/CH4 |
Limit Range |
< , > , < > , > < |
Time Range |
2ns - 4.2s |
Resolution |
1 ns |
|
Serial Trigger I2C Trigger |
Condition |
Start, Stop, Restart, No Ack, EEPROM, 7bits Address& Data, 10bits Address&Data, Data Length |
SPI Trigger |
Trigger Source |
MOSI, MISO |
Data Length |
4 — 96bits |
Value |
0, 1, X |
Bit Order |
LSB, MSB |
UART/ RS232 Trigger |
Trigger Setting |
Trigger SourceSource RX, TX
Condition Start, Stop, Data, Check Error |
Bus Configure |
Baud 600/1200/2400/4800/9600/19200/38400/ 57600/115200/Custom
Data Length 5bits, 6bits, 7bits, 8bits
Parity Check No, odd, even
Stop Bit 1, 1.5 , 2
Idle Level Low, High |
CAN Trigger |
Trigger Setting |
Condition Start, Remote Frame, Data Frame, ID&DATA |
Bus Configure |
Baud 5kb/s, 10kb/s, 20kb/s, 50kb/s, 100kb/s, 125kb/s, 250kb/s, 500kb/s, 800kb/s, 1Mb/s, Custom |
LIN Trigger |
Trigger Setting |
Condition Start, ID, ID&DATA, Error |
Bus Configure |
Baud 600/1200/2400/4800/9600/19200/Custom |
Serial Decode I2C |
Signal |
SCL, SDA |
Address |
7bits, 10bits |
List |
1 — 7 lines |
SPI |
Signal |
CLK, MISO, MOSI, CS |
Edge Select |
Rising, Falling |
Idle Level |
Low, High |
Bit Order |
MSB, LSB |
Data Length |
4 — 96 bits |
List |
1 — 7 lines |
UART/RS232 |
Signal |
RX, TX |
Configure |
Baud 600/1200/2400/4800/960019200/38400/ 57600/115200/Custom
Parity Check No, odd, even
Stop Bit 1, 1.5 , 2
Idle Level Low, High
Data Length 5bits, 6bits, 7bits, 8bits |
List |
1 - 7 lines |
CAN |
Signal |
CAN_H, CAN_L |
Configure |
Baud 5kb/s, 10kb/s, 20kb/s, 50kb/s, 100kb/s, 125kb/s, 250kb/s, 500kb/s, 800kb/s, 1Mb/s, Custom |
Decode Source |
CAN_H, CAN_L, CAN_H - CAN_L |
List |
1 - 7 lines |
LI N |
Configure |
Baud 600/1200/2400/4800/9600/19200/Custom |
List |
1 - 7 lines |
|
Measure System |
Auto Measurement (32 Types) |
Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms Vrms, ROV, FOV, RPRE, FPRE, Rise time, Fall time, Freq Period, + Wid, - Wid, + Dut, - Dut, BWid, Phase, FRR FRF, FFR, FFF, LRR, LRF, LFR, LFF |
Cursor |
Time (X1, X2), (X1X2)
Voltage (Y1, Y2), (Y1Y2) |
Statistics |
Current, Mean, Min, Max, Std-Dev, Count |
Sample System |
Sample Mode |
Real Time sample |
Sample Rate |
2GSa/s |
Memory Depth |
Max.28Mpts, available |
Acquisition |
Sample, Peak Detect, Average, High Res |
Averages |
4, 16, 32, 64, 128, 256, 512, 1024 |
Waveform Generator |
Channels |
1 |
Max. Frequency |
25MHz |
Sample Rate |
125 MSa/s |
Arb waveform length |
16 kpts |
Frequency Resolution |
1 pHz |
Vertical Resolution |
14 bits |
Amplitude Range |
2 mVpp - 3 Vpp (500)
4 mVpp - 6 Vpp (High-z) |
Sine Wave |
Frequency |
1pHz - 25MHz |
Offset Accuracy (100 kHz) |
±( 0.3dB of Setting Value + lmVpp) |
Amplitude flatness (100 kHz, 5Vpp) |
±0.3 dB |
SFDR |
DC - 1 MHz -60dBc
1 MHz - 5 MHz -53dBc
5 MHz - 25 MHz -35dBc |
Square/Pulse Wave |
Frequency |
1pHz - 10MHz |
Duty Cycle |
20% - 80% |
Rise/Fall time |
24 ns (10% - 90%) |
Overshoot |
5%(1kHz, 1Vpp, Typeical ) |
Pulse Width |
48ns-1ms |
Jitter |
8ns |
Ramp Wave BM |
Frequency |
lpHz - 300kHz |
Linearity |
0.1% of Pk-Pk value |
Symmetry |
0% - 100% |
DC Offset |
Range |
±1.5 V ( 500 )
±3.0 V (High) |
Offset Accuracy |
( 'setting valuel*1%+3 mV) |