SKF CMSS 2100F-33 - Accelerometer with Integral Cable, Straight Exit

0 reviews | UPC: 7316575654252 | Model: SKF CMSS 2100F-33

Compare

CONDITION MONITORING

Cannot Ship Air

For use with all SKF on-line surveillance systems
Economical, top exit design
Rugged, corrosion resistant and hermetically sealed
Case isolation
Meets CE, EMC requirements
Two mounting studs (1/4 -28 and M8 × 1,25) provided
ESD protection
Reverse wiring protection

View Product Details

List Price: $1,398.24

Your Price: $689.22

In Stock:

View Payment Options

Request Quote

Non-Cancellable / Non-Returnable

Recommended for you

SKF CMSS 2100F-33 - Accelerometer with Integral Cable, Straight Exit

For use with all SKF on-line surveillance systems
Economical, top exit design
Rugged, corrosion resistant and hermetically sealed
Case isolation
ESD protection

The CMSS 2100F accelerometer is a good multi-purpose sensor with integral cable for light to medium-duty applications in the following industries: automation, food and beverage, pulp and paper, water and waste-water. Common applications include general purpose machines such as pumps, motors, and fans.

Dynamic
Sensitivity	100 mV/g
Sensitivity Precision	±5% at 24 °C (75 °F)
Acceleration Range	80 g peak
Amplitude Linearity	1%
Frequency Range	±5%: 3,0 to 5 000 Hz
	±10%: 1,0 to 9 000 Hz
	±3 dB: 0,5 to 14 000 Hz
Resonance Frequency, Mounted, Nominal	30 kHz
Transverse Sensitivity	: ≤ 5% of axial
Temperature Response	See graph
Electrical
Power Requirements Voltage Source Constant Current Diode
	18 to 30 V DC
	2 to 10 mA
Electrical Noise Broadband: Spectral:
	2,5 Hz to 25 kHz: 700 µg
	10 Hz: 10 µg/√Hz
	100 Hz: 5 µg/√Hz
	1 000 Hz: 5 µg/√Hz
Output Impedance	< 100 Ω
Bias Output Voltage	12 V DC
Grounding	Case isolated, internally shielded

Environmental

Temperature Range	–50 to +120 °C (–60 to +250 °F) operating temperature
Vibration Limit	500 g peak
Shock Limit	5 000 g peak
Electromagnetic Sensitivity, Equivalent g maximum	70 µg/gauss
Sealing	Hermetic
Hydrostatic Pressure	0.0002 g/µstrain
CE	According to the generic immunity standard for Industrial Environment EN 50082-2
Acceptance criteria: The generated “false equivalent g level” under the above test conditions should be less than 2 mg measured peak to peak

Physical

Dimensions	See Drawing
Weight	90 g (3.2 oz.)
Case Material	316L stainless steel
Mounting	Internal 1/4-28 thread
Mounting torque	2.9 Nm (24 in. lbs.)
Connections Power/Signal: Common: Case:
	White
	Black
	Shield
Integral Cable:	Fluorine based polymer, 5 m (16.4 ft.) blunt cut

Test Equipment General Attributes
Product Height	4.00 IN
Product Length	4.00 IN
Product Width	4.00 IN
Shipping Weight	1.55 LBS
Shipping Height	4.00 IN
Shipping Length	4.00 IN
Shipping Width	4.00 IN