High Temperature 2 Socket MS Cable Assembly (16 ft Length, Standard, Tinned Leads on Fly end)
The CMCP602HST Series High Temperature Accelerometer Extension Cables are designed for use with piezoelectric accelerometers featuring a 2 Pin Mil Spec MS 5015 connector (standard 2 pin connector). The CMCP602HST Series cables utilize a low noise cable with an overall braided copper shield to maximize the signal quality of the sensor. The overall red FEP jacket provides excellent temperature, chemical, and sunlight protection while also providing the flexibility required to extend the life of the cable assembly. Each cable assembly is fitted with a 2 Socket MS 5015 connector that is fully encapsulated with epoxy to ensure water resistance. The CMCP602HST cable assemblies are available in both Isolated (for grounding at the instrument end) and Non-Isolated (for grounded at the sensor end) versions. The North American standard is Isolated.
Model Guide:
CMCP603HST – aa – bb – cc – dd
Aa = Cable length
- 16 – 16 ft (5m) long
- 32 – 32 ft (10m) long
- 64 – 64 ft (20m) long
- Other lengths are available
Bb = Cable type
- 01 – Standard cable, no armor
Cc = Lead/End type
- 01 – Tined Leads on Fly End (Terminal Block Connection)
- 02 – Spade Lugs Installed on Leads (for Screw Terminals)
- 03 – BNC Jack on Fly End
- 04 – BNC Plug on Fly End
Dd = Shield connection
- I or Blank – Shield not connection
- NI – Non-isolated – Shield connected at the sensor end
Example Part Number:
- CMCP602HST-16-01-01
- 2 Socket MS Cable Assembly
- 16’ (5m) Long
- Standard Cable, No Armor
- Tinned Leads on Fly End