The SCS Single-Wire Smocks are designed to be antistatic, low tribocharging, and create a Faraday Cage around the torso and arms of the wearer to protect ESD susceptible items from electrostatic fields generated by charges on the operator’s clothing. Static control garments are intended to attenuate electrostatic fields that may be present on personnel clothing. SCS Single-Wire Smocks meet the requirement for Groundable Static Control Garment System per ANSI/ESD S20.20 required limit of < 3.5 x 10E7 ohm Rtg tested per ANSI/ESD STM2.1 and ESD TR53.

The SCS Single-Wire Smocks are constructed of a lightweight dissipative material which made from texturized polyester and a minimum of 9% carbon nylon monofilament. The conductive nylon fibers are woven in a chain-link design throughout the material, providing continuous and consistent charge dissipation. All of the seams in the smocks are designed to maintain electrical continuity from panel to panel and from sleeve to sleeve in accordance with the ESD Association Garment Standard, ESD-STM2.1. The conductive fabric in smock is a conductor. If not grounded, the smock can become an isolated charged conductor. If not grounded via a wrist strap coil cord, ground the ESD garment using ESD footwear to ESD flooring.

SCS Single-Wire Smocks incorporate a hip-to-cuff grounding feature which allows for hands-free grounding with no cord attached to the operator’s wrist. This feature allows connection of a ground cord to a 4mm snap stud on the hip. A seam of carbon-suffused threads provides a secure and direct electrical connection from the snap stud on the hip to conductive elastic cuffs. Smocks ground the person when used in this manner. Standard touch testing or continuous monitoring can be used to test the hip-to-cuff function.

These are the standard/stocked sizes. Please see SCS Single-Wire Smocks BTO for additional sizes (3XL/4XL/5XL/6XL).

SCS Single-Wire Static Control Smock features and attributes:

• Groundable static control garment system - Meets ANSI/ESD S20.20 (Rtg < 3.5 X 10E7 ohms) Requirement Tested Per ANSI/ESD STM2.1 and ESD TR53; Allows operators and smock to be bonded or electrically connected to remove electrostatic charges to the ground to limit ESD events in ESD Protected Areas
• Hip-to-cuff grounding - Improves productivity, grounds operator with no need for a cord to be attached to the operator's wrist
• Jacket length with ‘set-in’ style sleeves, reinforced hem V-neck, stainless steel snaps - Provides durability; tailored quality
• 3 pockets - 1 chest pocket and 2 hip pockets
• Tag-free neck label - Sizing, laundering info sublimated on inside of the back collar
• Minimum of 9% Carbon conductive nylon fibers woven in chain-link design - Provides continuous and consistent charge dissipation throughout the lifetime of smock
• Creates Faraday Cage effect around torso and arms of operator - Shields ESD charges on operators' clothing from damaging ESD-sensitive items
• Panel-to-panel conductivity - Prevents isolated charged conductor in ESD Protected Area
• Made in the USA