The SCS Dual-Wire Static Control Smock is designed for use with dual-wire grounding systems. One conductive cuff is electrically bonded to the dissipative garment and one snap stud at the hip. The second conductive cuff uses an isolated conductive path to bond to a second snap stud at the hip. The smock’s dual-wire circuit loop closes when its two conductive cuffs are bridged by the skin on the wearer’s wrists.

The SCS Dual-Wire Static Control Smock creates a Faraday cage around the torso and arms of the wearer and protects ESD susceptible items from the electrostatic fields generated by the wearer’s clothing. The path-to-ground integrity of the SCS Dual-Wire Static Control Smock can be verified with constant monitors or personnel grounding testers.

SCS Dual-Wire Static Control Smocks are constructed of a lightweight dissipative material which is made from texturized polyester and a minimum of 9% carbon nylon monofilament. The conductive nylon fibers are woven in a chain-link design throughout the material, providing continuous and consistent charge dissipation. All of the seams in the smocks are designed to maintain electrical continuity from panel to panel and from sleeve to sleeve in accordance with the ESD Association Garment Standard, ESD STM2.1.

SCS Dual-Wire Static Control Smocks incorporate a hip-to-cuff grounding feature which allows for hands-free grounding with no cord attached to the operator’s wrist. This feature allows connection of a proprietary SCS magnetic dual-wire ground cord (sold separately) to two snap studs on the hip. A seam of carbon-suffused threads provides a secure and direct electrical connection from the snap studs on the hip to conductive elastic cuffs. The SCS Dual-Wire Static Control Smock grounds the operator when used in this manner. Dual-wire personnel grounding testers or continuous monitors can be used to verify the hip-to-cuff function.

These items are Built-to-Order with a minimum order quantity of 1. See SCS Dual-Wire Smocks for standard/stocked sizes (X-Small/S/M/L/XL/2XL).

SCS Dual-Wire Static Control Smock features and attributes:

• Groundable static control garment system - Meets ANSI/ESD S20.20 (Rtg < 3.5 X 10E7 ohms) Requirement Tested Per ANSI/ESD STM2.1 and ESD TR53; Allows operators and smock to be bonded or electrically connected to remove electrostatic charges to ground to limit ESD events in ESD Protected Areas
• Hip-to-cuff grounding - Improves productivity, grounds operator with no need for a cord to be attached to the operator's wrist
• Jacket length with ‘set-in’ style sleeves, reinforced hem V-neck, stainless steel snaps - Provides durability; tailored quality
• 3 pockets - 1 chest pocket and 2 hip pockets
• Tag-free neck label - Sizing, laundering info sublimated on inside of the back collar
• Compatible with SCS 724 Workstation Monitor and other dual-wire continuous monitors - Pairs with the SCS 770110 and 770111 MagSnap Dual-Wire Coil Cords
• Minimum of 9% Carbon conductive nylon fibers woven in chain link design - Provides continuous and consistent charge dissipation throughout lifetime of smock
• Creates Faraday Cage effect around torso and arms of operator - Shields ESD charges on operators' clothing from damaging ESD sensitive items
• Panel-to-panel conductivity - Prevents isolated charged conductor in ESD Protected Area
• Made in the USA