Ionized Air Blower
The SCS 961JH Ionized Air Blower is used for neutralizing electrostatic charges on insulators and ungrounded conductors. Its discharge times (< 2 seconds at 12 inches) and ±15 volt offset voltage exceed the required limits of ANSI/ESD S20.20 and ESD TR53. The 961JH Ionized Air Blower features a powder coated steel enclosure and stainless steel multi-mount stand.
The 961JH Ionized Air Blower operates on steady-state DC. Steady-State DC systems consist of separate negative and positive ion emitters connected by a pair of high-voltage cables to their respective high-voltage power supplies. DC power is constantly applied to the emitter points. The ionizer maintains its offset voltage via its grounded enclosure and finger guard.
- Steady-state DC Single-fan Ionizer
- Neutralizes electrostatic charges on insulators and ungrounded conductors positioned 12 to 48 inches directly in front of it
- Less than 2 Seconds Discharge Time with ±15 Volts Balance
- Meets the ANSI/ESD S20.20 required limits for ionization tested per ANSI/ESD STM3.1 and ESD TR53
- Maintains voltage output via the grounded enclosure and finger guard
- Quick Setup, utilizes a single fan speed for hassle-free operation
- Powder-coated Steel Housing with Stainless-steel Stand
- Minimizes foreign object debris, corrosion, and other contaminations when used in clean or sensitive areas
- Complies with UL safety requirements
- 120 VAC Input Rating with North American Power Cord
- Works with standard electrical systems in North America and Japan
- NIST Calibrated; calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.