The SCS MagSnap 360 Dual-Wire Metal Wrist Strap Kits feature a dual wire metal expansion wristband with a magnetic connection between the wristband and the coil cord. The magnetic connection creates a superior electrical connection to eliminate intermittent failures that can occur in traditional snap connections using springs, extends the lifespan of the wrist strap, and maintains a 1-5 pound perpendicular breakaway force to prevent accidental disconnects. The MagSnap 360 design allows the coil cord to rotate 360° on the wristband to promote comfort, freedom of motion, and reduce strain on the operator's wrist. The dual wire metal expansion wristband and coil cord create a path-to-ground for an operator with resistance < 3.5 x 10E7 ohms per the required limits of ANSI/ESD S20.20, tested per ANSI/ESD S1.1 or ESD TR53. If one conductor is damaged, the operator will maintain the path-to-ground through the other conductor.

SCS MagSnap 360 wrist straps are date coded (to track lifespan; ensure quality control), UL Listed and made in the USA.

Please see Data Sheets in the Documents section for specifications.

SCS MagSnap 360 Dual-Wire Metal Wrist Strap Kits (available w/o coil cord):

• MagSnap 360 Metal Expansion Wristband - Medical grade series stainless steel backplate and links create a more reliable path-to-ground for the operator and are ideal for use with low voltage style monitors
• .002in polyphenylsulfone sheet laminated to each link. Provides > 5,000 VRMS insulation per ASTM D149. Will not flake or peel
• Unique dual contact design to be paired with SCS MagSnap 360 Coil Cords
• Black ABS plastic cap; UL Listing 90P1C
• Inside links 300 Series Stainless Steel, links width 0.63in
• MagSnap 360 Coil Cord - 3.5mm right-angle mono plug connector; relaxed retraction coil cord
• Thermoplastic elastomer strain relief
• Black PVC insulation; Break load 30lbs
• Dual T-3067 tinsel conductor
• 1 Megohm (=/- 5%) current limiting resistors on both conductors
• Compatible with SCS Workstation Monitors