The SCS 1964 Series Conductive Vinyl Flooring is designed to rapidly drain off static electricity meeting ANSI/ESD S20.20 tested per ANSI/ESD S4.1 & ESD TR53. Providing a static-safe conductive work area for a wide variety of applications where ESD properties are required, 1964 Series Vinyl Flooring is non-carbon loaded, non-sloughing and permanently conductive.

1964 4x6 Mat Kit Includes:

• Floor Mat, 4x6
• Mat Ground Cord, 15ft, 10mm, 1 Meg Resistor
• (2) 3/8in Snaps (installed on long side of mat)

1964 3x60 Mat Roll Includes:

• Floor Mat Roll, 3x60
• No Hardware

SCS 1964 Series Conductive Vinyl Floor Mat, Roll:

• Conductive vinyl floor matting - Provides a flooring surface that does not generate a static charge and will act as part of the path to ground for an operator wearing ESD footwear
• Conductive (Rtt: < 1 x 10E6 ohms per ANSI/ESD 7.1 and ESD TR53) pebble embossed surface - Meets the required limits of ANSI/ESD S20.20 Method 1 (< 3.5 x 10E7 ohms) for a flooring/footwear system; Resistance range of the surface layer remains low enough to act as a path to ground with the normal build-up of dirt and grime on the mat
• Non-carbon loaded, non-sloughing and permanently conductive - Providing a static-safe conductive work area for a wide variety of applications where ESD properties are required.
• Made in the USA