Rohde and Schwarz ZVH-K29 - Pulse Measurements with Power Sensor Option for ZVH

Name: Rohde and Schwarz ZVH-K29 - Pulse Measurements with Power Sensor Option for ZVH
Brand: Rohde & Schwarz
SKU: Rohde & SchwarzZVH-K29
Price: 1575.00 USD
Availability: InStock

0 reviews | Catalog: 1304.0491.02 | Model: Rohde & Schwarz ZVH-K29

Compare

Pulse Measurements with Power Sensor Option

Pulse Measurements with power sensor option
For ZVH4 and ZVH8
When used with NRP-Z81/-Z85/-Z86 wideband power sensors, the ZVH can measure peak power and the main pulse parameters up to 44 GHz
Achievable RF performance is documented in the data sheet specifications of the R&S NRP-Z81/-Z85/-Z86 power sensors
Power sensors sold separately
Requires R&S FSH-Z129 for R&S ZVH4 with serial numbers < 115331 and R&S ZVH8 with serial numbers < 115239

View Product Details

Your Price: $1,575.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded.
Request a Demo

View Payment Options

Request Quote

Rohde and Schwarz ZVH-K29 - Pulse Measurements with Power Sensor Option for ZVH

Pulse Measurements with power sensor option
For ZVH4 and ZVH8
When used with NRP-Z81/-Z85/-Z86 wideband power sensors, the ZVH can measure peak power and the main pulse parameters up to 44 GHz
Achievable RF performance is documented in the data sheet specifications of the R&S NRP-Z81/-Z85/-Z86 power sensors
Power sensors sold separately

When equipped with the R&S ZVH-K29 option and an R&S NRP-Z81/-Z85/-Z86 wideband power sensor, the R&S ZVH can measure peak power and the main pulse parameters up to 44 GHz. Achievable RF performance is documented in the data sheet specifications of the R&S NRP-Z81/-Z85/-Z86 power sensors.

Graphical result display (Power vs Time)

The graphical representation of the results is a special feature only available with the firmware option R&S ZVH-K29.

Connected power sensor model
Header table showing various hardware settings
Marker table
Numerical results showing the pulse characteristics
Diagram showing the pulse characteristics in a graphical format (trace display)
Measurement frequency
Scale of the x-axis
Softkey menu of the pulse power measurement application

The following power characteristics are calculated and displayed as numerical values (see also the figure below for a graphical representation of the parameters).

Pulse characteristic	Description
Pulse Width	Time that the pulse remains at the top level ("ON"). This is the time between the first positive edge and the subsequent negative edge of the pulse in seconds, where the edges occur at crossings of the mid threshold.
Pulse Period	Time that is elapsing from the beginning of one pulse to the beginning of the next pulse.
Pulse Off Time	Time in the displayed trace that is not occupied by the pulse.
Rise Time	Time required for the pulse to transition from the base to the top level. This is the difference between the time at which the pulse exceeds the lower and upper thresholds.
Fall Time	Time required for the pulse to transition from the top to the base level. This is the difference between the time at which the pulse drops below the upper and lower thresholds.
Duty Cycle	Ratio of the "Pulse Width" to "Pulse Repetition Interval" expressed as a percentage (requires at least two measured pulses).
Start Time	Time offset, relative to the beginning of the trace (0 sec), where the pulse begins (start of the rise time).
Stop Time	Time offset, relative to the beginning of the trace (0 sec), where the pulse stops (end of the fall time).
Pulse Top	Median pulse ON power. The value of this parameter is used as a reference (100%) to determine other parameter values such as the rising / falling thresholds.
Pulse Base	Median pulse OFF power. The value of this parameter is used as a reference (0%) to determine other parameter values such as the rising / falling thresholds.
Trace Average	Average power of the signal displayed in the diagram.
Trace Peak	Maximum power of the signal displayed in the diagram.
Trace Min	Minimum power of the signal displayed in the diagram.
Positive Overshoot	Height of the local maximum after a rising edge, divided by the pulse amplitude. The result is a percentage of the pulse amplitude.
Negative Overshoot	Height of the local minimum after a rising edge, divided by the pulse amplitude. The result is a percentage of the pulse amplitude.

0

Out of 5

Average Customer Review

Share your thoughts with other customers

Write a Review

Real people, here to help you.

Get Connected

Join the community and find out what we're up to, experience live product releases, webinars and more!

Buy from people, not just the internet™



Product	Rohde & Schwarz ZVH-K29 Pulse Measurements with Power Sensor Option	Rohde & Schwarz ZVH-K1 Spectrum analysis measurement, application (unregistered license)	Rohde & Schwarz ZVH-K14 Spectrogram Measurement, Application (Unregistered License)	Rohde & Schwarz ZVH-K19 Channel Power Meter (Unregistered License)	Rohde & Schwarz ZVH-K39 Transmission Measurement, Application (Unregistered License)	Rohde & Schwarz ZVH-K40 Remote Control via USB or LAN, Application (Unregistered License)	Rohde & Schwarz ZVH-K42 Vector Network Analysis, Application (Unregistered License)	Rohde & Schwarz ZVH-K45 Vector Voltmeter Measurement, Application (Unregistered License)	Rohde & Schwarz ZVH-K9 Power Meter Measurement, Application; R and S FSH-Power Sensors or ...
Price
In Stock
Compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare

Rohde and Schwarz ZVH-K29 Specification
Measurements
Pulse power parameters	●
Peak power	●
Pulse top power	●
Average power	●
Base power	●
Minimum power	●
Positive overshoot	●
Negative overshoot	●
Pulse timing parameters	●
Pulse duration	●
Pulse period	●
Pulse start/stop time	●
Rise/fall time	●
Duty cycle	●

Test Equipment General Attributes
ECCN Number	FREI-INLAND
Country of Origin	Malaysia

How Can We Help You?

Questions?

Log in to Your Account

Not a member yet? It's FREE!

Top Categories

Rohde and Schwarz ZVH-K29 - Pulse Measurements with Power Sensor Option for ZVH

Items in This Series

Recommended for you

Rohde and Schwarz ZVH-K29 - Pulse Measurements with Power Sensor Option for ZVH

Graphical result display (Power vs Time)

Tech Specs

Test Equipment General Attributes

0

Featured Review

We'd love to hear from you

Real people, here to help you.

Get Connected

My Account

Promotions & Offers

Resources

Company