Rohde & Schwarz RTO6-K81 - PCI Express 1.1/2.0 Compliance Test (Catalog 1801.6964.02)

The option is used in combination with the free-of-charge R&S ScopeSuite PC software, which can be downloaded from the Rohde & Schwarz website. R&S®RTO6-K81 performs PCIe 1.x/2.0 (up to 2.5GT/s) compliance test measurements with R&S ScopeSuite. R&S ScopeSuite supports Windows 7, 8 and 10. The option can only be used with an R&S RTO6-B96 option. The chapters after the category refer to PCI Express Base Specification Revision 1.1 and 2.1.

ScopeSuite PC Software

Easy configuration and automatic control

R&S ScopeSuite is a generic compliance test software that runs on the R&S RTO6 oscilloscope or separate PC. It controls the measurement settings and test sequences on the oscilloscope and guides you through all the selected tests based on the test setup. Detailed instructions make it easy to correctly connect the oscilloscope and probes to the test fixture and DUT. User data, the test setup settings and measurement report definitions are easy to configure. The limit editor lets you individually adjust standard-specific test limits.

Straightforward, configurable reports

Documenting the measurement results is essential to compliance tests. R&S ScopeSuite offers an extensive range of documentation functions. You can add measurement details and screenshots to the pass/fail results. Available output formats are PDF, DOC and HTML.

High Speed Signal Test Report

High Speed Signal Quality - EL_4

Additional Information

Flexible test execution

For debugging during development or stability tests, you can repeat single tests or a sequence of tests as often as required. Between single tests, you can change limit lines or other parameters for every test and compare their impact on the results. For documentation, R&S ScopeSuite generates a test report from the selected test results.