| CAN triggering and decoding |
| Protocol configuration |
signal type |
CAN_H, CAN_L |
| bit rate |
standard bit rate (10/20/33.3/50/83.3/100/125/250/500/1000 kbps) or user-defined bit rate in range from 10 kbps to 1 Mbps |
| sampling point |
10% to 95% within bit period |
| device list |
associate frame identifier with symbolic ID, load DBC file content |
| auto threshold setup |
assisted threshold configuration for CAN triggering and decoding (software) |
| Trigger |
source |
any input channel or logical channel |
| trigger event setup |
start of frame, end of frame, frame type, identifier, identifier + data, error condition (any combination of CRC error, bit stuffing error, form error and ACK error) |
| identifier setup |
frame type (data, remote or both), identifier type (11 bit or 29 bit); condition =, ≠, identifier selectable from label list |
| data setup |
data pattern up to 8 byte (hex or binary); condition =, ≠ |
| Decode |
source |
any input channel or logical channel |
| display type |
decoded bus, tabulated list |
| color coding |
start of frame, identifier, DLC, data payload, CRC, end of frame, error frame, overload frame, CRC error |
| data format |
hex, decimal, octal, binary, ASCII, symbolic |
| LIN triggering and decoding |
| Protocol configuration |
version |
1.3, 2.x or SAE J602; mixed traffic is supported |
| bit rate |
standard bit rate (1.2/2.4/4.8/9.6/10.417/19.2 kbps) or used-defined bit rate in range from 1 kbps to 20 kbps |
| signal polarity |
idle low, idle high |
| device list |
associate frame address with symbolic ID (software) |
| auto threshold setup |
assisted threshold configuration for CAN triggering and decoding (software) |
| Trigger |
source |
any input channel or logical channel |
| trigger event setup |
start of frame (sync break), identifier, identifier + data, wakeup frame, error condition (any combination of checksum error, parity error and sync field error) |
| identifier setup |
range from 0d to 63d; condition =, ≠; identifier selectable from label list |
| data setup |
data pattern up to 8 byte (hex or binary); condition =, ≠ |
| Decode |
source |
any input channel, logical channel |
| display type |
decoded bus, tabulated list |
| color coding |
frame, frame identifier, parity, data payload, checksum, error condition |
| data format |
hex, decimal, octal, binary, ASCII |