Rohde & Schwarz RT-ZD08 - Differential Probe, 800 MHz

Name: Rohde & Schwarz RT-ZD08 - Differential Probe, 800 MHz
Brand: Rohde & Schwarz
SKU: Rohde & SchwarzRT-ZD08
Price: 4310.00 USD
Availability: InStock

0 reviews | Catalog: 1333.0838.02 | Model: Rohde & Schwarz RT-ZD08

Compare

Active differential probe, 800MHz, 10:1, 1pF, 200kOhm, battery or USB powered

800 MHz bandwidth
High input resistance of 200 kΩ
Low input capacitance of 1 pF
High dynamic range of ±15 V differential and ±30 V common
Universal power supply using battery or USB cable

View Product Details

Your Price: $4,310.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99 - Code: FREESHIP
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded. - USE CODE FREESHIP at checkout

Valid on Web Price Only!
Request a Demo

View Payment Options

Request Quote

Recommended for you

Rohde & Schwarz RT-ZD08 - Differential Probe, 800 MHz

Typical Applications:

Differential signals like CAN Bus or LVDS
DC-DC converter

The RT-ZD08 800 MHz Differential probe is best suited for measurements of high-speed differential signals. These signals are commonly used in digital and power applications and especially at serial buses like CAN. The RT-ZD08 can be powered by USB or battery and is compatible with all oscilloscopes with 50 Ω BNC inputs. Oscilloscopes without 50Ω input need a 50 Ω feed through BNC adapter.

The probe has a high input resistance of 200 kΩ combined with 1 pF input capacitance. This secures a low loading of the device under test. The attenuation of the RT-ZD08 is 10:1.

1 RT-ZD08 800 MHz differential probe
1 EZ Hook, red
1 EZHook, black
1 Micro IC-Clip, red
1 Micro IC-Clip, black
6 Signal Pins, single
2 Signal Pins, dual, 16.8 mm
2 Signal Pins, dual, 12.8 mm
1 Extension lead, 10 cm, red
1 Extension lead, 10 cm, black
1 Extension lead, 5 cm, red
1 Extension lead, 5 cm, black
1 USB Power Cord (2 m)
1 9 V Battery
1 Manual

Specifications (all data valid at 23 °C after 30 minutes warm up)
Electrical Specifications
Bandwidth (-3 dB)	800 MHz, typ.
Attenuation Ratio	10 : 1
Probe Risetime (10%-90%)	437 ps
Gain Accuracy	±2%, typ.
Absolute Maximum Rated Input Voltage (each side to ground)	±40 V
Maximum Differential Input Voltage (DC+AC Peak)	±15 V
Maximum Common Mode Input Voltage	±30 V
Input Resistance / Input capacity	each side to ground: 100 kΩ, 2 pF between inputs: 200 kΩ, 1 pF
Output Voltage Swing	±1.5 V (on 50 Ω scope input)
Offset	±5 mV, typ.
CMRR	-60 dB at 60 Hz, typ. -15 dB at 500 MHz, typ.
Power Requirements	one 9 V battery or USB power adapter (5 V to 9 V, 300 mA)
Approx. Battery Life	4.5 hours (alkaline battery)
Battery/Power Cord	The supplied voltage must be less than 12 V and greater than 4.5 V or else the probe could be damaged
Mechanical Specifications
Approximate Weight	170 g (not including battery and accessories)
BNC Cable Length	120 cm
Length of Input Leads	15 cm
Dimensions (LxWxH)	111 x 22 x 14 mm
Environmental Specifications
Temperature range	operating: 5 °C to +40 °C non-operating: -20 °C to +70 °C
Altitude operating	3,000 m
non-operating	15,300 m
Humidity	25 - 85% indoor use only