| Electrical specifications |
| Outputs |
The channel outputs are galvanically isolated and not connected to ground |
| Number of output channels |
|
1 |
| Total output power |
|
max. 60 W |
| Output voltage |
|
0 V to 20 V |
| |
|
|
| Maximum output current per channel |
≤ 6 V output voltage |
8 A |
| |
> 6 V output voltage |
3 A |
| Adjustable output impedance |
|
–50 mΩ to 100 Ω |
| Increments |
|
1 mΩ |
| Recovery time |
≤ 2 Ω, resistive load |
< 200 µs |
| |
> 2 Ω, resistive load |
< 10 ms |
| |
|
|
| Voltage ripple and noise |
20 Hz to 20 MHz |
< 500 µV (RMS),
< 2 mV (peak-to-peak) (meas.) |
| Current ripple and noise |
20 Hz to 20 MHz |
< 1 mA (RMS) (meas.) |
| Electronic load |
| Sink voltage range |
|
0 V to 20 V |
| Maximum sink power |
|
60 W |
| Maximum sink current |
voltage: > 6 V |
8 A |
| |
voltage: > 6 V |
3 A |
| Sink modes |
|
constant voltage, constant current, constant resistance |
| |
|
|
| Constant resistance range |
|
0 Ω to 10 kΩ (0.1 Ω increments) |
| Load regulation in voltage priority mode |
load change: 10% to 90% |
|
| Voltage |
±(% of output + offset) |
< 0.01% + 0.5 mV |
| Voltage load recovery time in standard mode |
regulation to within a band of ±20 mV of the set voltage |
< 30 µs (meas.) |
| Voltage load recovery time in high-capacity mode |
regulation to within a band of ±20 mV of the set voltage |
10 µF to 50 µF (mode low): < 30 µs (meas.)
> 50 µF to 470 µF (mode high): < 100 µs (meas.) |
| Load regulation in current priority mode |
load change: 10% to 90% |
|
| Current |
±(% of output + offset) |
< 0.01% + 0.1 mA |
| Current load recovery time |
regulation to within a band of ±20 mA of the set current |
< 50 µs (meas.) |
| Rise time |
10% to 90% of rated output voltage, resistive load |
full load: < 100 µs
no load: < 100 µs |
| Fall time |
90% to 10% of rated output voltage, resistive load |
full load: < 100 µs
no load: < 100 µs |
| Minimum pulse width |
|
100 µs |
| Programming resolution |
| Voltage |
|
20 V range: 200 μV
6 V range: 50 μV |
| Current |
|
8 A range: 50 μA
3 A range: 25 μA
100 mA range: 1 μA
10 mA range: 100 nA |
| Programming accuracy |
| Voltage |
±(% of setting + offset) |
20 V range: < 0.02% + 2 mV
6 V range: < 0.02% + 1 mV |
| Current |
±(% of setting + offset) |
8 A range: < 0.05% + 2 mA
3 A range: < 0.025% + 500 μA
100 mA range: < 0.025% + 25 μA
10 mA range: < 0.025% + 10 μA |
| Output measurements |
| Measurement functions |
|
voltage, current, power, energy |
| Readback resolution |
| Voltage |
|
20 V range: 10 μV
6 V range: 1 μV |
| Current |
|
10 A range: 10 μA
3 A range: 1 μA
100 mA range: 100 nA
10 mA range: 10 nA
1 mA range: 1 nA
10 µA range: 100 pA |
| Readback accuracy |
| Voltage |
±(% of output + offset) |
20 V range: < 0.02% + 2 mV
6 V range: < 0.02% + 500 μV |
| Current |
±(% of output + offset) |
10 A range: < 0.025 % + 500 μA
3 A range: < 0.025 % + 250 μA
100 mA range: < 0.025 % + 15 μA
10 mA range: < 0.025 % + 1.5 μA
1 mA range: < 0.025 % + 150 nA
10 μA range: < 0.025 % + 15 nA |
| Temperature coefficient (per °C) |
+5 °C to +20 °C and +30 °C to +40 °C |
|
| Voltage |
|
0.15 × specification/°C |
| Current |
|
0.15 × specification/°C |
| Remote sensing |
|
yes |
| Maximum sense compensation |
20 V range |
2 V (meas.) |