• Application bundle
• Compatible with MXO5 oscilloscopes
• Oscilloscope sold separately 

The Rohde & Schwarz MXO5-PK1 is an application bundle for use with MXO5 oscilloscopes. It includes the following options:

• MXO5-K510 - low speed serial triggering/decode
• MXO5-K520 - automotive serial triggering/decode
• MXO5-K31 - power analysis
• MXO5-K36 - frequency response analysis
• MXO5-B6 - arbitrary waveform generator

The MXO5-PK1 contains two serial triggering and decode options.

• MXO5-K510
• Low speed serial triggering/decode
• I2C/SPI/RS-232/RS-422/RS-485/UART
• MXO5-K520
• Automotive serial triggering/decode
• CAN/CAN FD/CAN XL/LIN

Measuring AC circuit power quality can be tedious due to the numerous calculations required to determine the real, apparent, and reactive power. An oscilloscope is ideal for this work because it provides a clear view of the waveform characteristics between voltage and current, allowing engineers to quickly identify and resolve problems. The R&S MXO5-K31 enables power quality measurements and provides concurrent analysis of three pairs of voltage and current sources.

Different standards for limiting the harmonic current must be met in AC power supplies. Identifying distortion from harmonic content is tedious without a proper tool. The R&S MXO5-K31 includes current harmonic analysis to help test in line with all common standards. Users can set up three concurrent harmonic measurements.

Quickly perform low-frequency response analysis with the R&S MXO5-K36 frequency response analysis (FRA) option. Easily characterize the frequency response of various electronic devices, including passive filters and amplifier circuits.

Precisely measure the control loop response (CLR) and power supply rejection ratio (PSRR) in switch mode power supplies.

• Frequency range: 10 mHz to 100 MHz
• Amplitude mode: Fixed or amplitude profile
• Amplitude level: 10 mV to 10 V into high Z; 5 mV to 5 V into 50 Ω
• Test points: 10 points to 500 points per decade

The FRA option leverages the oscilloscope's built-in waveform generator to create stimulus signals from 10 mHz to 100 MHz. By measuring the stimulus signal to output signal ratio for the device under test at each test frequency, the oscilloscope accurately plots logarithmic gain and phase for valuable insights into your device's behavior.

Get fully the integrated two-channel 100 MHz arbitrary waveform generator with the R&S MXO5-B6 option.

This compact and configurable solution offers exceptional versatility for various applications, from hardware prototyping to classroom usage. With a sampling rate of 625 Msample/s and 16-bit resolution, the generator delivers reliable performance and precise control as a function or modulation generator.

Wide range of waveforms and modulation types

Stimulate your device under test with a diverse range of waveforms. Choose from sine, square/pulse, ramp, triangle, sine cardinal (sinc), arbitrary and noise waveforms.

Easily customize the frequency, amplitude, offset, and noise parameters for each waveform, tailoring the stimulus to your specific needs. Get integrated arbitrary waveform generation capabilities. Take advantage of the modulation feature to explore advanced signal variations.

Features include:

• Analog output: 2 channels
• Bandwidth: 1 mHz to 100 MHz
• Amplitude high impedance: 20 mV to 10 V (peak-to-peak), 50 Ω: 10 mV to 5 V (peak-to-peak)
• Arbitrary waveform length: 1 sample to 312.5 Msample
• Sample rate: 625 Msample/s
• Vertical resolution: 16-bit
• Operation modes:
• Function and arbitrary waveform generator (DC, sine, square/pulse, triangle, ramp, inverse ramp, sinc, arbitrary)
• Modulation (AM, FM, FSK, PWM)
• Frequency sweep
• Noise