| R&S®HMC8043,R&S®HM8042, R&S®HMC8041 Power Supplies |
| The specifications are based on a 30 min warm-up period. |
| Electrical Specifications |
| Total power output |
100W |
| Maximum power per Channel |
| R&S®HMC8043 |
33W |
| R&S®HMC8042 50W |
| R&S®HMC8041 |
100W |
| Voltage Output |
0-32V |
| Current Output |
| R&S®HMC8043 |
3A max (power limit) |
| R&S®HMC8042 |
5A max |
| R&S®HMC8041 |
10A max |
| Number of outputs |
| R&S®HMC8043 |
3 |
| R&S®HMC8042 |
2 |
| R&S®HMC8041 |
1 |
| Line & load regulation (Sense connected) |
| Constant voltage |
| R&S®HMC8043 |
<0.02% + 3mV |
| R&S®HMC8042 |
<0.03% + 5mV |
| R&S®HMC8041 |
<0.03% + 5mV |
| Constant Current |
| R&S®HMC8043 |
<0.03% 200μA |
| R&S®HMC8042 |
<0.03% 200μA |
| R&S®HMC8041 |
<0.03% 200μA |
| Voltage ripple 20Hz to 20MHz(Front connector) |
450μV rms/ 4mVpp |
| Current ripple 20Hz to 20Mhz |
typ. <1mArms |
| Response time(10%...90% load change) |
1ms (±20mV) |
| Remote Sense max. voltage |
1V |
| Programming accuracy (23° C ±5° C) |
| voltage |
all models: <0.05% +2mV |
| current |
| R&S®HMC8043 |
0.05% +2mA |
| R&S®HMC8042/41 |
0.1% +5mA |
| Readback accuracy (23° C ± 5° C) |
| voltage all models |
<0.05%+2mV |
| current |
| R&S®HMC8043 |
0.05% +2mA |
| R&S®HMC8042 |
0.05% +7mA |
| R&S®HMC8041 |
0.05% +4mA |
| Resolution |
| voltage |
1mV |
| current |
0.1mA (I<1A)
1mA (I>=1A) |
| Voltage to earth |
250VDC |
| Reverse Voltage |
33V max. |
| Inverse Voltage |
0.4V max. |
| Max. current allowed in case of inverse voltage |
3A |
| Supplemental characteristics |
| Front connectors |
m4 mm saftey sockets |
| Rear connectors |
Wago male connector (713-1428/037-000),
8x2-pole, pin spacing 3.5 mm / 0.138 in |
| Temperature coefficient for 12 months (per K)±(% of output + offset) |
voltage: >0,02% +3mV
current: >0,02%+3mA |
| |
|
| Output voltage overshoot during turn-off of AC power and channel output on |
100mV |
| Over temperature protection |
Yes |
| Voltage programming speed (within 1 % of total excursion) |
| Positive voltage change |
| no load |
10ms + μC-time |
| with resistive load |
10ms + μC-time |
| Negative voltage change |
| no load |
500ms + μC-time |
| with resistive load |
10ms + μC-time |
| Command processing time |
<30ms |
| Over Voltage Protection |
Yes |
| Over Power Protection |
Yes |
| Energiemeter |
Yes |
| EasyRamp |
Yes |
| EasyRamp time |
10ms ... 10s |
| Electronic Fuse |
| Fuse trip time |
<100us |
| Fuse linking |
<100us + trip time of linked channel |
| Fuse delay |
10ms ... 10s |
| Analog Interface |
| Shunt resistance 4...20mA |
250 Ohm |
| Input resistance 0...10V |
>10 kOhm |
| Update rate V/I interface |
10 changes/sec |
| Response time V/I interface |
<150ms |
| Trigger level |
TTL |
| Trigger response time |
<1ms |
| Resolution |
14 bit |
| Arbitrary (EasyARB) |
| Parameter |
Voltage, current, time and interpolation mode |
| Number of Points |
512 |
| Dwell time |
10ms ... 10min |
| Repetition rate |
continous or burst mode with 1...255 repetitions |
| Trigger |
manually, interface or trigger input |
| Logging |
| Sampling speed |
1000,100,10,1...3600 Sa/s |
| Resolution ¸HMC8043 |
1mV / 0.1mA (<100Sa/s);
10mV / 1mA (1000Sa/s) |
| Resolution ¸HMC8042/41 |
1mV / 1mA (<100Sa/s);
10mV / 10mA (1000Sa/s) |
| Memory |
Internal memory and External memory(USB-Stick) |
| Maximum number of Points |
limited by memory |
| Sequencing |
| Synchronicity |
<100us |
| Delay per channel |
1ms ... 60s |
| Remote interfaces |
USB-TMC, USB-CDC (Virtual COM), LAN(LXI), GPIB (optional) |
| Miscellaneous |
| Input power option |
100-240 VAC +/-10% 50/60 Hz |
| Maximum input power |
200W |
| Fuse |
T3, 15L 250V |
| Operating temperature |
+0°C ..+40°C |
| Storage temperature |
-20°C..+70°C |
| Humidity |
5...80% |
| Display |
3,5” / QVGA |
| Dimensions (H x W x D) |
222 x 88 x 280 mm |
| Rack mount capability 1/2 19“ |
Yes |
| Weight |
2,6kg |