| Rohde and Schwarz FSL-K8 Specification |
| The specifications below are based on the data sheet specifications of the R&S FSL spectrum analyzer and have not been checked separately. Specifications apply under the following conditions: Unless otherwise stated, these specifications are with RF input level +20 dBm to –40 dBm within the Bluetooth band (ISM) 2400 MHz to 2483.5 MHz and default settings. |
| Output power |
| Measurements |
|
average and peak power in line with
Bluetooth RF test specification 2.0.E.3,
5.1.3 |
| Level range |
|
-40 dBm to + 20 dBm |
| Level uncertainty |
|
< 0.7 dB |
| Packet type |
|
longest supported (DH1, DH3, DH5) |
| Payload |
|
PRBS9 |
| Synchronization |
|
RF burst, access code |
| Trigger |
|
IF power, external, free run |
| Modulation characteristics |
| Measurements |
|
FM deviation in line with Bluetooth
RF test specification 2.0.E.3, 5.1.9
Δf1max, Δf2max, Δf1avg, Δf2avg and Δf2avg/Δf1avg |
| Deviation range |
|
±250 kHz |
| Deviation uncertainty |
signal level > -25 dBm, 10 averages |
< 6 kHz |
| Packet type |
|
all supported (DH1, DH3, DH5) |
| Payload |
|
10101010 and 10000, auto detect |
| Synchronization |
|
access code |
| Trigger |
|
IF power, external, free run |
| Initial carrier frequency tolerance (ICFT) |
| Measurements |
|
ICFT in line with Bluetooth RF test
specification 2.0.E.3, 5.1.10 |
| Measurement range |
|
±250 kHz |
| Measurement uncertainty |
signal level > -30 dBm |
< 3 kHz + carrier frequency × reference error |
| Packet type |
|
DH1 and all supported (DH1, DH3, DH5) |
| Payload |
|
PRBS9 |
| Synchronization |
|
access code |
| Trigger |
|
IF power, external, free run |
| Carrier frequency drift |
| Measurements |
|
carrier frequency drift in line with
Bluetooth RF test specification 2.0.E.3,
5.1.11 drift/packet and drift/50 µs |
| Measurement range |
|
±250 kHz |
| Uncertainty |
signal level > -30 dBm |
< 5 kHz |
| Packet type |
|
all supported (DH1, DH3, DH5) |
| Payload |
|
10101010 |
| Synchronization |
|
access code |
| Trigger |
|
IF power, external, free run |
| Adjacent channel power (ACP) |
| Measurements |
|
adjacent channel power in line with
Bluetooth RF test specification 2.0.E.3,
5.1.8 |
| Level range |
|
max. +20 dBm |
| Packet type |
|
DH1 |
| Payload |
|
PRBS9 |
| Synchronization |
|
none |
| Trigger |
|
external, free run |
| EDR relative TX power |
| Measurements |
|
GFSK and DPSK power in line with
Bluetooth RF test specification 2.0.E.3,
5.1.12 |
| Measurement range |
|
-40 dBm to +20 dBm |
| Level uncertainty |
|
< 0.7 dB |
| Packet type |
|
2-DHx, 3-DHx, 2-EVx, 3-EVx |
| Payload |
|
PRBS9 |
| Synchronization |
|
GFSK access code and DPSK
synchronization sequence |
| Trigger |
|
IF power, external, free run |
| EDR frequency stability |
| Measurements |
|
frequency error initial (ωi), per block (ω0)
and total (ωi + ω0) in line with Bluetooth
RF test specification 2.0.E.3, 5.1.13 |
| Measurement range |
|
±250 kHz |
| Uncertainty |
frequency error initial,
signal level > -25 dBm |
< 1 kHz + carrier frequency × reference error |
frequency error per block,
signal level > -25 dBm |
< 1 kHz |
| Packet type |
|
2-DHx, 3-DHx, 2-EVx, 3-EVx |
| Payload |
|
PRBS9 |
| Synchronization |
| Trigger |
|
IF power, external, free run |
| EDR modulation accuracy |
| Measurements |
|
RMS, peak and 99 % DEVM in line with
Bluetooth RF test specification 2.0.E.3,
5.1.13 |
| Uncertainty |
RMS, signal level > -25 dBm |
< 3 % |
| peak, signal level > -25 dBm |
< 8 % |
| Packet type |
|
2-DHx, 3-DHx, 2-EVx, 3-EVx |
| Payload |
|
PRBS9 |
| Synchronization |
|
GFSK access code and DPSK
synchronization sequence |
| Trigger |
|
IF power, external, free run |
| EDR differential phase encoding |
| Measurements |
|
bit error detection in line with Bluetooth
RF test specification 2.0.E.3, 5.1.14 |
| Packet type |
|
2-DHx, 3-DHx, 2-EVx, 3-EVx |
| Payload |
|
PRBS9 |
| Synchronization |
|
GFSK access code and DPSK
synchronization sequence |
| Trigger |
|
IF power, external, free run |
| EDR in-band spurious emissions |
| Measurements |
|
adjacent channel power and power
between 1 MHz and 1.5 MHz from carrier
in line with Bluetooth RF test
specification 2.0.E.3, 5.1.15 |
| Level range |
|
max. +10 dBm |
| Packet type |
|
2-DHx, 3-DHx, 2-EVx, 3-EVx |
| Payload |
|
PRBS9 |
| Synchronization |
|
gated measurement |
| Trigger |
|
IF power, external, free run |