Rohde and Schwarz FPL1-B9-7 - Internal Generator Option for FPL1007

Name: Rohde and Schwarz FPL1-B9-7 - Internal Generator Option for FPL1007
Brand: Rohde & Schwarz
SKU: Rohde & SchwarzFPL1-B9-7
Price: 5160.00 USD
Availability: InStock

0 reviews | Catalog: 1323.1925.07 | Model: Rohde & Schwarz FPL1-B9-7

Compare

Internal Generator 5 kHz - 7.5 GHz (for R&S FPL1007, FPL1014, FL1026, factory fitted option) - not for FPL1003

Internal generator option for the FPL1007, FPL1014, and FL1026 spectrum analyzers
5 kHz to 7.5 GHz
Not for use with FPL1003
See part FPL1-B9-3 for FPL1003
This is a factory-installed option that can not be retrofitted
See attached data sheet in the Manuals/Guides section of this page for detailed specifications

View Product Details

Your Price: $5,160.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded.
Request a Demo

View Payment Options

Request Quote

Items in This Series



Product	Rohde & Schwarz FPL1-B9-7 Internal Generator 5 kHz - 7.5 GHz (for R&S FPL1007, FPL1014 ...	Rohde & Schwarz FPL1-B4 OCXO, precision frequency reference, aging/Year: < 1x10-7, Temp.-d ...	Rohde & Schwarz FPL1-B40 Extension to 40 MHz signal analysis bandwidth (software license) ...	Rohde & Schwarz FPL1-B5 Additional interfaces: User port, noise source control, power sens ...	Rohde & Schwarz FPL1-B9-3 Internal Generator 5 kHz - 3 GHz (for R&S FPL1003, factory fitte ...	Rohde & Schwarz FPL1-B19 Second hard disk for R and S FPL1000, premounted on PC-board, inc ...	Rohde & Schwarz FPL1-B25 1 dB steps for the electronic attenuator (software license)	Rohde & Schwarz FPL1-B30 DC Power supply for 12/24 V supply voltage, plug-in unit (hardwar ...	Rohde & Schwarz FPL1-B31 Li-Ion battery pack for internal battery slot, includes charging ...	Rohde & Schwarz FPL1-B10 Additional interface for remote control by GPIB, plug-in unit (ha ...
Price
In Stock
Compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare	Add to compare

Recommended for you

Scalar network analysis made simple

Equipped with the R&S®FPL1-B9 option, the R&S®FPL1000 offers an internal CW source and a tracking generator for quick and easy measurements of frequency response, filters and attenuation. The n-dB down marker determines the 3 dB bandwidth of a bandpass filter at the press of a button. Precision is enhanced by through, short and open normalization methods.

Notes:

This option is available with two different catalog numbers, 1323.1925.03 (TEquipment part # FPL1-B9-3) and 1323.1925.07 (TEquipment part # FPL1-B9-7). Please ensure that you order the correct part number for your model spectrum analyzer. See the bullet points above for clarification.

This product can not be retrofitted. You must order it when purchasing a new spectrum analyzer.

Frequency
Frequency range	5kHz to 7.5GHz
Setting resolution	independent CW source	0.01 Hz
Frequency offset
Setting range		0 Hz to fmax⁸
Setting resolution		0.01 Hz

Spectral purity
SSB phase noise	frequency =1 GHz, output level = 0 dBm
	carrier offset = 10 kHz	< –102 dBc (1 Hz), typ. –108dBc (1 Hz)
	carrier offset = 100 kHz	< –105 dBc (1 Hz), typ. –111dBc (1 Hz)
	carrier offset = 1MHz	< –117 dB (1 Hz), typ. –130dBc (1 Hz)
Harmonics	output level = 0 dBm
	5 kHz ≤ f < 100kHz	< –30 dBc(nom.)
	100 kHz ≤ f ≤ 7.5GHz⁹	< –30dBc
Non-harmonic spurious	output level = 0 dBm
	1 kHz < offset from carrier≤ 4MHz	–35dBc(nom.)
	offset from carrier> 4 MHz	< –35dBc,–45 dBc(typ.)

Level
Specified level range		–50 dBm to 0 dBm
Setting resolution		0.1 dB
Setting range		–60 dBm to +10 dBm
Absolute level uncertainty	frequency = 50MHz, +20 °C to +30 °C, output level = –10 dBm, frequency offset = 0 Hz	< 0.5dB
Frequency response	output level = –10 dBm, referenced to level at 50MHz, +20 °C to +30 °C, frequency offset = 0 Hz
	100 kHz ≤ f ≤ 3GHz	< 1 dB,
	3 GHz < f ≤ 7.5GHz	< 1.5 dB, < 1dB(typ.)
Level nonlinearity	for specified level range, referenced to -10 dBm output level, +20 °C to +30 °C, f ≥ 100 kHz	≤ 2 dB, < 0.5 dB(typ.)