Recommend to a Friend
good
5.0
fast shipping, nice service. good parts.
on
Sep 26, 2022
Recommend to a Friend
good
5.0
fast shipping, nice service. good parts.
on
Sep 26, 2022
Recommend to a Friend
Excellent Value
5.0
I purchased two of the Rigol ADP0150BNC 50 Ohm Impedance Adapters for use with my new Rigol DS 1202Z-E Digital Oscilloscope. My application is repair of amateur radio transceivers. So far they are doing exactly what I needed them to do; providing impedance matching between the scope inputs and rf outputs of the radios. I would also add they were much more affordable than the alternatives.
Verified Purchase
Charles Hallett Jr on
Jun 29, 2022
Recommend to a Friend
Rigol ADP0150BNC 50 Ohm
5.0
A
on
Oct 24, 2020
Recommend to a Friend
Great quality
5.0
A must have item if your scope lacks 50 ohm inputs.
RJ Roy on
Aug 05, 2020
Recommend to a Friend
Seems great!
5.0
I purchased to use with my ds1202z-e, with my radio Eqipment. After some tests, I’ll update my review
Verified Purchase
Red Culver ~ N0TMY on
Jul 07, 2020
Recommend to a Friend
Review on Rigol ADP0150BNC
5.0
The Rigol ADP0150BNC is a 50 Ohm impedance adapter. It is solidly constructed of nickel plated machined steel. The product was delivered quickly and on time.
on
Jun 07, 2020
Recommend to a Friend
Works great, convenient
5.0
Not an essential part for anyone, but when you need a matched load, this is faster and much, much easier to use!
Verified Purchase
Siyuan Liu on
May 17, 2020
Recommend to a Friend
Great Product
5.0
Great Product
Anonymous on
Apr 10, 2020
Recommend to a Friend
Works Fine
5.0
Works Fine upto 100Mhz.. Sweep to test response..
Verified Purchase
boful on
Dec 25, 2019
Recommend to a Friend
High quality adapter
5.0
This is a very convenient way to convert to a scope that does not directly support 50 ohm inputs (e.g., most cheaper Rigol scopes). Nice build quality and fit.
Verified Purchase
Tom Repetti on
Oct 30, 2019
Recommend to a Friend
Excelent adapter
5.0
Good workmanship and does what you expect, works great.
Verified Purchase
Alexsandre Avila on
Oct 23, 2019
Recommend to a Friend
Nice fit and finish compared to alternative brands
5.0
Compared to no-name terminators, the fit and finish of this quite a step up. The physical quality and tolerances provide for a very reliable mechanical connection.
I do not have the ability to evaluate the specs vs. actual,
but it has performed as expected.
Verified Purchase
Erik Heidt on
Feb 25, 2019
Recommend to a Friend
RIGOLADP0150BNC O/O
5.0
SIMPLE! Everything was simple right from the get go. I ordered the 50 ohm Rigol adapter and received it a few short days later as expected. It came with an assurance option to be sure that I received it-simple. I simply attached it to my test equipment and now I'm getting accurate measurements on my equipment that would only be found on more expensive equipment - simple. I love it and would recommend TEquipment.Net and this adapter to everyone for simple quick solutions of their electronic needs.
Retired Audio on
Feb 21, 2019
Recommend to a Friend
50 Ohm Impedance Adapter
5.0
Not that this adapter is anything special, because it's not. It did do what I expected, BUT it's the experience with these folks that makes me want to come back. They're knowledgeable, easy to work with and their prices are great. What more can one ask!
Verified Purchase
Anonymous on
Feb 19, 2019
Recommend to a Friend
Really useful adapter
5.0
If your goal is to work professionally and use 50 ohm coaxial, it is necessary to place this terminal to connect the signal to the oscilloscope. Very good quality. Work as expected.
Verified Purchase
Eric Dahlgren /R.Iglesias on
Nov 29, 2018
Recommend to a Friend
Highly recommended - Great price....
5.0
Great price
States good to 1GHz - looked good with tests.
No power rating listed so use caution
Verified Purchase
derf44 on
Nov 23, 2018
Recommend to a Friend
Excelente opción
5.0
Este accesorio potencia el uso del osciloscopio.
Verified Purchase
Fernando Balseca on
Apr 26, 2018
Recommend to a Friend
Rigol ADP0150BNC
5.0
It seems to do what it is meant to do.
Shaun on
Mar 28, 2018
Recommend to a Friend
Good Quality. Works Great.
5.0
Good Quality. Works Great.
Verified Purchase
David Manner on
Feb 16, 2018
Recommend to a Friend
Works great
4.0
Item shipped quickly and was as described. I used this to connect a 10 MHz signal from a GPSDO to a newly purchased RIGOL Oscope to insure it was functioning properly and had a respectable amount of accuracy on the time base. Connections was made direct using 50 ohm coax with no issues at all. My only concern is the power rating is not marked on the adapter.
Verified Purchase
Clarence Canterbury on
Jan 18, 2018
Recommend to a Friend
Must have
5.0
At first it seems unimportant to have this adapter but if you are using 50 ohm coaxials , you must use one of these to properly terminate your signal path on a high impedance input device like an oscilloscope
Verified Purchase
Evren Tevfik Isci on
Jul 07, 2017
Recommend to a Friend
Just rite
5.0
Tested it on my tracking generator on a spectrum analyzer and it did what it said it could do for band range. Then tested well terminating from the 50 ohms coax off the function generator going into the oscilloscope scope for the price.
Want anything better brake the piggy bank Certified precision units lab grade are not cheap.
Detimothy on
Sep 20, 2016
Recommend to a Friend
Awesome Product and Great Customer Service..
5.0
Awesome Product and Great Customer Service..
jason standhope on
Nov 18, 2015
Recommend to a Friend
Rigol ADAPTOR-50-OHM 50 Ohm Impedance Adapter
5.0
Very well manufactured and is a good value. Good quality and performance, has very minimal through loss and great return loss across a few hundred MHz bandwidth. This can be used with oscilloscope inputs as well as for waveform test signal generators.
Verified Purchase
Casey on
Oct 25, 2015
Recommend to a Friend
ADAPTOR-50-OHM
5.0
Arrived and worked as expected. This is one of those adapters you can not do without. Workmanship was good and price was OK.
Larry on
Jul 28, 2015
Recommend to a Friend
Not as pictured on website
5.0
The new adapter is slicker in design and looks more like a BNC attenuator by someone like Minicircuits. This tiny thing showed up in a huge 10" x 6" box which I felt was unnecessary for a 1" long BNC adapter as a small bubble mailer should of covered it just fine. Anyway the device makes an input to your oscilloscope appear as 50 ohms so you can test small radio transmitters. Don't get too crazy because it looks like it can only handle 250mW or so, but should be good for QRP radios and most exciters.
Verified Purchase
Matthew Krick on
Jun 16, 2015
Recommend to a Friend
Rigol Oscilloscope
5.0
Great, Fast, helpful service , and with a Discount too
Thank you Again
Anonymous on
Apr 23, 2015
Recommend to a Friend
Better than the picture.
5.0
You see an old picture ( square compartment for 50 Ohms resistor ). In reality you are getting a new smaller design like a BNC connector. Imagine it without square part with rigol name, but only 1/4" longer.
Verified Purchase
Anonymous on
Apr 21, 2015
Recommend to a Friend
Not as pictured better
5.0
These are much than the photo. They are small coaxial and spot on. You really need one for every input you are likely to use for RF on a scope. Great value solid construction.
Verified Purchase
Anonymous on
Mar 07, 2015
No reviews found to display for this rating.