Rigol RP5600A Oscilloscope 600 MHz Passive High Resistance Probe

Name: Rigol RP5600A Oscilloscope 600 MHz Passive High Resistance Probe
Brand: Rigol
SKU: RigolRP5600A
Price: 457.00 USD
Availability: InStock

0 reviews | Catalog: RP5600A | Model: Rigol RP5600A

Rigol RP5600A Passive High Resistance Probe

Compare

600 MHz Bandwidth 10:1 Passive Probe Kit (these ship standard with DS6000 Series Oscilloscopes)

Up to 600 MHz analog bandwidth
Precise and tenuous probe tip
Auto identification of the probe attenuation ratio (when supported by the oscilloscope)
Firm, durable and retractable normal probe hook
Equipped with many kinds of ground lines to connect to different earth terminals

View Product Details

List Price: $457.00

In Stock:

View Payment Options

Recommended for you

Rigol RP5600A Oscilloscope 600 MHz Passive High Resistance Probe

The RIGOL RP5600A passive probe provides up to 600 MHz bandwidth and uses modular structure allowing users to replace the probe tips. The probe has compact structure and uses snap-on BNC connector for easy connection with the oscilloscope.

RP5600A must be used with oscilloscopes that have a common terminal at ground potential (complying with OSHA requirements and the National Electric Code). Exposed metal surfaces of the probe and the oscilloscope must be grounded. Failure to ground the common terminal during certain applications, such as those requiring the oscilloscope to be powered from external battery, might expose the operator to an electrical shock hazard that could be lethal (depending on the voltage and current conditions).

The probe bracket can facilitate your circuit testing. Users can place the probe on the bracket to spare their hands. As shown in the figures on the next page, insert the probe into the proper hole on the bracket and connect the probe tip to the point to be tested, then place the whole equipment to a proper position.

Specification
Performance Specification
Bandwidth	DC to 600 MHz
Attenuation Ratio	Fixed at 10:1
Input Impedance	10 MΩ±2%
Input Capacitance	12 pF±1 pF
Max. Input: AC RMS.	12kV CAT II
Maximum Input	CAT II 300VAC[1]
Compensation Range	6 pF to 26 pF
General Specification
Operation Environment	Temperature: 0 °C to 50 °C Humidity: 0 RH to 80% RH
Storage Environment	Temperature: -20 °C to 60 °C Humidity: 0 RH to 90% RH
Size	142±2 cm
Weight	Approximately 48±2 g
Temp. Coefficient	≤ 200 PPM / °C
Note: [1] CAT I and CAT II Definitions Installation Category (Overvoltage Category) I: signal level, special equipment or parts of equipment, telecommunication, electronic, etc., with smaller transient voltages than installation category (Overvoltage Category) II. Installation Category (Overvoltage Category) II: local level, appliance, portable equipment etc., with smaller transient voltages than installation category (Overvoltage Category) III

Rigol Probes - Overview Specification
Model number	Attenuation ratio	Bandwidth	Input R	Max. Input voltage	Rigol scope compatibility	Recommended applications
Passive high resistance probe
RP2200	1:1 or 10:1	1x: DC...7 MHz 10x: DC...150 MHz	1x: 1 MΩhm ±2% 10x: 10 MΩhm ±2%	1x: CAT II 150 VAC 10x: CAT II 300 VAC	All Rigol scopes	Small signal test (1x), general purpose test
RP3300A	10:1	10x: DC...350 MHz	10x: 10 MΩhm ±2%	10x: CAT II 300 VAC	All Rigol scopes	Small signal test (1x), general purpose test
RP3500A	10:1	DC...500 MHz	10 MΩhm ±2%	CAT II 300 VAC	All Rigol scopes	General purpose test
RP5600A	10:1	DC...600 MHz	10 MΩhm ±2%	CAT II 300 VAC	DS4000 series*, DS6000 series	General purpose test
Passive low resistance probe
RP6150A	10:1	DC...1.5 GHz	500 Ωhm ±10 Ωhm	CAT I 7 VAC	DS4000 series*, DS6000 series	High frequency signal ended small signal test
Passive high voltage probe
RP1300H	100:1	DC...300 MHz	100 MΩhm	CAT I 2000 V(DC+AC) CAT II 1500 V(DC+AC)	All Rigol scopes	High voltage test
RP1010H	1000:1	DC...40 MHz	100 MΩhm, 3 pF ±0.5 pF	0...10 kVDC, AC pulse ≤20 kVpp/sine =7 kVRMS	All Rigol scopes	High voltage test
RP1018H	1000:1	DC....150 MHz	200 MΩhm, 1.5 pF	CAT II 18 kV(DC+AC) CAT III 12 kV(ACRMS)	All Rigol scopes	High voltage test
Active differential probe
RP7150	10:1	DC...1500 MHz	Differential 50 kΩhm ±2% Single-ended 25 kΩhm ±2%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Differential/single-ended high frequency signal test
RP7080	10:1	DC...800 MHz	Differential 50 kΩhm ±2% Single-ended 24 kΩhm ±2%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Differential/single-ended high frequency signal test
Active single-ended probe
RP7150S	10:1	DC...1500 MHz	100 kΩhm ±1%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Single-ended high frequency signal test
RP7080S	10:1	DC...800 MHz	100 kΩhm ±1%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Single-ended high frequency signal test
High voltage differential
RP1025D	x20, x50, x200	25 MHz	Differential 4 MΩhm/1.2 pF Single-ended 2 MΩhm/2.3 pF	x20: =140 V_pp, (45 V_rms or DC) x50: =350 V_pp, (110 V_rms or DC) x200: =1400 V_pp, (450 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
RP1050D	x100, x200, x1000	50 MHz	Differential 100 MΩhm/1.2 pF Single-ended 50 MΩhm/2.3 pF	x100: =700 V_pp, (230 V_rms or DC x200: =1400 V_pp, (460 V_rms or DC) x500: =3500 V_pp, (1140 V_rms or DC) x1000: =7000 V_pp, (2300 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
RP1100D	x100, x200, x1000	100 MHz	Differential 100 MΩhm/1.2 pF Single-ended 50 MΩhm/2.3 pF	x100: =700 V_pp, (230 V_rms or DC) x200: =1400 V_pp, (460 V_rms or DC) x500: =3500 V_pp, (1140 V_rms or DC) x1000: =7000 V_pp, (2300 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
* incl. MSO4000

Test Equipment General Attributes
Unique Features	Bandwidth DC ~ 600 MHz Maximum Input voltage CAT II 300VAC Cable Length 1.4 m
Safety Approval	CE
Product Weight	0.46 LBS
Product Height	13.00 IN
Product Length	8.00 IN
Product Width	15.00 IN
Shipping Weight	0.49 LBS
Data Logging	No
HTS/Schedule B Number	9030908961
ECCN Number	3A992.a
Country of Origin	China
Shipping Height	13.00 IN
Shipping Length	8.00 IN
Shipping Width	15.00 IN