Rigol RP3500A Oscilloscope 500 MHz Passive High Resistance Probe

Name: Rigol RP3500A Oscilloscope 500 MHz Passive High Resistance Probe
Brand: Rigol
SKU: RigolRP3500A
Price: 231.00 USD
Availability: InStock

0 reviews | Catalog: RP3500A | Model: Rigol RP3500A

Compare

500 MHz Passive Probe

Bandwidth: DC ~ 500MHz
Damping factor: 10: 1
Input resistance: 10M ± 2%
Input capacitance: 13pF ± 3pF
Maximum input voltage: CAT II 300V AC
Compensation range: 6PF ~ 24pF

View Product Details

Your Price: $231.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99 - Code: FREESHIP
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded. - USE CODE FREESHIP at checkout

Valid on Web Price Only!
View Payment Options

Request Quote

Items in This Series


Product	Rigol RP3500A 500 MHz Passive Probe	Rigol PVP2150 150 MHz Passive Probe with 1x:10x selector. With bandwidth of 35 MHz in 1x m ...	Rigol PVP2350 PVP2350 -- 350 MHz Passive Probe with 1x:10x selector. With bandwidth of 35 ...
Price
In Stock
Compare	Add to compare	Add to compare	Add to compare

Recommended for you

Rigol RP3500A Oscilloscope 500 MHz Passive High Resistance Probe

Passive high impedance probe DC-500 MHz, Attenuation Ratio 10x maximum input voltage 300 VRMS CAT II, the input impedance of 10 megohms / 13pF. Rigol oscilloscope series DS1000B / D / E / CA / Z / ZS, DS2000, DS / MSO4000, DS6000

For digital oscilloscopes, the signal under test needs to be connected to the measurement channel via various oscilloscope probes or 50 ohm cables.The Probing is very important to making quality measurements. If the probe performance is not adequate or if you did not select the proper probe for your application, you will see distorted or misleading signals on your oscilloscope.

There are two kinds of probes, one is passive probe, another one is active probe. active probe requires power while passive probe does not. For general-purpose measurements(<600MHz), passive high-impedance resistor divider probes are good choices in general. For high-frequency applications (>600 MHz), active probes are the way to go. They cost more than passive probe and their input voltage is limited, but because of their significantly lower capacitive loading, they give you more accurate insight into fast signals.

Specification
Bandwidth	DC~500MHz
Attenuation Ratio	10:1 (Fixed)
Input Resistance	10MΩ ±2%
Input Capacitance	13pF±3pF
Max. Input voltage	CAT II 300VAC
Compsensation Range	6pF ~ 24pF
General Specications
Operation Environment	0~50°C,0~80%RH
Storage Temperature	-20~60°C, 0~90%RH
Size	140±2cm
Weight	About 56g

Rigol Probes - Overview Specification
Model number	Attenuation ratio	Bandwidth	Input R	Max. Input voltage	Rigol scope compatibility	Recommended applications
Passive high resistance probe
RP2200	1:1 or 10:1	1x: DC...7 MHz 10x: DC...150 MHz	1x: 1 MΩhm ±2% 10x: 10 MΩhm ±2%	1x: CAT II 150 VAC 10x: CAT II 300 VAC	All Rigol scopes	Small signal test (1x), general purpose test
RP3300A	10:1	10x: DC...350 MHz	10x: 10 MΩhm ±2%	10x: CAT II 300 VAC	All Rigol scopes	Small signal test (1x), general purpose test
RP3500A	10:1	DC...500 MHz	10 MΩhm ±2%	CAT II 300 VAC	All Rigol scopes	General purpose test
RP5600A	10:1	DC...600 MHz	10 MΩhm ±2%	CAT II 300 VAC	DS4000 series*, DS6000 series	General purpose test
Passive low resistance probe
RP6150A	10:1	DC...1.5 GHz	500 Ωhm ±10 Ωhm	CAT I 7 VAC	DS4000 series*, DS6000 series	High frequency signal ended small signal test
Passive high voltage probe
RP1300H	100:1	DC...300 MHz	100 MΩhm	CAT I 2000 V(DC+AC) CAT II 1500 V(DC+AC)	All Rigol scopes	High voltage test
RP1010H	1000:1	DC...40 MHz	100 MΩhm, 3 pF ±0.5 pF	0...10 kVDC, AC pulse ≤20 kVpp/sine =7 kVRMS	All Rigol scopes	High voltage test
RP1018H	1000:1	DC....150 MHz	200 MΩhm, 1.5 pF	CAT II 18 kV(DC+AC) CAT III 12 kV(ACRMS)	All Rigol scopes	High voltage test
Active differential probe
RP7150	10:1	DC...1500 MHz	Differential 50 kΩhm ±2% Single-ended 25 kΩhm ±2%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Differential/single-ended high frequency signal test
RP7080	10:1	DC...800 MHz	Differential 50 kΩhm ±2% Single-ended 24 kΩhm ±2%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Differential/single-ended high frequency signal test
Active single-ended probe
RP7150S	10:1	DC...1500 MHz	100 kΩhm ±1%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Single-ended high frequency signal test
RP7080S	10:1	DC...800 MHz	100 kΩhm ±1%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Single-ended high frequency signal test
High voltage differential
RP1025D	x20, x50, x200	25 MHz	Differential 4 MΩhm/1.2 pF Single-ended 2 MΩhm/2.3 pF	x20: =140 V_pp, (45 V_rms or DC) x50: =350 V_pp, (110 V_rms or DC) x200: =1400 V_pp, (450 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
RP1050D	x100, x200, x1000	50 MHz	Differential 100 MΩhm/1.2 pF Single-ended 50 MΩhm/2.3 pF	x100: =700 V_pp, (230 V_rms or DC x200: =1400 V_pp, (460 V_rms or DC) x500: =3500 V_pp, (1140 V_rms or DC) x1000: =7000 V_pp, (2300 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
RP1100D	x100, x200, x1000	100 MHz	Differential 100 MΩhm/1.2 pF Single-ended 50 MΩhm/2.3 pF	x100: =700 V_pp, (230 V_rms or DC) x200: =1400 V_pp, (460 V_rms or DC) x500: =3500 V_pp, (1140 V_rms or DC) x1000: =7000 V_pp, (2300 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
* incl. MSO4000

Test Equipment General Attributes
Unique Features	Bandwidth: DC ~ 500MHz Maximum input voltage: CAT II 300V AC Cable Length 1.4 m
Safety Approval	CE
Product Weight	0.12 LBS
Product Height	0.75 IN
Product Length	8.00 IN
Product Width	5.75 IN
Data Logging	No
HTS/Schedule B Number	9030908961
ECCN Number	3A992.a
Country of Origin	China
Shipping Height	0.75 IN
Shipping Length	8.00 IN
Shipping Width	5.75 IN