Rigol RP1300H Oscilloscope DC-300MHz Passive High Voltage Probe

Name: Rigol RP1300H Oscilloscope DC-300MHz Passive High Voltage Probe
Brand: Rigol
SKU: RigolRP1300H
Price: 243.00 USD
Availability: InStock
Rating: 4.00 (2 reviews)

4 (2 Reviews) | Catalog: RP1300H | Model: Rigol RP1300H

Rigol RP1300H Passive High Voltage Probe

Compare

100:1 300 MHz TO 2KV PASSIVE PROBE

Bandwidth DC-300 MHz to 2kV Passive Probe
Attenuation Ratio: 100:1
Max. Input voltage CAT|2000V(DC+AC) CAT||1500V(DC+AC)

View Product Details

Your Price: $243.00

Sign-in for EDU Pricing!

In Stock:

Free shipping over $99
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded.
View Payment Options

Request Quote

Items in This Series



Product	Rigol RP1300H 100:1 300 MHz TO 2KV PASSIVE PROBE	Rigol RP1018H High Voltage Probe with 150MHz bandwidth, 18kV max DC voltage, 1000:1	Rigol RP1010H High Voltage Probe with 40MHz bandwidth, 10kV max DC voltage, 1000:1
Price
In Stock
Bandwidth Range Max	300 MHz (0.3 GHz)	150 MHz (0.15 GHz)	40 MHz (0.04 GHz)
Compare	Add to compare	Add to compare	Add to compare

Recommended for you

Rigol RP1300H Oscilloscope DC-300MHz Passive High Voltage Probe

Oscilloscope High Voltage Probe

Bandwidth: DC ~ 300 MHz
Attenuation ratio: 100:1 (fixed)
Rising time: 1.2 ns
Input resistance: 100 MΩ
Input capacitance: 5.5 pF

RP1300H is provided with some accessories designed to make probing and measurement simpler.

For digital oscilloscopes, the signal under test needs to be connected to the measurement channel via various oscilloscope probes or 50-ohm cables. Probing is very important in making quality measurements. If the probe performance is not adequate or if you did not select the proper probe for your application, you will see distorted or misleading signals on your oscilloscope.

There are two kinds of probes, one is a passive probe, another one is an active probe. the active probe requires power while passive probe does not. For general-purpose measurements(<600MHz), passive high-impedance resistor divider probes are good choices in general. For high-frequency applications (>600 MHz), active probes are the way to go. They cost more than a passive probe and their input voltage is limited, but because of their significantly lower capacitive loading, they give you more accurate insight into fast signals.

Accessory Features

RP1300H is provided with several accessories designed to make probing and measurement simpler. Please take a moment to familiarize yourself with these accessories and their users.

Specification
Max. Working Voltage	CAT1 2000V (DC+AC), CAT II 1500 V (DC+AC)
Bandwidth	DC ~ 300 MHz
Attenuation Ratio	100:1 (fixed)
Rising Time	1.2 ns
Input Resistance	100 MΩ
Input Capacitance	5.5 pF
Capacitance Adjustment	10 pF ~ 35 pF
Max. Input voltage	1X:CAT\|\|150V AC 10X:CAT\|\|300V AC
Cable Length	Approximate 1.35 meter
Temperature Coefficient	< 200 ppm/°C
Precision of DC	<1%
Operation Temperature	0 ~ 50Ω
Storage Temperature	-20 ~ 70°C
Weight	93 g

Rigol Probes - Overview Specification
Model number	Attenuation ratio	Bandwidth	Input R	Max. Input voltage	Rigol scope compatibility	Recommended applications
Passive high resistance probe
RP2200	1:1 or 10:1	1x: DC...7 MHz 10x: DC...150 MHz	1x: 1 MΩhm ±2% 10x: 10 MΩhm ±2%	1x: CAT II 150 VAC 10x: CAT II 300 VAC	All Rigol scopes	Small signal test (1x), general purpose test
RP3300A	10:1	10x: DC...350 MHz	10x: 10 MΩhm ±2%	10x: CAT II 300 VAC	All Rigol scopes	Small signal test (1x), general purpose test
RP3500A	10:1	DC...500 MHz	10 MΩhm ±2%	CAT II 300 VAC	All Rigol scopes	General purpose test
RP5600A	10:1	DC...600 MHz	10 MΩhm ±2%	CAT II 300 VAC	DS4000 series*, DS6000 series	General purpose test
Passive low resistance probe
RP6150A	10:1	DC...1.5 GHz	500 Ωhm ±10 Ωhm	CAT I 7 VAC	DS4000 series*, DS6000 series	High frequency signal ended small signal test
Passive high voltage probe
RP1300H	100:1	DC...300 MHz	100 MΩhm	CAT I 2000 V(DC+AC) CAT II 1500 V(DC+AC)	All Rigol scopes	High voltage test
RP1010H	1000:1	DC...40 MHz	100 MΩhm, 3 pF ±0.5 pF	0...10 kVDC, AC pulse ≤20 kVpp/sine =7 kVRMS	All Rigol scopes	High voltage test
RP1018H	1000:1	DC....150 MHz	200 MΩhm, 1.5 pF	CAT II 18 kV(DC+AC) CAT III 12 kV(ACRMS)	All Rigol scopes	High voltage test
Active differential probe
RP7150	10:1	DC...1500 MHz	Differential 50 kΩhm ±2% Single-ended 25 kΩhm ±2%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Differential/single-ended high frequency signal test
RP7080	10:1	DC...800 MHz	Differential 50 kΩhm ±2% Single-ended 24 kΩhm ±2%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Differential/single-ended high frequency signal test
Active single-ended probe
RP7150S	10:1	DC...1500 MHz	100 kΩhm ±1%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Single-ended high frequency signal test
RP7080S	10:1	DC...800 MHz	100 kΩhm ±1%	~30 Vp; CAT I	DS4000 series*, DS6000 series	Single-ended high frequency signal test
High voltage differential
RP1025D	x20, x50, x200	25 MHz	Differential 4 MΩhm/1.2 pF Single-ended 2 MΩhm/2.3 pF	x20: =140 V_pp, (45 V_rms or DC) x50: =350 V_pp, (110 V_rms or DC) x200: =1400 V_pp, (450 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
RP1050D	x100, x200, x1000	50 MHz	Differential 100 MΩhm/1.2 pF Single-ended 50 MΩhm/2.3 pF	x100: =700 V_pp, (230 V_rms or DC x200: =1400 V_pp, (460 V_rms or DC) x500: =3500 V_pp, (1140 V_rms or DC) x1000: =7000 V_pp, (2300 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
RP1100D	x100, x200, x1000	100 MHz	Differential 100 MΩhm/1.2 pF Single-ended 50 MΩhm/2.3 pF	x100: =700 V_pp, (230 V_rms or DC) x200: =1400 V_pp, (460 V_rms or DC) x500: =3500 V_pp, (1140 V_rms or DC) x1000: =7000 V_pp, (2300 V_rms or DC)	All Rigol scopes	High voltage differential/single-ended signal test
* incl. MSO4000

Tech Specs

Accessories/Probes/Oscilloscope Probes/Oscilloscope High Voltage Probes Template
Type(probes)	High Voltage
Bandwidth Range Max	300 MHz (0.3 GHz)
Attenuation	100 x
CAT Rating	II
CAT Voltage Rating (V)	1000V
Test Equipment General Attributes
Unique Features	Bandwidth DC ~ 300 MHz Rising Time 1.2 ns Cable Length Approximate 1.35 meter
Product Weight	0.2 LBS
Product Height	1.00 IN
Product Length	9.00 IN
Product Width	5.75 IN
Shipping Weight	1 LBS
Data Logging	No
HTS/Schedule B Number	9030908961
ECCN Number	3A992.a
Country of Origin	China
Shipping Height	1.00 IN
Shipping Length	9.00 IN
Shipping Width	5.75 IN