| Serial Decoding |
| Number of Decodings |
4, four protocol types can be supported at the same time |
| Decoding Type |
Standard: Parallel
Option: RS232, UART, I2C, SPI, LIN, CAN, FlexRay, I2S, and MIL-STD-1553 |
| Parallel |
Up to 20 bits of Parallel decoding, supporting the combination of any analog channel and digital channel. Support userdefined clock and auto clock settings
Source channel: CH1 ~ CH4, D0 ~ D15 |
| RS232/UART |
MSO8000-COMP option
Decode the RS232/UART (up to 20 Mb/s) bus's TX/RX data (5-9 bits), parity (Odd, Even, or None), and stop bits (1-2bits)
Source channel: CH1~CH4, D0~D15 |
| I2C |
MSO8000-EMBD option
Decode the address (with or without the R/W bit) of the I2C bus, data, and ACK.
Source channel: CH1~CH4, D0~D15 |
| SPI |
MSO8000-EMBD option
Decode the MISO/MOSI data (4-32 bits) of the SPI bus. The available mode includes "Timeout" and "CS".
Source channel: CH1~CH4, D0~D15 |
| LIN |
MSO8000-AUTO option
Decode the protocol version (1.X or 2.X) of the LIN bus (up to 20 Mb/s). The decoding displays sync, ID, data, and check sum.
Source channel: CH1~CH4, D0~D15 |
| CAN |
MSO8000-AUTO option
Decode the remote frame (ID, byte number, CRC), overload frame, and data frame (standard/extended ID, control domain, data domain, CRC, and ACK) of the CAN bus (up to 5 Mb/s). The supported CAN bus signal types include CAN_H, CAN_L, TX/RX, and DIFF.
Source channel: CH1~CH4, D0~D15 |
| FlexRay |
MSO8000-FLEX option
Decode the frame ID, PL (payload), Header CRC, Cycle Count, Data, Tail CRC, and DTS of the FlexRay bus (up to 10 Mb/s). The supported signal types include BP, BM, and RX/TX.
Source channel: CH1~CH4, D0~D15 |
| I2S |
MSO8000-AUDIO option
Decode I2S audio bus left channel data and right channel data, supporting 4-32 bits. The alignment modes include I2S, LJ, and RJ.
Source channel: CH1~CH4, D0~D15 |
| MIL-STD-1553 |
MSO8000-AERO option
Decode the MIL-STD-1553 bus signal's data word, command word, and status word (address+last 11 bits)
Source channel: CH1 ~ CH4 |
