Rigol KELVINTESTCLIPDMM Kelvin Probe Set for 4 Wire Resistance Measurements with a DMM

The Kelvin leads have been specially developed for four-wire measurement. The handling of the Kelvin clips is just as simple as in two-wire measurement.

Important Notes

• When connecting the Kelvin leads to the test instrument, please follow the instructions of the instrument manufacturer.
• In order to obtain better heat dissipation, we recommend using the shield of the coaxial cable to carry the current (black arm, black plug) and the internal conductor (red arm, red plug) for the voltage connection.
• In all Kelvin measurements with one pair of XDK-KELVIN, the arms of a given color (red or black) should point in the same direction in order to ensure maximum precision of measurement.

Principle of Four-Wire Measurement
A defined current Iconstant flows through the resistance R, coming from a constant current source. The voltage U over the resistance R can be very accurately measured, as due to the high inner resistance of the voltmeter, the voltage drop on the circuits can be disregarded (see sketch). According to Ohm's law R = U/ Iconstant.