The external calibration is performed with the use of external templates of suitable accuracy and mass that depend on the type and loading capacity. The procedure is semi-automatic while further stages are signaled through messages on the screen.

• Autotest - Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use.
• Statistics - Statistic function registers and analyses performed measurements. This supplies the user with the following information: Max and Min standard deviation, average value, variance, range, etc.
• IR Sensors - Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring, etc.
• GLP Procedures - Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or an extended one.
• Replaceable Units - Replaceable units.
• Statistical Quality Control - Statistical control for determination of basic statistical criteria: maximum, minimum, standard deviation, mean values for each batch, etc.
• ALIBI Memory - "ALIBI" memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key.
• Drying Modes - Method for obtaining maximum drying temperature. There are 4 drying profiles: standard, mild, step, and fast.
• Samples Drying - Drying process enables to determine moisture content of a given sample by evaporating its free water and other components. The sample's moisture content [%M] is determined by means of precise weighing carried out before and during the drying process.
• Moisture Content Analysis - Determination of the sample's moisture content.
• Dray Mass Determination - Determination of product mass after completed technological, physical, and chemical processes enforcing product moisture evaporation. RADWAG moisture analyzers are designed to test the moisture content by heating of the samples, which is done using an IR emitter, a halogen, or a metal heater.
• Wi-Fi - Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a digital audit, responds to your voice commands, and uses ambient light to communicate statuses and alerts?

If so, learn about the functionality of the ELLIPSIS series of balances:

Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity.

Bigger screen - 10" - means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, and handy measurement history.

For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these.

The light colour will tell you about the status, process results, procedures, or alerts.

Use the balance on any device connected to it. This can be a smartphone, tablet, or computer.

ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user.

It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note.

This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found.

Prepared to display what you need most at any given moment.

The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold.

Do you work in the pharmaceutical industry? Do you need a digital signature?

The laboratory balance which, as a standalone, fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11.

Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement.

Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook.