Description
The RIDGID ST-33Q+ Line Transmitter with Bluetooth is the ideal transmitter for inducing current onto a target line. It will also direct connect using any frequency from 10Hz to 490kHz* with power up to 10 Watts. The ST-33Q+ also allows the flexibility of using D-Cell alkaline batteries or 18V rechargeable RIDGID batteries for minimal interruptions on the job. The new Bluetooth feature on the ST-33Q+ allows you to finish complex locates faster by wirelessly changing the transmitted frequency from the SR-24 receiver from up to 200 yards away.
Distance: Inductive mode is where the ST-33Q+ excels. Induce over 8 times more current than traditional transmitters. More current means you can walk and trace further than ever before.
Versatility: Induces at 8 kHz and 33 kHz for low distortion locates. In direct connect mode, theSeekTech ST-33Q+ can transmit at any frequency between 10 Hz and 490,000 Hz making RIDGID SeekTech ST-33Q+ one transmitter that can be used with all receivers.
Speed: More signal equals less retracing of your steps to pick up and move the transmitter. Cut your inductive trace steps in half, by only having to set up the ST-33Q+ once. In direct connect mode, the LCD display gives instant feedback on current flow and line resistance.
Accuracy: Induce more current at lower frequencies. Lower frequencies are less prone to jump onto other lines in congested areas reducing distortion and increasing accuracy.
Remote Use: When used with an SR-24 Bluetooth- enabled locator, control the ST-33Q+ settings from the SR-24’s menu wirelessly. You can change transmitted frequency wirelessly up to 200 yards line-of-sight.