• SeeSnake NanoReel N85S Camera, Reel with SeeSnake monitor connection cable
• Camera Dims: 510 x 496, 15.5mm fixed camera head with LEDs
• Push cable dims: 85ft length x 0.25in diameter (25m x 3.3mm); Ultra Flexibility
• Line capacity: 1in to 2in
• FleXmitter Sonde (inside spring assembly): 512 Hz

The SeeSnake NanoReel Inspection System is a portable pipe inspection diagnostic reel and camera. It comes with a sonde (transmitter) within the camera head and there is also an optional CountPlus counter to measure the pushrod distance traveled. The NanoReel has a unique removable cable drum, for convenience in cleaning or replacing pushrods. The NanoReel uses a 65 foot (20 meters) pushrod with a rigid design, and is built for long run, small diameter inspection needs.

With an appropriate SeeSnake control unit, the operator can connect an external line transmitter and use a standard locator to line-trace the path of the NanoReel pushrod in a pipe.

NanoReel Inspection System Features:

• Lightweight and compact design, easily stowed in a truck, carried onto the jobsite
• Compatible with existing SeeSnake monitors, or the micro CA-350 digital inspection camera
• Designed for long run, small diameter inspection needs
• Ideal for inspections in boiler tubes, supply lines, pools, sprinkler systems, and more
• Removable drum can be swapped with MicroReel/MicroDrain drums
  -L100/L100C – 1.5in to 5in (40-125mm) lines; stiff push cable; 100ft length
  -D30/D65S – 1.5in to 4in (40-100mm) lines; small diameter for tight turns - P-traps, toilet traps; 65ft length
  -N85S – 1in to 2in (25-50mm) lines; ultra-small diameter – tight turns for specialized applications
• Pipe guides included for better in-pipe imaging

1. Front Case

2. Push Cable Guide

3. System Cable for SeeSnake CCU

4. Case Latch

5. Rear Case

6. Camera Clip

7. Camera Head

8. Feet

1. Case Latch

2. System Cable for micro CA-300

3. micro CA-300 Camera Monitor

4. micro CA-300 Connector Plug

5. Cord Wrap

6. Rear Case

7. Feet

8. Slip-Ringe Module