Pomona SCTEST3 - Multi-Mount Continuous Monitor, 500 k? to 10 M? impedance, <50 ns

Name: Pomona SCTEST3 - Multi-Mount Continuous Monitor, 500 k? to 10 M? impedance, <50 ns
Brand: Pomona
SKU: PomonaSCTEST3
Price: 210.25 USD
Availability: InStock

0 reviews | UPC: 195112031193 | Model: Pomona SCTEST3

Compare

Multi-Mount Continuous Monitor, 500 k? to 10 M? impedance, <50 ns

Continuously monitors the path-to-ground integrity of (1) operator and (1) ESD work surface
Operator test range: 500 kΩ to 10 MΩ impedance
Worksurface test range: 10 MΩ (±20%)
Alarm response time: <50 ns
Alarms: visual and audible
Wave Distortion Technology - monitors distortion of the square wave to established patterns
Fast alarm time and minimal false alarms
Continuous visual and audible alarms - green for ok; red and audible alarm (adjustable) if failure
NIST calibrated with certificate

View Product Details

List Price: $234.99

Your Price: $210.25

In Stock:

Free shipping over $99 - Code: FREESHIP
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded. - USE CODE FREESHIP at checkout

Valid on Web Price Only!
View Payment Options

Request Quote

Items in This Series



Product	Pomona SCTEST3 Multi-Mount Continuous Monitor, 500 k? to 10 M? impedance, <50 ns	Pomona HLSTRP1 Foot Grounder, Heel Strap with 1 Megohm Resistor, 30-inch long-Note:Price i ...	Pomona SCTEST2 Combo Wrist Strap and Footwear Tester w/ Foot Plate, 5°C to 40°C, NIST cali ...	Pomona SCMAT3 Static Free Floor Mat, Conductive, Black, 0.080 X 36 X 48 in, w/Grounding Ki ...
Price
In Stock
Compare	Add to compare	Add to compare	Add to compare	Add to compare

Recommended for you

Pomona SCTEST3 - Multi-Mount Continuous Monitor

Continuously monitors the path-to-ground integrity of (1) operator and (1) ESD work surface
Operator test range: 500 kΩ to 10 MΩ impedance
Worksurface test range: 10 MΩ (±20%)
Alarm response time: <50 ns
Alarms: visual and audible

The Pomona SCTEST3 Multi-Mount Continuous Monitor monitors the path-to-ground integrity of one operator and one ESD work surface. The monitor uses Wave Distortion Technology to provide stable continuous monitoring (versus pulse or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 MΩ safety resistor. It monitors for a worksurface path-to-ground of less than 10 MΩ. The Pomona SCTEST3 has mounting tabs for installation to workbench or equipment.

Product Features

Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug, and monitor’s jack is intermittent
Mat monitor switch disables the worksurface monitor circuit when there is no ESD worksurface
1.2V operator test voltage reduces the risk of electrical overstress (EOS) for the handling of sensitive components
˂50 millisecond alarm response time identifies failures and intermittencies
Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
Audible alarm adjustment sets the audible alarm volume from loud to louder
National Institute of Standards and Technology calibrated with certificate included

Mat Monitor Switch: Use a probe to access the mini slide switch. Slide the switch to the right to enable the mat monitor circuit. Slide the switch to the left to disable the mat monitor circuit. This switch is enabled as default.
Buzzer Volume Adjustment: Turn the trimpot clockwise to increase the buzzer volume. Turn the trimpot counter-clockwise to decrease the buzzer volume.

Monitored Operator Jack: Insert the single-wire wrist cord here to monitor the operator's connection to ground.
Operator LEDs: Illuminates green when the operator is properly grounded. Illuminates red and audible alarm sounds when the operator is not properly grounded.
Mat LEDs: Illuminates green when the worksurface is properly grounded. Illuminates red and audible alarm sounds when the worksurface is not properly grounded.
Park Snap: Allows the operator to disconnect (and park) a wrist strap when leaving the workstation, without creating a false alarm. Touch the park snap and the monitor's audible alarm will disable for approximately 10 seconds. Use this time to disconnect the wrist cord from the wristband, and attach it to the park snap or remove the banana plug from the jack. Upon returning to the workstation and disconnecting the wrist cord from the park snap, the operator has approximately 10 seconds to reconnect the wrist cord to a worn wristband before activating the alarm.

Mat Monitor Screw Terminal: Verifies that the worksurface's path-to-ground is ˂10 MΩ. Connect the white mat monitor cord here.
Power Jack: Connect the included 24VDC power adapter here.
Remote Alarm Jack: Connects to a Remote Alarm* accessory.

Test Equipment General Attributes
Product Height	0.9 IN
Product Length	3.89 IN
Product Width	2.09 IN
Shipping Weight	0.2 LBS
HTS/Schedule B Number	8535908060
ECCN Number	EAR99
Country of Origin	United States
Shipping Height	5 IN
Shipping Length	11 IN
Shipping Width	8.00 IN