Pico TA368 - 2000A AC Flex Current Probe, D9 Connector

Name: Pico TA368 - 2000A AC Flex Current Probe, D9 Connector
Brand: Pico
SKU: PicoTA368
Price: 249.00 USD
Availability: InStock

0 reviews | Catalog: TA368 | Model: Pico TA368

Compare

2000A AC flex current probe, D9 connector

AC current probe utilising the Rogowski coil principle
It can be used to measure AC current up to 2000 A when used with the PicoScope 4444
Allows current measurements on conductors with irregular shapes, such as bus bars

View Product Details

Your Price: $249.00

Sign-in for GSA and EDU Pricing!

In Stock:

Free shipping over $99 - Code: FREESHIP
Please note, FREE SHIPPING is only available on items that can ship via standard ground shipping and is only valid within the Contiguous United States. Any items that must ship via freight or to any destination outside of the Contiguous United States will be excluded. - USE CODE FREESHIP at checkout

Valid on Web Price Only!
View Payment Options

Request Quote

Recommended for you

Pico TA368 - 2000A AC Flex Current Probe, D9 Connector

Measuring range: 2000 A AC
Accuracy (45–65 Hz): ±1% of reading ± 1 A
Frequency range: 10 Hz to 20 kHz (–1 dB)

The TA368 is a flexible AC current probe utilizing the Rogowski principle and featuring a built-in integrator. Equipped with the Pico D9 probe interface, it is designed exclusively for use with the PicoScope 4444 True Differential Oscilloscope, which powers the probe and automatically sets the PicoScope software to the correct range and units.

The probe can be used to measure currents up to 2000 A from very low frequencies to 20 kHz. The flexible and lightweight measuring head allows quick and easy installation in hard-to-reach areas and with large conductors. The built-in integrator gives a voltage output directly proportional to the primary current.

Probe coupling
Probe output cable
Flexible current probe - allows current measurements on conductors with irregular shapes, such as bus bars

General Specifications
Measuring range	2000 A AC
Output sensitivity
(AC coupled)	0.7 mV/A
Accuracy (45–65 Hz)	±1% of reading ± 1 A
Minimum load	100 kΩ for specified accuracy
Frequency range	10 Hz to 20 kHz (–1 dB)
Phase (45–65 Hz)	< ±1°
Position sensitivity	±2% of reading
External field	±0.2% of range with cable > 100 mm from the probe
Noise	0.6 A typical
Temperature coefficient	±0.1% / °C
Power supply	5 V nominal via PicoScope 4444
General characteristics
Probe length	610 mm (24”), double-insulated
Probe diameter	9.9 mm (0.39”)
Output cable	2 m (78.7”)
Material	Alcryn 2070 NC, LATI LATENE 7H2W V0
Degree of Protection	IP65
Operating temperature	–20 °C to +65 °C (–4 °F to +149 °F)
Storage temperature	–40 °C to +75 °C (–40 °F to +167 °F)
Operating humidity	15% to 85% (non-condensing)
Safety standards	EN 61010-1 EN 61010-2-032 1000 V RMS Category III 600 V RMS Category IV Rated for continuous use
EMC	EN 61326-2-2
Environmental standards	RoHS and WEEE compliant Pollution Degree 2