Passive Oscilloscope Probe (300 MHz, 2.5 mm, 10:1, BNC, Single Pack)
The P2036 (single pack) is a state-of-the-art 10:1 miniature probe for oscilloscopes with up to 300 MHz bandwidth. The entire probe core is made of a high-quality CeramCore ceramic hybrid. Pure coaxial design and laser-trimmed resistors ensure the highest signal fidelity along the signal path, offering high bandwidth and fast risetimes for accurate impulse measurements. With a maximum input voltage of 300 V CAT II, these probes are equally suitable in service and development environments. The read-out BNC connector is automatically recognized as a 10:1 divider by scopes such as the PicoScope 6000E Series that feature a sense ring.
The compact design with its 2.5 mm housing diameter at the tip provides better visibility on the DUT (device under test) in dense SMT circuits than conventional 5 mm housings.
The input capacitance of 9.5 pF applies a minimal load to the signal source, which is particularly important when measuring signals with fast risetimes. Only active or low-impedance probes can achieve lower loading than this.